Satellite 1410-801: installation of a USB printer problem

Similar Questions

• Installation of OS new satellite 1410 801

  I use Satellite 1410-801.

  My exec support advised me to format it and reinstall again.

  but I don't have the CD that came with the laptop start.

  can I format and reintall again

  concerning

  Vinod

  Hi vinod,

  Yes you can. You have two options. First is to contact the Service for the new restore CD original partner. If you want to do this, you just go to a Service partner and to sign a solemn statement (this is a Microsoft limitation) and then you will get a new recovery CD.

  Second solution is to install the operating system of Microsoft Windows XP Home CD (full version) edition. After that, you can install all the drivers CD tools & utilities. If you have no CD T & U there is another possibility. Download them all http://eu.computers.toshiba-europe.com

  Good bye

• Satellite 1410-801 and combo DVD SD-R2212

  Hello.

  I have a Satellite 1410 801 (with firmware combo DVD SD - R2212 1314).

  I can't read any CD or DVD. Seeing is always on a few seconds after inserting the disc. I tried to use a disc of starting BACK with driver BACK from Toshiba. Without success.
  According to the internet support site, there is no newer firmware for this material.

  5 months ago I had the same problem, then the drive has been changed.

  What can I do?

  Thank you and best regads.

  P. Perruchet.

  Hello

  That doesn't sound very well. You have more information about the change of the disk of 5 months ago?

  The technician spoke of failure?

  _____________________________________

  As a first step in my opinion, you can go to the Device Manager (could be found in the control panel - system) and check if there is a problem!

  If you had installed all the software that relates to the CD/DVD drive as programs that slows down the speed of your drive and uninstall it.

  Bye Bob

• Change the drive DVD on a Satellite 1410 801

  Hi all

  I want to change my dvd player for dvd writer 'toshiba SD-R6472U' on my toshiba 1410-801!

  I opened the laptop and the drive! right now the problem ;) beging

  I can see in the bios option "already changed" HARD and the DVD drive, but once past the toshiba screen seems to say "IDE 1 #error" error message. and the dvd player appears not in the "my computer" I tried to put a jumper to put the HARD drive in salve, master mode and cable select anyway even problem!

  Greetings to all and waiting for your help!

  Hello

  It seems that you bought the disc is not compatible!
  It is not recommended to connect any pin on the new drive code!
  I would like to invite your dealer where you bought the player and ask a new compatible.
  The fact is that if you destroy the drive, you lose the drive, warranty and money!

• Satellite 1410-801: Drive is not read and write many CDs

  Problem with Toshiba DVD - ROM SD-R2212 Drive on a Satellite S1410-801.
  Help, please!
  My drive doesn't read many CDs and I can't write any CD too?

  Hi Wade

  The fact is that readers cannot read all cd or dvd media.
  You should first check different media from different manufacturers.
  As far as I know, you should find a list with the media CD and DVD tested and supported in the user manual.
  I use the TDKs and I m very happy

• Dedicated assignment pool USB printer problem

  If it's in the wrong place, I apologize and place stated to happen.

  We have:

  View 4.6.2 build-916912

  vSphere/vCenter 4.1.0 - 799345

  A pool of dedicated server with a single machine (SP1 Win7), single-user assignment. We strive to get a local USB printer to receive the VDI machine printing jobs. The printer is an HP 2300 series. The printer is installed on the local computer. The first document prints well, the second document will be a blue screen the VDI (Capture.jpg) machine.

  Any thoughts?

  If additional information is necessary, I'll give you a pleasure them.

  I always think that driver first, but if you want more detailed information on this topic, you can search the stop on the Microsoft site code and see what it says.

• Satellite 1410 801 stops loading Windows - corrupt files

  For several months I have problems at the start of my laptop: it will restart several times, stop to perform the will of loading windows; Sometimes I get start of message (registry) files are corrupted etc. In most cases, it will start after several tests correctly. I already reinstalled (clean disk) made several memory and disc of the controls without any error message. What can be the reason for this problem?

  I intend to replace the memory card or HARD drive BUT if this should solve the problem. Can someone give some advice or tips?

  Hello

  On this path, it is not easy to give a correct diagnosis. If the problem persists after the installation of clean operating system, in my opinion, you should check HARD drive first (upgrades and hope that other hardware components are original without).

  Try to get another HARD drive, Exchange and install the OS by using recovery media. In my opinion, it should be the first step.

• HP Envy 5532 - Win 7 64 - bit - USB printing problem

  Hi all

  I recently bought a HP Envy 5532 all-in-one, which is located to the sides of

  my HP Compaq 6000 running Windows 7 Pro 64 bit.

  I tried a few HP diagnostic programs, which recognize,

  but do not solve the problem and suggest uninstall and start again.

  I also installed the latest driver download, rather than the installation disc.

