Satellite A300-1LT - I have to manual activate HDMI sound

Similar Questions

• Satellite A300 - 1LT PSAGCE - Cant get higher resolution at 1280 x 800 on external monitor

  I have toshiba Satellite A300 - 1LT PSAGCE and I plugged the monitor additional profeccional LP3065, but I can't get the 1280 x 800 resolution and it works on HDMI, via the VGA output, I get only a black screen.

  Any suggestions?

  It is always an issue with external screens. Most of them have very high native resolution, and because GPU performance limited to external displays, there is often a problem.

  Unfortunately, I was not able to find what is the max resolution for external displays, but your LP3065 has 2.560 x 1.600 as max resolution, right?

  Can you please tell us what OS you are using? The Toshiba support page display driver you are using.

• Satellite A300-1LT-cannot install the WLAN driver

  I have the Satellite A300-1LT with Windows XP x 64 on my system.
  Most of the drivers works fine, but I can't get the wireless to work.
  I tried all the drivers (intel, realtek, atheros) and nothing seams to work?

  Help, please!

  Hello

  The laptop supports the Intel (Intel WiFi Link 5100AGN) WLan card then you need to install the Intel WLan card driver.

  Using Windows XP 64 bit OS?

  Please check this page of Portal Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here you can find a driver:
  Intel PRO/Wireless 3945/4965/5100/5300 XP 64 / 2000 11.1.1.16

  It should work!

• Satellite A300-1LT - cannot write to SD card

  I had Satellite A300 1lt 5 months, everything works great. Until the day I could not write data to my microSD card. I use this card in my Samsung cell phone. I put it in an adapter SD, because of course its too small for Toshiba card slot. I see all the files on the card, but when I try to write it is said:
  "The disk is write protected. Remove protection or use another disk.
  I don't remember putting protection on my card. I also tried a different SD card, the result was the same. However, when I use XD cards, its fully capable access.

  Any ideas?
  I am running Vista SP2.
  When I put the card in my laptop, I can read/write normally.

  Hello

  Normally, when you look at the map at the top of the left side can be a write protection notch. If it is present, the card cannot be written to.
  Check this box!

  In addition, it would be interesting to know what SD card you use exactly because not all types are supported. I checked the user manual and the following cards will be supported:
  (Up to 2GB) SD card
  SDHC card (up to 16 GB)

  If you are using a microphone or min SD card it can be not supported!

• Satellite A300-1LT - Webcam driver for Windows 7

  Hello

  I have a problem with my the right webcam driver after installing Windows 7 on my Satellite A300-1LT, I got win XP before and it works great. In downloads is available just for xp, vista 32-bit and 64-bit driver (I tried with the same results). Webcam app windows startup and gives me a msg of error that I have to reinstall or install new drivers of webcam. Webcam works for example. buth Skype with (very) poor quality.

  I tried to find wich cam comes (chicony?) also but nothing.

  Does Enyone else has experienced this problem and how to resolve? Help, please...

  Hi glava11,

  As far as I know that you can also use the Satellite A500 webcam driver because it s equipped of webcam Chicony too.

  So take a look for A500 downloads. There, you can find Windows 7 driver for webcam that should work on your model too.

  Check this box!

• Satellite A300-1LT won't boot up - white screen & no HARD disk activity

  I had a problem, the touch pad does not work.
  I found on the internet solution to stop computer, take out the battery, wait a bit and try again.
  That's when my problems start.

  When I put the battery back on, I turned on the laptop.
  White screen (nothing happens), led indicators are on (except for the hard disk), cd drive tries to read but nothing happens and the fan is running.
  I tried everything I could find (wait 30 minutes, take out, start without battery battery, etc.) but no luck.

  My lap top is Satellite A300-1lt, and I got 2 months.
  I don't want to take it to the service, unless it is really necessary, because I really need now, I can't wait for weeks until what he returned.

  Please can someone help me out, Im desperate...

  Thanks in advantage...

  Connect your laptop (with battery) to the power supply and leave an hour, try to restart your laptop. If portable starting again let it run until the battery will be fully recharged.

