Satellite 2415 S205 recovery disks don't work

Similar Questions

• Pavilion a1230n w XP: Replace hard disk & recovery disks don't work

  Replace hard disk & recovery disks do not work. Create the new partition & Microsft Recovery Console ONLY the options available on the disk recovery TOOLS. Recovery of Microsoft stops at the page "Preparing the system to install Windows XP".  Pressing enter at this stage of the results in "cannot find EULA" message & turns off the computer... already old version of XP (media center) via another set of discs, but want software HP original back!

  If it starts from the cd Recovery Tools but not the recovery DVDs, then you can have a bad set. Of course, it could be laser dvd in your CD/DVD drive too. The dvd function works before reinstallation?

  Don't see them not listed in HP longer, but are available HERE for $27

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• NB305-01E recovery disks don't work

  I tried to restore my NB305 Netbook (windows 7) to its original factory (using the beginning and hold '0') and with the recovery disc I made when I bought my netbook.

  No recovery option works. Using the beginning + '0' does not put me in the hard drive recovery mode (everything that happens is that it freezes the boot process until I release the "0" key), or try using the recovery (F12 + recovery disk process) disk bothers me in the process of recovery, but after all of 1/2 hour of good process , the computer and external disk drive crashes with a message "copy files to the disc.

  I left the computer all night and there was no progress. It seems that the recovery disc I made is corrupt and I might have to buy a new Toshiba recovery disks. Any suggestions or information on how I can go about buying recovery disc Toshiba for my net book?

  Thank you! JL

  Hello

  To be honest I don t understand this with the computer and external drive. You have created recovery image on external HARD disk?

  Can you please tell me where you bought your netbook? This European model? I ask this because on the European models, you enter startup options using F8 at startup and fix my computer to start the installation of HARD drive recovery.

  In any case, if nothing is done I'm afraid, you must order the original Toshiba Recovery disk for your model laptop from Mr. I don t know where do you live and you can not send good link where you can order but you can contact the nearest Toshiba service provider and ask for help.

• Recovery and system recovery disks don't work is not on the MS213 Pavilion (All in One)

  Hello

  I ordered the HP recovery discs as F11 will not work. I got 4 disks with one separated from the others. He said "use this first! The other 3 were combined, and they are marked the system recovery and disc 1 of 3, 2, 3 and so on. I restart the computer with the disk that says use this first. The disc starts to load and says loading files of Windows, or somehting like that. Then he said: Windows startup. I don't get the Recovery Manager menu. After a few seconds it ejects the disc, and there are 3 pictures on the screen, at the top left is like a circle with a check mark in it. With an arrow, it points to an ejected drive of a computer image on the disc tray. And it points to a picture of a computer with 3 drives. It seems that he tells me to put in the next disc. I put in one that is graduated from 1 to 3, the light on the drive flashes, and then nothing happens, regardless how long wait. If, instead of starting with the disk that says this first use, I start with the one who said that 1 of 3, after loading Windows files, it says something like "this disc is not for this computer.

  System information:

  HP Pavilion MS213 all-in-one

  Windows 7 64 bit

  Configuration of stock

  Background:

  It is a friend's computer. She was making a mistake "code purple" with the resumption of F11. She had someone watching and I don't know what they were doing, but when I got it, I was getting an error at startup. somehting like cannot find the Boot...

  I found a commercial version of Win 7 64 bit standalone disc and installed on the machine. It runs great, but it had to be for troubleshooting only, until I have the recovery disks.

  So, I'm stuck and would appreciate any help. I thought initially upgraded to Windows 8, but I thought that the recovery disks will be cheaper, and also the friend doesn't have to go through the inclination of windows 8.

  I will be happy to provide more information if necessary.

  If you can read the license key Microsoft Windows 7 of 25 characters related to the machine, you can download a Windows 7 ISO file to burn to a DVD. Remember, it is the version that is listed on the Microsoft COA sticker.

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite U500-1DV - recovery disk does not work

  Satellite U500-1DV
  When windows starts up the first time, and while Toshiba request is things installation and system configuration, Windows crashes and restarts the system.
  What can I do? It happens every time.

  Thank you

  It may be the laptop computer hardware problem or recovery disk.
  You can try to start the installation using another disk installation disc for example clean Microsoft Win 7.

  If the installation would be functions, then your laptop s material should be ok and the problem is with the recovery disk

• Have Windows XP, HD crashed, recovery disks don't work, the new HD installed, have no windows XP disk, I have the product key. How can I install windows XP

  HP S4200NX was stopped abruptly after a PC waiting longer than normal to stop.

  Next tried to boot the PC. Safe mode options is displayed. Selected options, nothing has worked.

  Ran test, HARD DRIVE SMART 1 FAILED SHORT SELF TEST. Couldn't use recovery tools, disk set.

  Installed a new HARD drive. Message received the error 'could not locate the MS user agreement acceptance. " The last error message is

  "NTLDR is missing"

  Office did not come with a windows disc, but it has a label Microsoft of authenticity with the product key on the top of the PC.

  I'll be able to get software for Windows XP Home Edition

  Reinstall Windows XP by using recovery disks in HP S4200NX.

  http://h10025.www1.HP.com/ewfrf/wc/doclink?LC=en&cc=us&product=338684&tmp_docname=bph07145

• 2000 HP recovery disks don't work

  I have a laptop HP 2000 with Win 7 64 bit.

  I tried to reinstall using the recovery disks that I made to my computer, they do not work. I got a box saying that my computer is not taken in charge, etc.

