Satellite 1410 801 stops loading Windows - corrupt files

Similar Questions

• Installation of OS new satellite 1410 801

  I use Satellite 1410-801.

  My exec support advised me to format it and reinstall again.

  but I don't have the CD that came with the laptop start.

  can I format and reintall again

  concerning

  Vinod

  Hi vinod,

  Yes you can. You have two options. First is to contact the Service for the new restore CD original partner. If you want to do this, you just go to a Service partner and to sign a solemn statement (this is a Microsoft limitation) and then you will get a new recovery CD.

  Second solution is to install the operating system of Microsoft Windows XP Home CD (full version) edition. After that, you can install all the drivers CD tools & utilities. If you have no CD T & U there is another possibility. Download them all http://eu.computers.toshiba-europe.com

  Good bye

• Satellite 1410-801 and combo DVD SD-R2212

  Hello.

  I have a Satellite 1410 801 (with firmware combo DVD SD - R2212 1314).

  I can't read any CD or DVD. Seeing is always on a few seconds after inserting the disc. I tried to use a disc of starting BACK with driver BACK from Toshiba. Without success.
  According to the internet support site, there is no newer firmware for this material.

  5 months ago I had the same problem, then the drive has been changed.

  What can I do?

  Thank you and best regads.

  P. Perruchet.

  Hello

  That doesn't sound very well. You have more information about the change of the disk of 5 months ago?

  The technician spoke of failure?

  _____________________________________

  As a first step in my opinion, you can go to the Device Manager (could be found in the control panel - system) and check if there is a problem!

  If you had installed all the software that relates to the CD/DVD drive as programs that slows down the speed of your drive and uninstall it.

  Bye Bob

• Resource protection Windows corrupted files but unabel to rectify some of them was

  Hi everyone,

  I am a newbie for now.
  Just bare with me if this post shoulb be in another place.

  After running sfc/scannow on my vista ultimate result was: Windows resource protection found corrupt files but was unabel to correct some of them.
  Tell me what files are not fixed. It does not give me a solution, not that I can see.
  So I can't wait to find out how to fix them, and I count on your cooperation.

  I'd really appreciate your answers.

  Hey,.

  My problem is now solved thanks to those who helped me.

  I borrowed the CD from my friend and good took me some time, things are back to normal.

  I have another problem, but it will be another thread.

  Thanks again.

  Michael

• stop loading the flash file - leave it only in a certain range and then stops

  Hello

  have a problem with a flash page I design...

  I want the. SWF file to be opened but no donwloaded up to what a key is pressed but does not know ho to do...

  I'll be more specific:

  frame 1, I have an object (movieclip) which consists of a logo with a blur... effect after 1-2 seconds, the blur effect disappears, and you can see the logo. the logo itself is a button that will send the user to the next section on the main stage.

  on frame 2 of the main stage, I have a preloader that shows a progress bar and percentage of the page loaded... everything works fine

  the problem is that when you open the swf file, in that it begins to download the hole flash site and when you press on enter the site is already loaded and you don't see the progress of the preloader bar...

  I want only 1 framework the main stage to be loded, then I stop loading (download) the SWF file until you press ENTER.

  Enter when you press on I want the flash site to load and so you can see the preloader in action...

  can I put a code on the layer of action on the 1 setting that stops the loading of the movie (the first image is loaded and play the effect of blurring of the logo). and another code on the second image (where the preloader is visible) which includes the donwloading?

  Thank you much for the help!