  I hope that it will work properly again. I had a similar problem with my Satellite A300-1LI, and I do this. Laptop now works perfectly with or without adapter.

• Re: Satellite A300-1LT - after display driver update, I get an error message

  Hi all,

  I have A300-1LT PSAGCE and a update my toshiba Download Center display driver.

  ATI
  Type display driver
  Mobility Radeon HD 46xx/45xx/43xx subtype
  Size (KB) 108950
  Version 8.611
  Model Satellite L550, Satellite L500, Satellite A300, Satellite Pro A300
  Operating system Windows Vista 32-Bit

  When I reboot laptop computer error showed:

  "The Catalyst Control Center is not supported by the version of the driver for your graphics to enable. If you please update your ATI graphics driver or enable your ATI card using the display manager. »

  Cannot find Manager displayer have only man of color. What should I do?

  Help, please!

  Thnx

  Hello!

  Well, for me it looks like you didn't uninstall the old display driver software. Before installing a newer version, you still need to delete the old version. So go in Control Panel > software. Select ATI display driver software and remove it. After restarting the laptop, you must clean the Windows system using CCleaner (Google is your friend to find it). Restart again and after that, you can install the latest version of page of Toshiba.

  I hope this works.
  Moreover, what graphics card do you have?

  Good bye

• Satellite A300-1MC - I have bad discs?

  I recently bought the upgrade to Windows 7, which has just arrived.

  I know that there are some things that I use which will be like everything does not work with Windows 7 so I did a dual boot, two reasons one is if I can still use the Vista operating system and the other so I can get used to Windows 7 and its different ways before going over to him completely.

  The problem I have is that if the disc of Windows 7 seems to have loaded OK Toshiba upgrade disc with all the system files like DVD, mouse, touch programmable keys key etc. does not load as she asked my model type and the number, but they are not in the list that appears.
  I have a Satellite A300-1MC.

  Only, I bought the upgrade when I went on the site of Toshiba and informed the option to update the page. I also tried my laptop more old, but who told me that it was not covered by the offer so the disk that I should work with the laptop more recent (A300).
  Have I been sent the disc wrong or is there something I need to do to get it to load?

  I really want to keep the dual boot, but if there is no way to make Windows 7 work then I have my money on another asted product from Ms.

  Hey Buddy,

  I'm a little confused about your Mr. ad if I understand you correctly Yes your problem is just that you can t find your model (A300-1MC) on the upgrade disc.
  Is this correct?

  If yes I can only say from my own experience that you should look for the model number. AFAIK A300-1MC belongs to the series of PSAG8E and you will get this model.
  Check this box!

  I hope I could help a bit and if you have any other questions, please let us know! :)

• Satellite A300 - 1LT T5800 - failure HDD needs to be replaced for

  Hi all

  The hard drive on my Toshiba A300-1LT failed, I need to replace it and I can't find any technique of the broken disk.
  Are there readers recommended for the A300-1LT.
  May I appreciateif you could help me.

  Thank you

  The warranty is still valid?
  Please do not invest your money if the warranty is valid. Contact nearest authorized maker Toshiba and let check the HARD drive.
  With valid warranty the HD should be replaced free of charge.

• Satellite A300 - can use only stereo receiver via HDMI

  I was wondering if someone could help me with my audio problems. I have a PSAGCC Satellite A300 - 06 h 019 current running Vista home premium 64 bit SO1, and I can't hang with my receiver. I have attached my computer to the receiver via the HDMI port, and only 2 channels (stereo) is available to be selected.

  I have the latest Realtek drivers, the radeon ATI drivers newer, but I can't select the surround speakers in the audio, stereo settings only. Is there some sort of registry patch or update or something that will allow me to select more than 2 channels of output through my HDMI? I have a very nice surround sound Setup and I want to maximize my value of entertainment.

  Also, when I go into the HDMI audio settings, there is a box to check, dolby digital and dts, when I test the dts and dolby digital, he spends in surround sound and plays test tones, but I can't get 5.1 or 7.1 speakers for watching movies.

  Thank you in advance if anyone can help me with this.

  Hello

  As far as I know, you can change the sound of digital output.
  In many cases, this option is not visible in sound options.