  I ordered the HP recovery disks, using the number of my product, they finally arrived and same result:

  This computer is not supported by the system recovery media

  you will not be able to continue to recover this system with these media

  error:

  0100-3676-358B-358C-358D-358E-358F-3590-3591-3592

  I called HP support and I gave to the first person information (product, series, etc.) and he insisted that I ordered the correct disks. I explained that I had ordered online, provided all the information requested and could not reinstall. He told me that I need to reorder online and it would help me so I came back and began to reorganize, even if I didn't feel I should have to pay. He then told me since it is their mistake, he would transfer me and I would like to get free new disks. I was transferred to another number, I began to explain my situation and he said that they were not supported and it would be for me, but back I'll transfer. They started to ask me the same questions and asked what I was getting the error... I had to end the conversation in order to prepare for work.

  I installed Ubuntu to see if there is no problem, no problem. I was hoping to reinstall the original software, but could not. I reinstalled Windows 7 (I have the key that is on the bottom of the laptop), but there are a few unknown riders I need to reinstall it. Difficult, when we look at and no indication as to what the drivers that they are (network, etc.)

  I need help, suggestions.

  Thank you.

  Paul, I'll give you a kudo for your help, not only for me but for others.

• Recovery disks don't work

  I had to make the recovery of the pc on my HP windows xp
  It reads the disc #1, but it will not read disc #2 I can do? Now he says he will not fulfill the pc recovery please help!

  Can I buy windows 7 and put my computer with it?

  I thought about it when he got to the point where my computer does not read my the pc recovery
  Disc #2 stop computer with the #2 pc recovery cd and when I turned on my computer press F10 and tried the pc recovery again it says that it must succeed if recovery disk #2 then automatically it began to read the disc #2 because he was already in the computer and it ended correctly my computer was restored I am very happy

• Satellite P200D Vista recovery disk will not work

  The OS is screwed on this laptop and when I try to boot normally a blue screen flashes so fast that you can't read and it stops. I try boot in hosted HDD repair he said: "the installed program cannot start. Click OK to turn off the computer. The CD drive is broken so I source and cd-rom external and started up the Toshiba restore disk. Who gets however that

  Waiting for ODD vacancies
  E ODD drive ready
  Check for support in the E: drive...
  /

  Then it basically crashes for this. Any ideas? Thank you

  > Any ideas?
  Swap the optical disk drive and you will be able to use the recovery disc. You can get it on eBay and it is not so expensive.
  I fear that external device is not correctly recognized and there is no access to recovery media.

• Replaced the hard drive recovery disks don't work

  Had the HDD out on my laptop DV6710. Replace it with the exact type. Order recovery dvd from HP. When I try to restore using the first disk, I get the message "no media found. It is the second disc to the dvd player is ok. I changed the boot order and tried what other stuff I've read on this Board. Someone has an answer to help me? So, I would be very happy.     Thank you...

  Have you checked your model pilots page to see if there is a firmware for optical drive? Call HP and tell them that the laptop does not start the first disc... they will usually send a replacement set.

• TouchSmart IQ500: Want to reformat but recovery disks don't work

  I'm trying to reformat the hard drive of this computer. I made a set of recovery discs and want to wipe the drive and reinstall, but I can't boot from these DVDs. Windows checked their after that I burned them, but they just turn.  I can reset it to the factory using the D drive recovery partion but I want run dban then restore to factory settings.

  I tried other discs, as a Windows Vista Ultimate, and big boots, so the drive is not the problem, the discs are.  Any thoughts on how to get out of this pickle would be apprecaited.

  vistamac wrote:
  

  Thank you @Erico. My problem is if I switch the computer to someone else, and their car breaks down, they have no way to return to the factory. The drive is more than five years, and it happen sooner than later. Not to labour the point, but the recovery media started on my MacPro. Is there a reason, you think that it doesn't initialize the TouchSmart, or is the HPs just tempermental?

  Second, if I have to live with a factory reset, which will be more wiping of free space, clear enough my old data system?

  In addition, appreciate any thoughts.

  A factory reset, which removes the partitions and then create fresh OEM partitions, should suffice.

  If you still have doubts, then replace the drive by another and take a hammer to the original. It is the approved military method of removal of data from a hard drive.

  Once the trays are broken, no one can recreate the data.

  Each person has a different level of paranoia.

  BTW, simply because the recovery started on the MacPro does not mean he'll run there.

  A HP Recovery Manager inspects the hardware in the computer to verify that it meets HP criteria for the particular platform, it was designed for before his execution. It is by design.

• Cannot restore Satellite 2415 - S205 from the recovery CD

  My laptop model is Satellite 2415-S205.

  I used the CD recovery of three in the past to restore my computer to factory settings and they worked without any problems.

  Earlier today, I tried to repeat this same process, and, for some reason, it didn't work. The first disc is loaded without problems. But then once asked that the second CD and I put in it, it gave me an error saying: "version mono user cannot make multiple loads.

  What it means? I tried to remove the disc and just put it back in several times and it won't work. I'm basically stuck in the middle of the recovery process and I can not do something. And I'm afraid to turn off the computer, because the instructions that come with the States of the CD that you should not stop the process once it is started because it will seriously damage your system.

  What is the cause? What should I do? I really need help!

  Using Toshiba recovery disks?

  Maybe his detects a previous installation or something. Try to remove all partitions on the HARD disk and re-run recovery.

  You can use a floppy MSDOS with FDISK to delete partitions non-dos.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?