Firefox 3.6.6 install corrupted Vista?

Similar Questions

• Install new Vista, corrupt registry, 0 x 0000225

  This is the first time I tried to install Vista on this desktop computer, but I am also having bad to do a XP Pro install also.  The reason for the installation was that I could not start Windows at all after the power went out while the PC is in sleep mode.  When thiat, he was running XP Pro and then I decided that I would be upgrading to Vista

  I use a motherboard ASUS A8N32-SLI Deluxe with an AMD x 64 processor, 2 GB RAM, NVIDIA 7600 GT graphics card.

  I can boot Windows CD installed fine, but once that he only the initial reboot after installing Windows, I get an error that the registry is corrupted and it gives me the code 0 x 0000225.

  Here is what I did to solve it.

  • A run KillDisk and tried to reinstall, no change
  • Extended ran diagnostics disk HARD and RAM, no error found
  • Use the console to repair Windows XP and ran fixmbr and fixboot
  • Tried to reinstall XP Pro, gives BSOD on XP loading screen

  Hi Wafflechunk,

  1. do you format the hard drive before doing the clean install of Vista?

  If no important data on the hard drive, then I would say allows you to perform a clean install by formatting cells.

  Reference:

  Installation and reinstallation of Windows Vista (to install Windows by performing a clean installation)

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_2

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Firefox guard wanting to install ver.17, I left it and it crashes on 'Check now to add on cooperation', this may take a few minutes", there is a one-hour, not MB

  Ugh... firefox was wanting to install 17.01 or 17.04, can't remember what number she bothers me and bother me until I said okay, I'll update my version. so I let him, you need to restart my computer, so he said just a minute firefox checks your addons for comparison, or whether the 'f' he says, then turns on a box and a horizontal line scrolling back and forth as his work and the bottom says, this may take a few minutes. Well, I wait and wait and wait and wait and wait and wait and... nothing. I can't cancel, I can't x out of the box... I let it for more and time and it does nothing... so I have to use internet ex. I have redownloaded firefox from there to try it from scratch and same thing, if I cancel the box immediately stops then nothing I can rehit the firefox button and it will load firefox. but never fear... another box comes up later and says you need the latest version of firefox... man if the system on your end doesn't, can't you guys see this? I am disappointed that you have exhausted there is too long too. and ads and the slow and privacy is becoming more of a question

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

  If that didn't help then also try to delete the file addons.sqlite.

• HP a367c XP family, upgrade to clean install of Vista. Firmware upgrade must be done again

  I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption

  1. can I need to reinstall the firmware for a367c office updates, or others like bios, other ect.

  2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours.

  Thank you

  plantingrichard

  plantingrichard wrote: I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption 1. I need to reinstall updates firmware for a367c office, or others such as bios, other ect. 2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours. Thank you plantingrichard

  Hello plantingrichard, first of all, it would be useless to worry about Firmware updates, because data for these Firmware updates are stored in the devices that the firmware has been installed for.

  You may be able to restore the system with the feature of restoration of HP Recovery from the hard drive to the system startup and the F - 11 key when the HP Logo screen. Just as it was when shipped, it would put all HP applications on the system.

  You can then use the Vista DVD disk and perform an inplace of Windows Vista SP1 upgrade.

  If you don't want all HP applications, you can perform a new installation of Vista.

  You may be able to locate the Vista SP2, but I suggest the Windows Update site and download and install all updates including Vista SP2.

  If you have a DVD of Vista SP2, you can use it to upgrade or new installation. The Vista SP2 would have included in the DVD of Vista SP2 SP1 updates.

  As you suggest, it will take some time to complete, but you'd probably have a more stable system using this approach.

• Cannot install Windows vista service pack 2

  OT: used to install service pack 2 for vista
  : TRY TO INSTALL IT SAYS CANNOT INSTALL THEN RETURNS TO ORGINALL PARAMETERS CAN SOMEONE HELP

  Hi Sime JX,

  1. What is the accurate and complete error message you get?
  2. you try to download and install Windows vista Service pack 2 or install through Windows updates?