  To do this, go to control panel of-> sound-> the Read tab
  Here, you will need to right click and should mark the options see the disabled devices and show disconnected devices.
  Now you should see the option called Digitalaudio (HDMI) and this should be retained.

  But I m not very good if you get more options like stereo only

• Satellite A300-1lT - I want to restore Vista with recovery option

  Hello world

  With my Toshiba nothing but problems. First of all, I waited replacement screen for months cause it wasn t all at the warehouse. K, after that I went down to XP but pilot are buggy, sound is poor, cannot get USB 2.0 to work, the system is slower that Vista so I decided to go back to Vista.

  But of course, there is no DVD so I need to restore via the restoration of HARD drive folder that I have. But cool, Toshiba doesn't let me to download the utility to create a backup DVD. So what can I do? I have HDD Recovery folder, how now create DVDs without utility that first of all they gave me.

  PS.
  You can say s not Toshiba fault; you did that blah blah. Of course, but first I waited replacement screen, I have original Vista DVD by wasn t given, I can't even download Toshiba utility. What sad piece of equipment. I have the experience, my first OS installed was BACK and Win95, many OS installation, after that, but I install back my OS in 2009 would not be hoping that its going to happen.

  All the ideas you good ppl

  Sorry mate, but in this case you need a new recovery disk. The HDD Recovery folder is not useful to you because you do not have Windows Vista and as you already know that the Toshiba recovery disc creator cannot be downloaded.

  You must order a new disc of a Toshiba authorized service provider directly:
  [https://backupmedia.toshiba.eu/landing.aspx]

  To be honest, this is not a problem of Toshiba. If you start the laptop for the first time, you get the following message and should not be ignored:

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Re: Satellite A300-1LT built in mic won't work

  There is a problem with the microphone.
  It does not even if everything seems fine.

  I have the drivers updated, I put it in the Panel as default, is said here is work, when I plug another microphone (external), we're working, but this one isn't.
  It is not cut, I checked everything I could think of.
  Also read a lot of forums but no solution.

  Does anyone know how to fix this?

  I tried to make it work with Skype, msn messenger, windows sound recored and software assistant camera but no luck.

  Hello

  The internal mic belongs to the internal webcam.
  Have you checked the settings in the webcam software?

  In the webcam-> Audio tab settings, you will see a bar of audio volume.
  This must be set to max!

• Satellite A300 - 1 MW (PSAGCE) - how to activate the multimedia key lighting?

  How and what software I have to install to allow multimedia keys, portable lighting on/off control function [backlight, laptop computer]?

  Thank you.

  I'm from Poland, if my English is not good ;-))

  Hello

  You will need the Toshiba value added package, but normally it is preinstalled on your laptop.
  You use the factory settings or you have installed your own version of Windows?

  The PPV, you can download it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Re: Satellite A300-1LT - impossible to install the ATI catalyst control center

  I can't install sound pretty boring - ATI catalyst control center. To be honest, everything works fine without it, but in a few days, I'll get HDTV, so I thought why not install now to check the options in it. I installed the latest versions of ATI drivers, choose the right system (vista 32 bit), but for some strange reason, I do not see anywhere, not in the start Panel, not in c-program files-ati tehnologices where its supposed to be installed.

  As I sad, I have no problem with my grapfic card, I just wanted to be able to play with the scope setting resolutions when my TV is used.

  I have the ati 3470 graphic card.

  Hi Hrvoje

  If I understand you right, you use now non - Toshiba ATI display driver. Am I right about that?
  I mean I don't think that Toshiba offers several versions of ATI drivers for your model laptop.

  Where you Born these drivers? On the Toshiba download page?

• Satellite A300-1LT - support WiFi Draft N?

  care to say

  Wireless technology: Bluetooth®
  Compliance: Wi - Fi
  Network support: 802.11a/g/Draft-N
  Wireless technology: LAN (802.11a/g/Draft-N) wireless

  It is 'real' standard n or something inbetween or is it just a / g?

  Hi hrvoje_xyz,

  According to the specs on the Toshiba site, it supports Draft N Wireless!

  I put t know what you mean by something between a / g but he supported of the real project N. :)