  Hello

  you are right, you will find yourself with two swf files.
  I hope you're on Actionscript 3.0:

  ...
  
  enterButton_btn.addEventListener(MouseEvent.CLICK, loadMyApp)
  
  ....
  
  function loadMyApp(e:Event=null):void {
       var ldr:Loader = new Loader();
       ldr.contentLoader.addEventListener(Event.COMPLETE, onComplete);
       ldr.contentLoader.addEventListener(ErrorEvent.IO_ERROR, onError);
       ldr.contentLaoder.addEventListener(ProgressEvent.PROGRESS, onProgress)
       ldr.load(URLRequest('mysite.swf'));
  }
  
  function onProgress(e:ProgressEvent):void{
       trace(e.bytesTotal/e.bytesLoaded * 100 +'% loaded');
  }
  
  function onError(e:ErrorEvent):void{
       trace('Ooops something went wrong: '+e.text)
  }
  
  function onComplete(e:Event):void{
       addChild(e.currentTarget.content);
  }
  

  Take a look at adobe's reference http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/

  Kind regards

  Booya

• Satellite 1410-801: installation of a USB printer problem

  I am trying to install a new printer USB (dell 725) on my 1410-801. All the printer drivers are OK, but then, laptop and printer won't communicate with each other. Anyone know if the USB ports for this model to support this type of printer?

  Sorry I'm not a geek!

  Hi Buzz

  On this path, it is really not easy to give a precise answer. In my opinion you should try with the producer of the printer supports. They have more experience with the installation of own products.

• Toshiba Satellite Pro 4600; Cannot load Windows.

  A friend recently gave me a refurbished from this laptop model that has been updated with Windows XP Pro and it worked for about a month before a windows system file has been altered. I got a new OS disk and I replaced the file and it worked fine for another month, and when I started it today, it gave me a message saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "and gives me a list of options to reboot. I have not installed anything or nothing changed.

  I also tried each of the options and none work. I get a blue screen that flashes for a split second and then he returned to the screen with the restart options.

  I tried to go to the BIOS menu and setting up for her to start from the cd drive with the OS disk instead of try to reformat and I get a screen with a short message that says ' Media Test Failure. Check cable"and then returns to the screen with the with the restart options. I'm running out of ideas and anything online that I could find so far has helped. If anyone has any ideas at all, I'd like to hear them.

  I want to reformat completely this laptop if it is not too late.

  Any help would be appreciated. Thank you very much.

  Joy

  Hello

  Media Test failure. Check cable message appears because cell phone trying to boot from LAN.
  Maybe the laptop trying to boot from LAN because the HARD drive is no longer available it could be possible
  Have you checked the HARD drive in the BIOS? Please do!
  Check if the HARD disk is available in the BIOS
  If it s not appear not in the BIOS, then the disk HARD is dead and must be replaced.

  PS; You can also change the order start F12 press when the laptop starts upward. Then all the possible boot devices should appear on the screen and you can choose the CD/DVD drive as the boot source.

• Change the drive DVD on a Satellite 1410 801

  Hi all

  I want to change my dvd player for dvd writer 'toshiba SD-R6472U' on my toshiba 1410-801!

  I opened the laptop and the drive! right now the problem ;) beging

  I can see in the bios option "already changed" HARD and the DVD drive, but once past the toshiba screen seems to say "IDE 1 #error" error message. and the dvd player appears not in the "my computer" I tried to put a jumper to put the HARD drive in salve, master mode and cable select anyway even problem!

  Greetings to all and waiting for your help!

  Hello

  It seems that you bought the disc is not compatible!
  It is not recommended to connect any pin on the new drive code!
  I would like to invite your dealer where you bought the player and ask a new compatible.
  The fact is that if you destroy the drive, you lose the drive, warranty and money!

• Satellite 1410-801: Drive is not read and write many CDs

  Problem with Toshiba DVD - ROM SD-R2212 Drive on a Satellite S1410-801.
  Help, please!
  My drive doesn't read many CDs and I can't write any CD too?

  Hi Wade

  The fact is that readers cannot read all cd or dvd media.
  You should first check different media from different manufacturers.
  As far as I know, you should find a list with the media CD and DVD tested and supported in the user manual.
  I use the TDKs and I m very happy

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• Satellite A100-049 stops loading at the Windows loading screen

  Unless I opened fully open/almost completely the cover on my Toshiba Satellite A100-049 it will always freeze on screen Toshiba Logo black (first one you see). She has completed half of the blue progress bar that runs along the bottom of the screen. I need and then turn off the button and once again, it becomes work.

