Satellite 1410-303: black vertical banner on the far right of the screen

Hi all

I had to format my Satellite 1410 303, and then I added also 256 MB of RAM so the total is now 512 MB. It works fine but the problem is that now I have a black vertical bar, which covers about one inch from the far right of the screen and when you move the mouse it the "offsets" to the right, but the black bar monitor remains in place. Very annoying.

Also, since I formatted the laptop, I do not have the controls in Toshiba or utility, so I can't change the width of the screen, or perform any other work related operations.

Your help is very appreciated.

As a first step, it will be interesting to know something about the pre-installed OS and drivers. I assume that you used your own CD of facilities and the recovery media not original. Am I right about that?

What drivers you have installed, in particular display driver?

Tags: Toshiba

Similar Questions

  • Satellite Pro A210 - repeat vertical lines on the screen

    I hope someone can help me.

    I am a teacher and was bought by my school a Toshiba Satellite Pro A210 for me to do my school work and connect to a SMART board to teach with. Throughout its probably one of the best laptops I got through school. I got it two months.

    There is only one problem with it. Its developed a rather weird problem. Occasionally, the screen suddenly freezes, and the display will be replaced by thin, alternating vertical black and white lines. The only way to get rid of them is to turn off the laptop and restart it (particularly annoying when it happened in the middle of a lesson when I've been respected by an OFSTEd Inspector!)

    Technician computer school has no idea what is the cause. I was wondering if someone here might have some advice.

    Thanks in advance.

    I ve the same laptop but I didn t receive similar lines on the screen.
    What you could do is update the BIOS and the driver (if possible) display.

    If the same problem happens again, you must connect an external monitor to the laptop.

    Then check if the same lines appears on the external display. If so, then a problem of graphics card might be possible!

  • Problem of monitor Satellite 1410 303 after Windows XP pack 2

    After you install Windows XP Service Pack 2 on my Satellite 1410 303, a vertical strip about an inch of width is lost and remains black on the right side of the screen. Is their a way to fix it?
    Thanks in advance
    George

    Hello

    as a first step, you can uninstall and update your displaydriver of toshiba homepage https://eu.computers.toshiba-europe.com - Support & downloads - driver update

    You reinstall all the drivers after the upgrade to SP2 in the right order? The order could lies in the HTML on CD tools & utilities. It must be done because there may occure problems like yours!

    Try this!

    Pete
    Try this and

  • Satellite 1410-303-the s key is blocked

    Hello, I have a * Toshiba Satellite 1410 303 * and the "s" key is annoying me a lot.

    It does not work either, it keeps on himself. I must + ESC + to stop it. Should I clean under the keyboard? And how there?

    Please answer 4!

    Hello!

    Try to turn off the laptop, press the s key and use the jet of compressed air to remove dirt or something else which is located under the key.

    I hope that it works and if not, I think that you need a new keyboard because it is not possible to Exchange simple keys on the keyboard. :(

    Good bye

  • I want to install the new HDD for Satellite 1410 303

    Can I install the MK8032GAX HARD disk (80 GB Toshiba 2.5 "IDE, 5400 RPM, 16 MB) on my Toshiba Satellite 1410 303? BIOS will detect it?

    Unfortunately there no document on this subject because the HARD drive upgrade is dealer so-called option, and because of this, there is no specific info on the upgrade of the HARD drive. According to the specifications of the laptop, this laptop model comes with 20 GB of HARD drive.

    I'm sure you can use 40 or 60 GB without any problems. About 80 GB I won't speculate, but maybe someone has already tested and will post here in the next few days.

    Good luck!

  • Need BIOS 1.2 for Satellite 1410 303

    Hi all Toshiba Satellite 1410 303 users.

    I'm having a problem with my video card bios.
    My computer's DMI system Version PS141E - 0502 X - VIDEO adapter nVIDIA GeForce4 420 Go (Toshiba),

    The victory of Bios 1.40 toshibas page does not work for me.
    So, if someone could make the backup to its bios,
    I NEED bios version 1.20 (THE ORIGINAL ONE for TOSHIBA 1410-303) will be very happy.

    If you could post it to my email [email protected].
    Tounsiiaa

    Hello

    The latest BIOS 1.4 - winner which is placed on the page of the Toshiba driver is good.
    I put t know why you said that this don't work on your Satellite 1410 but older BIOS versions of the BIOS are not available for download.
    I m not quite sure if an ASP technician could help you but it s worth a try to get in touch with one of the ASP and ask for the old BIOS.

  • Satellite 1410-303-new CPU does not work

    Hi all
    MI name Fabio, I'm an Italian boy, sorry for my bad English...

    I have a problem with my Toshiba Satellite 1410 303, I buy a new processor (Pentium 4 mobile 2 GHz 512 k 400bus) but it does not work.
    When I turn on my laptop, I hear the system Speaker beep contiunos that never stop until I turn off the system.
    I clear CMOS, and then I spend my BIOS with the latest 1.40 version.

    Do you have a solution?

    Thanks for the help

    Bye!

    Hello

    Have you installed the same CPU than before, or have you installed a different CPU?

    I checked the manual of the Satellite 1410 and he normally equipped with an Intel Celeron CPU processor and in my opinion, it is the reason why it doesn't work.
    Upgrading the CPU is not being official and it seems that the motherboard and BIOS don't support this CPU.
    Check this Toshiba document: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    Welcome them

  • Satellite M70-339 vertical lines on the screen

    Hello...