  I also tried the Fixit Windows for the USB, nothing helps.

  My problem is, no matter how to install software/drivers to support this

  device, I can't print via USB.

  Once installed, I print a test page for 'printer properties', I can see the coil of the page

  in the active jobs window, then disappear and... nothing.

  There seems to be a link broken between the printer and USB001 which is the virtual USB port

  Everyone knows and if so, please share how you solved.

  as it is driving me crazy.

  Thanks in advance

  After doing a bit more research, it is certainly a problem of Windows security permissions.

  I have a workaround by following this link and can now print. :-), but do not know the security implications.

  Not sure that the installer sets incorrect permissions during installation,

  Certainly, I ran the installer as an administrator and still had the problem.

  Maybe you could advise on the required parameters?

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/56f102d6-E53A-42a9-9855-1e01efeb4cd2/Printer-Spooler-access-denied-on-local-printers?Forum=winserveressentials

  Hope this helps to determine what the problem

  concerning

  Terry

• Satellite L450-136 - installation of web cam driver problem

  Hi all

  I am trying to download web cam driver for Satellite L450-136.
  All is well until final bit, I get off cam end of message.
  Do not know how.

  Thank you

  Hello

  I'm not quite sure that what is happening with the webcam, but more often the webcam can be started using the software of the webcam installed m.

  In msconfig-> Startup tab, you can disable the webcam software to prevent automatic loading, while the laptop starts the software.

  Then you could start again the software and the webcam.
  You will see the little icon in the taskbar (lower right corner).
  Click on-> see the toolbar
  Then a webcam toolbar should appear where you could choose webcam only option.

  PS: If something went wrong with the installation of the webcam software, then uninstall the software and try again

• Installation of the USB Modem problem

  I am trying to install a Telstra 4 G mobile USB modem on a Dell Ultrabook on Windows 7, keep this message ' VB Script run time for custom action ' won't complete installation

  Update your Windows and install the latest update.

  Visit the website of support if your modem and install the latest version of the driver.

  Contact the manufacturer support and discuss this matter with them.

• USB printer problems

  Hi all

  I've been scratching my head for a few days now with my customers zero and usb printers. I have several clones of Windows 7 connection through zero Clients and a HP P1006 printer. The question is, would print the printer, but then it seems to lose its connection, because jobs would be stuck in the queue. I have to play with to restart the printer and stop and start the service of spool printing, just to make it work.

  I noticed that we were initially using the driver of a host for the P1006. I went in the parent company, removed this printer, then added the driver included with the HP CD. Since then, users have not had the issue.

  My question is, should not use us drivers based on the host to see? I have other HP printers and for Windows 7, the only choice of HP is host-based drivers, so I'm hesitant on adding them

  Any information would be helpful

  Not sure it's important.  'Host' in your case, it is just the virtual machine so if it works better, use them.  Ideally the non-hotes would save you processor cycles, but I wouldn't be too concerned, printers can be a PITA, so if you have a driver that works, I wouldn't hesitate to use it.

  Gunnar

• Is Satellite 1410 401 supports USB 2.0?

  I cann't find anywhere whether Satellite 1410-401 compatible USB 2.0. If this isn't the case - what would be the recommendations in order to add USB 2.0 support for my laptop?

  Thank you in advance.

  Andrianas

  Hello

  Sorry, I have to disappoint you. Satellite 1410-401 has only 3 USB 1.1 ports!

  You can add USB 2.0 with external solutions like PCMCIA USB 2.0 card.

  Sammy Bye

• Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

  Hi there again!

  Now with a new and strange issue.

  We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

  Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

  Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

  A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

  I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

  I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

  At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

  "This Bios update adds functionality to your system.
  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)

  For more detailed updated information, please refer to Information update BIOS Toshiba"

  (you can find it here):

  [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

  Archives
  Satellite
  Satellite 14xx
  Satellite 1410 604
  PS141E

  Quite specific. Isn't?)

  According to the information in this Web site, the available BIOS fits the following models:

  "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

  Yes... it's here!

  Now when you go into the "Toshiba BIOS update information", you get:

  "Ref. FAQ: TRO0000000b07.

  A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

  Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

  Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

  "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

  This should trigger yellow alarms in our minds.

  + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

  And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

  So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

  As reported by the update program, the system would restart. And in fact he did.

  Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

  {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

  OMG! I never movement something SO bad. 3-1-1!

  And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

  He never came again to life. He's still 3-1-1 beep.

  But now comes the investigation on the human factors involved in this accident.

  I found I committed the following errors:

  * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

  * (2) * I cross checked deep enough (until it was already too late).

  * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

  * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

  * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

  Then I began the most interesting part of the investigation.

  {color: #0000ff} * "what went wrong?" * {color}

  Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

  First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

  And I found something... VERY interesting:

  Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
  These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

  GOOD! Or not?