  Method 1
  I suggest you perform the clean boot and then install Windows 7 service pack 2.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest to turn off all antivirus and firewall on the computer and then try the steps from the following link:

  Disable the antivirus
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Method 3
  I suggest you make the SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need of v of firefox to DL and install on Windows 7 without internet via jumpdrive.

  NEEED a fairly complete Setup file for Firefox that I can install on the Win 7 system that has seriously broken IEv11... Error problem proxy server that refuses to trouble - making it unusable for downloading Firefox.

  This page is 'full' latest installers of Firefox (that is, not the installer to "stub"):

  https://www.Mozilla.org/Firefox/all/ (scroll your preferred language)

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777

• Desktop HP Pavilion p6310y: need standalone Serial ATA Drivers to install Windows Vista on Pavilion p6310y

  I bought your desktop Pavilion p6310y on eBay, and I really like it. I installed Windows 7 Ultimate on it without problem. For the purposes of running the software (in particular, Microsoft Virtual PC 2007), I also want to install Windows Vista Ultimate on it, on another partition.

  I was under the impression that Windows Vista Home Premium 64 - Bit was originally installed the operating system when this system was released, however, when I start the installation support Windows Vista (which I created from a downloaded ISO), it requires additional drivers (no doubt, Serial ATA drivers) before instalatio, also no hard drives appear in the drive list. Anyone know where I can get these independent Serial ATA driver files? The controller is a NVIDIA nForce Serial ATA controller. I do not have the recovery of original installation disks and don't think that it would be possible to get to this point, this system is no longer supported by HP.

  Any help would be appreciated. TIA.

  Mark W. Stroberg

  Hi, Mark:

  I compressed upwards and tied the driver for the sata raid controller, you require to the nvidia chipset, that your PC has below.

  The best way to install the driver is as follows...

  Extract (copy) the files on a USB FlashDrive without any folder.

  With the flash player and the support of Vista installation in the machine, boot from the Vista installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that Vista will install.

• How to transfer bookmarks on my computer from firefox 3.6.10, Firefox 4 (not yet installed) on the same computer?

  How to transfer from my computer, Firefox 3.6.1 to firefox 4 (not yet installed) on the same computer, without anything losing favorite bookmarks?

  If you want to make sure you have your bookmarks in FF4. You can always back up your bookmarks on your PC and import it in FF4 later:

  Bookmarks > organize bookmarks > export to HTML

  then save it anywhere in your PC.

• Is it possible to import existing bookmarks in Firefox from another browser installed on my computer

  Is it possible to import existing bookmarks directly in Firefox from another browser installed on my computer? I am currently using Google Chrome and have amassed a lot of bookmarks, currently divided into a number of different subfolders. A simple method to transfer these massively would save a lot of time!

  This link shows how to import Google chrome - https://support.mozilla.com/kb/Importing+bookmarks+from+Google+Chrome

• Firefox Mobile is not installed on my Motorola Dext.

  Firefox Mobile is not installed on my Motorola Dext, I download the ARMv6 that can run on my mobile but not. What can I do?

  Android 1.5 is good that even though, as it can be stable a smooth, but he can't support newer applications like the current mobile Firefox.

  In fact if you are in the United States, then you might get an update to 2.1

  November 9, 2010, the upgrade was finally released to the American public. The European and Latin American phone (DEXT) versions will not receive the update.

  The chip it uses is the Qualcomm MSM7201A which is part of the ARM11 ARMv6 family. So if you do not update Android 2.1 installed, then builds ARMv6 can run.

  https://wiki.Mozilla.org/mobile/platforms/Android#ARMv6_.28experimental.29

• Can I install Windows Vista on my A110-178

  People,

  I am in possession of a laptop Toshiba Satellite A110-178. I would like to know if I can install Windows Vista on this laptop? And what version, Home Basic, home premium, ultimate or business.

  Kind regards

  Tim Snijckers

  Hello Tim

  I checked the Toshiba download page, and it seems that the drivers for Vista are available. Your laptop should have mode number PSAB0. Please visit http://support.toshiba-tro.de > support & download and choose your model of laptop.

  Before you start the installation of Vista, it is recommended to update BIOS first. I did the same thing for friends Satellite A100. After the BIOS update, I was able to install Vista and all the stuff from Toshiba with no problems.