    I have a Satellite M70-339, which will show only the vertical lines on the screen.
    I connected an external monitor and booted in safe mode.
    I uninstalled the display drivers.
    I started to monitor and reinstalled the display drivers.
    The computer will now boot up screen.

    I put the display to indicate to both monitor and screen.

    On the monitor, all right.
    On the screen, I get vertical lines color, similar to a wallpaper (wallpaper is not pretty).

    Did anyone has got any ideas what could be the problem, or how to diagnose the problem
    Any help would be appreciated.

    John C

    If everything is OK on the external monitor that is the best evidence that this problem is related to the internal LCD. Display must be exchanged.

  • New HDD for Satellite 1410 303

    Hi, I need to change the disk HARD-1410-303 can someone tell me the max capacity and how physically change the hd on this laptop?
    I indetified HARD disk location, but I don't understand how to disconnect the HARD disk.

    Thank you and sorry for my English

    Hello

    As far as I know, the machine was delivered with 20 GB of HARD drive.
    After a long search I found a 100 GB HARD disk for this device.
    I think that there is a maximum size.
    Check this box:
    http://www.Kahlon.com/rm30859_Toshiba_Satellite_1410-303.html

    Also it is not very difficult to replace the HARD drive. On the site from the bottom of the laptop, you can find the cover of the HARD drive. You must remove it. As far as I know it s a single screw. Then you can remove safe HDD form Bay.

    Best regards

  • Qosmio G10 has vertical lines on the screen

    I have a G10 which I use for the last 15 months since I bought it.
    However, there are now 4 vertical lines on the screen, 2 Purple (magenta?), 1 yellow and 1 cyan. Other than these lines there are no other problems, it never fell down or something like that.

    The lines are still there, they do not change in any way and are always in the same place. They appear on the screen at first power up, before the Qosmio logo lights up.

    They have not all appear at the same time, they all appeared individually in the past two months. I've seen the last of them disappear briefly, then stay on.

    I guess that my screen is dying slowly, I guess to be an expensive item.

    Any advice thrown my way would be greatly appreciated!

    I took a picture of the screen you will find at:

    http://www.imagebucket.NET/images/lldata/displaylines.jpg

    Note: the photo was taken with Media Player full screen on a black image, just to clearly show the lines)

    Hello

    I suggest you connect an external display to check if it's a graphics card or a display problem. If cela pipes appears also on the external screen then it could also be a problem with the graphics card.
    If these lines do not appear on the external display while the display of the laptop has a malfunction.
    However, this does not change your situation. I recommend you contact the Toshiba ASP to solve this problem.

  • Qosmio G15: Green vertical lines on the screen

    All started an ordinary day, when I was playing music on my iTunes.
    All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

    I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
    I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

    -Alexis

    Hello

    You can enter operating system in SafeMode using F8 t the beginning upward?

  • Qosmio G10 begins with vertical lines on the screen

    Hello, can anyone help?

    When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
    In VGA mode, it begins upward, but always with the lines on the screen.
    Is there something wrong with the video card? In my view, that there are more people with this problem.
    Toshiba offered little help?

    I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

    Hello

    Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

    But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
    If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

    I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

    PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

    One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

  • Black bars moving on the screen, flickering screen

    Hello everyone, I have buyed this summer than a laptop and I noticed several times some Black bars moving on the screen, I tried a few methods how to remove the battery, restarting the computer, etc... After the reboot, everything seems to be ok, what guys do you recommend me to do? I live in another country (Romania) and the laptop was buyed Austria - MediaMarkt, I can't get the laptop to the place where I buyed of... The laptop is a HP Pavilion 1352Eg G6, I expect answers, thanks in addvance, best regards.

    I would like to start by assuring the BIOS and video card drivers are updated here.

    Since it is temporarily resolved by restarting, it might be a software problem and driver updates help in general.
    Have you noticed if it seems to happen after using a certain program?

    You can try to connect the laptop to an external monitor. If the same behavior is on the external monitor, then it's a video card problem. If it only happens to the screen of the laptop, then it might be software or a hardware in the Control Panel, motherboard problem or somewhere in between.

  • Blue vertical line on the screen of the Qosmio G20

    A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
    A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

    If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

    Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
    I think that I bought 3 years ago. Need urgent help

    Hey Susana

    I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
    It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

    If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
    This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

    So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

    Good luck

  • Blue vertical line on the screen

    Hello

    After a day of use, I have a blue vertical line on the screen. Defective LCD screen? Tried to reapply the latest firmware, but that doesn't change anything. Other things to try before a sent an RMA?

    I dunno if Newegg "corresponds to" Amazon product replacement policy is defective products: Amazon will cover the shipping costs for the return (via a pre-paid return label he sends you) but also send a replacement free of charge.  You might want to check with Newegg, if your Clip has been purchased recently.

    Apart from Newegg, if you need to take advantage of the SanDisk warranty directly with her, SanDisk (at least in the United States) covers shipping as well as for the replacement that is sent back.

    http://www.SanDisk.com/about-SanDisk/contact-us?utm_source=contactus&utm_medium=hyperlink&utm_campai...

Maybe you are looking for