  Let's take a look:

  First thing I did was download all four files.

  Then I took the same version that made the accident: 1.40

  I unzipped the file, which I found:

  2009-06-05 00:17 < DIR >.
  2009-06-05 00:17 < DIR >...
  31/01/2003 08:38 11410v14.iso 1 605 632
  31/01/2003 08:38 511 764 14 1370. EXE
  {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
  01/09/2003 09:32 250 663 biofca9t.com
  10/08/2002 05:26 30 697 chgbiosa.exe
  31/01/2003 08:36 1 087 instinfo.bat
  2002-05-13 15:25 378 175 launcher.exe
  31/01/2003 08:36 433 launcher.ini
  2009-06-05 00:17 0 list.txt
  31/01/2003 08:36 14 768 readme.com
  * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
  11 archivos 3 530 212 bytes
  3 dirs 9,404,600,320 bytes free

  And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

  So I went the readme.txt and I found this:

  'README. CDC TXT 31/01/2003
  Flash BIOS version 1.40 for Satellite 1410
  -----
  This BIOS is applicable for the following models:

  Satellite 1410-S105
  Satellite 1410-S106
  Satellite 1410-S173
  Satellite 1410-S174
  Satellite 1410-S175
  Satellite 1410-S176
  Satellite 1415-S105
  Satellite 1415-S106
  Satellite 1415-S115
  Satellite 1415-S173
  Satellite 1415-S174
  Satellite 1415-S175
  Satellite 1415-S176
  Satellite 2410-S203
  Satellite 2410-S204.

  Please note that the model 1410-604 is * NOT * listed.

  I thought ' well, there must be another archive... ". »

  But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

  {color: #0000ff} * 2410A9V140. EXE * {color}

  So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

  * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

  So I once again, uncompressed to find:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\2410A9v140

  2009-06-05 00:43 < DIR >.
  2009-06-05 00:43 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,793,984 bytes free

  No readme file...

  Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

  This:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

  2009-06-05 00:46 < DIR >.
  2009-06-05 00:46 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,781,696 bytes free

  * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

  And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

  (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

  The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

  In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

  Thanks for reading so far.

  Now, what I need is to get ideas on a work around for this, my ideas are:

  (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

  (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

  (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

  (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

  Wwwaaaaoooowww... what a falks long post! Sorry about that!

  Forgive me, but I wanted to be really clear.

  Someone give some tips or advice will be greatly appreciated.

  Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

  Thank you once again, in advance, and sorry again.

  FenixDigital

  Post edited by: Fenix_D
  Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

  Hi Fenix,

  Wow... He tooked a lot of time to read your post...

  Maybe I can help you.

  The Bios in the website is the right one. If you have downloaded the right version of the Bios.

  Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
  This should be the reason, why does not the readme file contain the European model.

  I'll try to do an update of the fresh Bios using the update of the traditional Bios.

  Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
  After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

  If your laptop does not power perhaps the most, the RAM is default?

  Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

  I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

  The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

  Best regards

  Maurice

• USB printer not detected on satellite series?

  Hello

  Have a laptop Toshiba Equium and today I bought a printer from a different manufacture.
  USB cable is not supplied with the printer (not good things) and so had to buy a.

  Laptop does not accept the USB cable saying something like USB isn't signwritten with the laptop?
  I have no idea what has happened?

  I'm sure that the printer is 100% and the USB's all nine... the majority of the facility took place until this problem is with the USB
  The laptop never had a printer connected before in 18 months of ownership.

  Any help!

  Thank you

  Hello

  First of all, you must make sure that you bought a straight cable and which is compatible with the laptop.
  My sister uses a USB printer and the cable that she bought looks like this;

  [USB 2.0 printer cable | http://images.tigerdirect.com/skuimages/large/C184-4000_U_6-main.jpg]

  But the note man; You should check this printer installation instructions.
  Sometimes the driver (shipped with the printer) must be installed before you connect the printer to the computer!

  What you could do to first remove the USB ports, controllers from Device Manager and reboot the laptop.
  After restarting again the USB ports must be installed again.

  After this short stage, you continue with the installation of the printer described in the manual!

  Good bye

• Satellite 5200-801-indicator of battery flashes orange while dc is green

  I have SATELLITE 5200-801, the battery light flashes orange while the domain controller is green and the laptop works
  stop when it is off.
  the battery is empty.

  I can't boot from external USB cdrom to install windows as its internal DVD does not work

  Help, please

  > Ok I fix the battery problem was feeding me to change.
  Nice to hear that! :)

  > But I still can't start external USB cdrom
  Have you checked if your laptop computer (BIOS) supports booting from an external USB drive? I doubt it would be possible on old Satellite 5200. If you exchange your CD-ROM drive. You can look on eBay for the part of second hand, they are a little cheaper. :)