  The laptop is only 2 weeks old nine. It's especially annoying since it prevents a scheduled backup to wake the portable computer from Hibernation. I have to leave it on or leave the lid open permanently.

  Help?

  It seems that the title has been changed from the one I posted, nothing wrong with that, but it is no longer accurate. It keeps loading the Windows loading screen, it freezes "before" that date. The Toshiba Logo POST screen, very first, you see when you turn on the laptop.

• Satellite S1950-801: stop directly, no warning, no saving files

  I have some trouble whith my S1950-801

  When I work on my computer, it happens that my pc off directly, none no warning, no record of the files, no sign out the music.
  Just as a person push the bottom off (and hold)

  After closing, he always wants a DRIVE CONTROL, but he found nothing.

  Can someone help me please?

  Hello

  To me, this looks like a problem of overheating on your device.
  Computers laptop Toshiba supports an overheating protection. If the inside temperature increases until a critical threshold, the operating system stops the unit.
  Sales cooling fans for the most part are responsible for these issues.
  You can try to clean
  I found very useful topic on this procedure:
  Please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10417

• Satellite L750 slow to load windows

  Hi, I have a Toshiba Satellite L750/L755, and I had some problems starting windows after you use the tool/toshiba recovery disk

  So, this is what happened:

  I reached the maximum capacity on the C: drive, so I started data transfer to D: drive that was too slow, so I cancelled, it is when the computer froze and I had to stop it manually.

  I could not turn it back on so I used the "toshiba recovery" tool to make it back on, it worked; the problem is that the computer toke half forever to complete loading of windows, so I reused the "toshiba recovery tool" and ended the same. I also tried to run a repair of the registry, check the volume errors, nothing seems to work.

  I welcome any help

  Thank you

  Hello

  I understand this correctly? Notepad starts very slowly. Right?
  From my own experience, a lot of different process begins when the laptop starts.
  You can check the msconfig-> Startup tab

  In many cases, these are Toshiba processes that control the characteristics of different laptops and multimedia keys, FN keys, energy ECO-mode, etc.
  Also antivirus software slowing down the boot process.
  What antivirus software do you use?

  I use the avast! and the Avira antivir software. Both can be downloaded for free.
  I have remove the Symantec Norton Antivirus software preinstalled, because it needs a lot of resources and slow down my laptop extremely.

• Satellite A60: Startup problem (missing or corrupted file)

  Ive got the laptop above and its working well since purchased in December. The other day I was installing a program it crashed and now when I try to start it it continues to come up with an error message saying "file missing or corrupt. system32\driver\ntfs.sys' and to solve this problem using the original windows xp disc.

  Windows was already installed on the laptop and I have no such disc, ive run the disk recovery, but that has not solved the problem. Ive even tried to create a boot disk using nero burner, but you need a windows xp disc to do.

  Y at - it round anywere without sending on fixed or go out and buy windows xp?

  Hello

  Try to do a low-level disk format before starting the recovery CD.

  Kind regards

  Nick

• Satellite A105 freezes after loaded Windows xp

  I have a Satellite A105 - S4074.
  The operating system loads then freezes.

  I tried safe mode and ran the error checking and defragmentation. I tried the config sys and when the system is loaded, then freezes.
  I have the week last to system load and have an internet connection. But it froze again the next day.

  I can't get a consistent performance. I have windows xp media center. I've recently upgraded ram to 4 GB.
  What are my options? I lost the original restore disks.

  I'm ready to reformat the hard drive if necessary.

  > I recently upgraded ram to 4 GB.
  Have you checked if the laptop would freeze using the old RAM modules?
  If this isn't the case, then you should check this!

  In many cases of bad, no compatible or defective modules could cause these issues