Similar Questions

• Satellite A205-S4577 does not recognize the SD card inserted

  Hello

  I have a Satellite A205-S4577.
  I just got 2GB sandisk wake up your phone mem card.
  When I insert the card into my card reader it does not even after that I restart my system.

  Can anyone help?

  Your laptop will recognize standard SD cards?

  There may be a compatibility issue with microSD flash memory cards.

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. For more information, contact Apple.

  < re-titled by host >

  Not sure what your question is. The error message is clear: the device is locked to another carrier. It must be unlocked before you can use the SIM card, you try to use. Contact the carrier to get it resolved. Only they can help you with this.

  See you soon,.

  GB

• Satellite A210 restore failed (error: run the Chkdsk utility)

  I have a Toshiba Satellite A210... When I tried to reform. There, an error came (about 47% in the 'process'); blablablabla... This file is corrupt, run Chkdsk utility...
  Help please?
  Then. Should I try call Toshiba or send it?

  Help me please, anyone? :))

  It's not easy to say what the problem is.

  On the Toshiba website, I founded a updated firmware for drives optical drives in Satellite A210.
  Then, look at the Toshiba site and try this update of the firmware if you have such a unit.

  The next step if you have no success with the update of the firmware, you should try a Microsoft installation disc.
  In addition, it could also be a problem with the HARD drive.
  You can do a test drive with Drive Fitness Test.

• Satellite L650 PXE - E63:error initializing the NIC - error start

  I have a Satellite L650, which is 2 months old.

  The motherboard makes a ticking noise (I think it's what makes noise), and when this noise occurs it causes very slow computer! It has been thus since I got it pretty well.

  Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows. When I restart my computer it runs the windows startup repair 7, found nothing wrong, and restarts the computer. When the computer restarts, the screen stays black for a long time... and then it flashes a blue screen (flash is so quick that I have no idea of what he says) and asks if I want to rerun the repair. I choose not to start windows normally... and the screen goes black for a long time, however there is no ticking noise, but it seems that nothing happens.

  If I force a reboot, I get an error message saying along the lines of;

  For Atheros PCIE Ethernet controller... Check the cable connection
  PXE - E63:error initializing the NIC
  PXE - MOF: exit intel PXE ROM
  No device bootable-insert boot disk and press eny key

  Help, please!

  > Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows.

  Sounds like the HARD drive failure.
  That would explain the PXE Boot error as well.
  This error occurs if the laptop tries to boot from LAN because other sources bootable couldn t be found.

  In my opinion, you need to replace the HARD drive.
  If the warranty is valid, get in touch with a local ASP from Toshiba and ask the new HARD drive

• USB CODE 10 ERROR, complete the automatic entry in case of problem, problem keep after reboot...

  USB CODE 10 ERROR, troubleshoot automated, everything is OK, resart problem comes back after a reboot...

  What is the USB (type, manufacturer, make and model)? What version of vista are you using? The problem occurs if you start in safe mode?

  The following applies in some cases (I don't know if it applies to you but I don "t know the appliance, has no validation of the ccmplete and the message in its entirety (Word for Word), and I don't know if that's what you tried - but here it is anyway):http://support.microsoft.com/kb/933442/.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.  If this isn't the case, then when you have identified the device and answer the other questions, I have more specific recommendations.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get an error code 10 when using the network card.

  Hello

  When you use my internet dongle all my ports usb stopped working. cards network is to come up with and error 10 code. I uninstalled the adapter and re installed however it is always delivered with the same code. If I try to update it says I'm updating but the card still does not work

  Hi Sinead,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  "Code 10" error is generated in the Device Manager in one of the following situations:

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  Note: in this case, the "Code 10" error can be a very generic message indicating some sort of unspecified driver or device problem.

  I suggest you run this Microsoft fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  I hope this information helps.

  Please let us know if you need more help. We will be happy to help you.

  Thank you

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Satellite X 200: Cannot write to the memory card error message

  Hello

  Can help you, I have a X 200 with XP Professional installed I continue to receive errors saying "the memory could not be wrtitten" I returned the machine to your service center, but they said that they could not work on the machine, unless Vista was reinstalled. What can I do?

  It is an error often caused by an application tries to use memory assigned to another program. In some rare cases, this can be a problem material, but really really rare.

  What you can try first is to install all the latest windows updates and check if you have all the newer driver versions. To do this, go to Toshiba European download page.

  If it does not, well, you can reinstall Win XP.
  But, when the pop-up message? A certain program? If so, try to uninstall it and see if the message has disappeared.

• Satellite - WIi 8 - How to use the SD card

  Windows 8 on Toshiba Satellite.
  I do not know how to connect my sd card

  I pop my card to build in reader and now what?
  Nothing happened and I don't know where to find the answer.

  Perhaps you could provide some i.e more details:
  What model of laptop do you have exactly?
  Have you changed anything in the configuration of the system?
  Do you use the Windows system preinstalled by Toshiba?

  Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

• Satellite M70-375: where to find the SD card reader driver?

  Where can I find the drivers for the SD card reader? It is not in the list of all the drivers of the M70 series.

  I checked the s information about this device and it seems that the Satellite M70-375 has a number PSM70E-xxx.
  First you must choose the category good pilot because there are two sets of Satellite M70.
  In addition there is no own available SD card driver. You must install the driver cardbus.
  This driver is also responsible for the use of the SD card.

• Satellite L350D-131 - how to upgrade the graphics card?

  Hi I have a Satellite L350D-131 and have recently upgraded the RAM to 4 GB 800 mhz.

  I'm now looking into upgrading the graphics card and have no idea where to start or how to do. I don't want anything fancy, but better than the one I have, which is the technology Mobile AMD Turion 64, Radeon x 1250

  see you soon

  Sorry, but the graphic card cannot be upgraded. It s soldered on the motherboard and cannot be exchanged.

  Check this Toshiba document for more information:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

• Satellite 4260 it support II 32-bit PCMCIA cards?

  Is my laptop, TOSHIBA boom 4260 support II 32-bit PCMCIA cards? Because I bought a USB 2.0 cardbus and its not working now. Its is cards RCMCIA 32 bit.

  Help, please! Thank you

  Hello

  You can see for yourself when you access the BIOS with pressing ESC after starting upwards. Then go to PCMCIA and see if you see CARDBUS or replace it with CARDBUS

  Good bye