Impression of HP c7180 printer black with lines through it

Similar Questions

• Office Jet 6600: How to print black with color ink run out?

  How can I print black with color ink are empty? (I have gone to properties... black and white only... and allow black ink only a few times, but I get the options for onlinr purchases, cancel printing or help.)

  When I click on it help States I can print with the depleted cartridges, but it doesn't tell me how. Can someone please?

  Hello

  For your printer, it is only possible to print only in black when the other cartridges are exhausted.

  If you want to know more about it please check the document below

  http://support.HP.com/us-en/product/HP-OfficeJet-6600-e-all-in-one-printer---H711a/H711g/4322968/model/4323587/document/c04331666

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

  I work for HP

• I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  In the Lightroom preferences, uncheck the box, 'GPU use' on the performance tab.

• Pages / Question: printing black fine lines table in black instead of halftones

  Hello community,

  someone know how to print tables with fine black (i.e. below 1 point) lines without halftoning of pages?

  I tried on several printers (laser and ink-jet, color as well as PC, usb and network connections).
  No matter what line table below 1pt is pure black halftone instead.

  It affects only the rows in the table. Forms with fine lines, small texts, etc. are okay.

  Any ideas? Help, please.

  Hi fraha,

  Try this. First turn off the grid.

  

  Now apply cell borders

  

  Print Preview

  

  Please answer if that is not what you want.

  Kind regards

  Ian.

• When you print photos it prints black evey line 1/2 inch on the page

  My Photosmart HP 7510 prints black lines every 1/2 inch on the page when printing pictures what is the solution.  I cleaned the print heads and the print quality and the allignment.  What Miss me?

  Hello

  I would suggest trying a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• Adobe Acrobat Reader DC print black number lines

  Hello

  I have a big problem with printing in format Adobe Acrobat, DC. The PDF looks fine in the drive. But when I print it, several lines are replaced by thick black lines. I tried different printers and printing to a PDF file, but the problem remains. When I print the file using another PDF (SumatraPDF) drive, it works perfect.

  It seems that this error after you apply the updated Windows 10 anniversary.

  Kind regards!

  Jonk is correct. Here is the link.

  Acrobat Reader DC print scratches after the update of Windows 10 anniversary

• Document print black with a grey shadow

  I have a HP Photosmart C4480 all-in-one, equipped with Vista 62 - bit, Windows 9.  After copy and paste an article, the paper printed with black and a gray shadow, as 2D.  I printed out a sheet of test and it came out beautiful.  I am currently on all updates.  Thank you.

  Hi there adrianna13,
  
  Looks like a software conflict any if it persists, try to download and the doctor print and scan running located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening. Otherwise, I'm glad to hear that you are currently running. Let us know if/when it changes.
  
  Good luck!

• MOD HP 5510 printer B111a print black with the new windows 7 64-bit cartridge

  I am writing because my printer does not work when I try to print something black, because it turns black into gray or prints any and page out of still virgin. Is this a problem involving the printer or it has something to do with the new model of cartridge?

  Thanks for your help!

  Have you tried to clean the cartridges to print 2 or 3 times?

• Photosmart C5280 print black vertical lines on documents.

  Any program you print from, lines appear. They also appear on the Windows Test Page. However, they do not appear when a test page is printed to the printer.

  I tried to install the printer on another computer, but the same thing happens. Head cleaning and alignment do not help. I scanned a wonky page to give a bit of an idea of what's going on. Then I tried different print settings, fast/project, general, of the word and the printer prints correctly again. Windows Page of Test prints correctly also. This is the second time this problem occurred. The Chuck and buy a new one?

  Operating system is Windows 7 Enterprise 32-bit.

  

  Hi there Raddy1977;

  Have you used this article?

  Go to the link provided and follow the instructions in the article is a guide to many of the troubleshooting steps that will correct the problem you are enduring is imperative that apply you it in the order presented, without leaving any.
  http://support.HP.com/us-en/document/c01005561

  Let me know the results;

  I hope this helps!
  RobertoR

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When playing solitaire, video is black with lines and no color.

  Part of the video has changed when I downloaded some updates. It is supposed to be a colored background. But now there is no color, and I don't know where to make these changes. This als happens with other programs like Skype.

  I have no idea what updates you have installed but sometimes
  an updated video driver can be installed that can not be
  also compatible with your particular system like the one that you
  already had.

  It may be interesting to try to do a restore of the system at a time
  before installing updates:

  See the following article:

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It may also be worth a try of going back to the previous
  version of the video driver.

  See the following articles:

  Proceed at your own risk *.

  Windows Vista - restore a driver with its previous version
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-a-driver-to-its-previous-version

  Vista - Device Manager - Roll Back Driver
  http://www.Vistax64.com/tutorials/165382-Device-Manager-roll-back-driver.html

• Black vertical lines through copies self-powered

  I have three all-in-one, Officejets 5510, 5610 and 7130. They all worked perfectly at first, but over time, each has developed the same problem.

  When I put a document to copy on the glass, I get a clean copy. But, when I auto-feed it upwards to photocopy, copy comes out with a vertical black line on the length of each sheet copied about 3 inches from the left side. What is this and can it be resolved? When copying multi-page documents, it probably would be nice to use the automatic feeding system and get a clean copy!

  In the area of troubleshooting the HP site, I see only references to the white lines. I have the black!

  Click here

• Printer giving horizontal lines through the text in the print quality report.

  I ran through the troubleshooting steps.  Use all of the HP ink (and always have) I cleaned the printheads through the steps.  The color blocks out now clear - also received streaks before the troubleshooting steps.  The black bloc also lacks a section in each of the blocks of color.  The text at the top is still missing some parts.  I also replaced the black cartridge with a brand new.

  Can it be fixed or I am looking at a new printer?

  Of two things happening. The printer just needs to be aligned, or the print heads are gone.  You can find the alignment in the same place, you can find the print head cleaning.  If the alignment fails or does not solve the problem, the print heads went out and must be replaced.  The print heads have their own warranty, so be sure to check the date of warranty before look you at buying new print heads.  If the print heads are under warranty and need replaced, HP should replace it for free.  If the printer and print heads are more under warranty, it would be cheaper to buy a new printer, it would be to replace the two print heads.  Let me know what happens.

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• HP Officejet pro 8600 more: Page print black Pro with a few lines of Pentecost

  When I copy or scan by giving instructions to the printer, the pages are mainly black with some vertical stripes. If I scan the computer, using scanning and faxing of Windows I get a perfect scan.

  It is possible that these scans are using different wifi networks (my regular and direct network to the network printer); I don't know how to understand it! But it would not affect reproduction.

  Printing is fine.

  Hi @andreaallennyc,

  You're welcome and thanks for trying the HP print and Scan Doctor.

  Please, try the steps in the following order:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Disable all Antivirus programs. Disable Antivirus software.
  4. Disable all firewall programs. The WF of end-to-end.
  5. Create a new user account. Management of user accounts and connections (Windows 10).
  6. Reinstall using the printer HP install wizard for Windows.

  Try scanning/copying again. If this does not resolve the problem, the printer will need to be repaired / replaced. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!