Satellite 855D-S5120 - wouldn't boot efi file on the HARD drive

Similar Questions

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• How to extract the files from the HARD drive?

  I have a HDD1805 from a broken iPod 80 GB. I was wondering if there was another method I could use to extract the files from the hard drive.

  Hello

  Sorry, but I don t know what you mean exactly.
  Can you please explain exactly what you mean?

  What files you want to extract?

  Good bye

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• The files on the hard drives are considered as shortcuts, or appears as .scr files after a system restore to manufacturer settings

  Original title: I did a restore of the system for constructor parameters and now all of my hard drives do not work on my computer windows vista.

  The files on the hard drives are considered as shortcuts, or presents itself as .scr files and says a file is missing.

  Hello

  1. what happens when you try to access these files?

  2. do you get an error message?

  3. have you used earlier these files/folders?

  Step 1:

  You can check out the following link and try the steps suggested by Jamesarntz on July 21, 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/files-on-external-drive-have-changed-to-shortcuts/695db4cc-645f-4BD1-85c7-41671457fe11

  If the problem persists, try the following steps:

  Step 2:

  Download and run the tool of diagnosis from the link below.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Step 3:

  You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  For more information, see the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this information is useful.

• Satellite L40: How can I recover the files from the hard drive

  Hello

  Can someone help me please. About a week ago I started to have a clicking sound coming from my laptop Satellite L40. My laptop froze and when I restarted, I was directed to the system configuration with a message at the bottom saying
  "Pri Master Hard Disk Drive SMART status bad, Backup and replace."
  Press F2 to assume. »

  I pressed F2, but I don't have any idea what to do?

  Can someone tell me how do I backup my files until my HDD disappeared completely or if it was can I use another device to get down them.

  I tried using the recovery disk, but the disk does not respond?

  Help, please

  Pete

  Hello

  This message looks like a warning of S.M.A.R.T. notification
  This means that your HARD disk will eventually fail.
  It can happen in the next few days or it can't happen for a few months but the SMART feature has detected that the drive is wrong then it should be replaced as soon as possible.
  It seems that your laptop is not very old, so the warranty should cover all replacements.

  I see only one way to access and back up the data. Eventually, you could buy an external enclosure SATA USB HARD drive and was able to connect the HARD drive to another computer.
  I don't know if you will be able to access the HARD drive because of the failure, but if you want you can try this m.

  Good luck

• XP is not start properly, important data files on the hard drive, location unknown such as e-mail addresses, individual emails and favorite links on Internet Explorer. The system is damaged irreparably, what is the solution?

  I need ideas to solve this problem.

  You can retrieve the data without being able to get into Windows. The methods described require a certain level of computer skills. You know yourself best, and if a better course of action would be to take the machine to a local professional with a good reputation instead. If you choose to do, do not use a type of BigComputerStore/GeekSquad of the place.

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it- http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• How can I get all the files from the hard drive in the non-working Compaq Presario CQ62-411NR

  Ice tea seep keyboard laptop, and after drying it feeds on. If I try a hard reboot, it is stated that I would lose all the info in the memory and I can't afford to lose my mother pictures that are on the hard drive. Is it possible to get the hard drive to work in some other way so that I can get my photos and other files.

  You can remove the hard drive and put it in a USB Enclosure.Plug USB port, another machine, where you should be able to go through it and copy your photos off on the hard drive of the host computer.

  Example:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3743052 & catid = 2783

• Satellite M70-164: what is a default temperature of the HARD drive?

  I wonder if someone can tell me what are the default temperatures of the hard drieve of a satellite M70-164

  Hello

  It is not easy to say. It is based on the use of the HARD drive.
  If the turns HARD disk and OS write or read on/from the HARD drive, so the temperature increases, but if you use the laptop only for internet, so the temperature of the HARD drive remains on the low level.

• Why whs 2011 installation gets stuck to copy Windows files on the HARD drive?

  I try to install WHS 2011 OEM on a HP EX470 software.  I have tried about 30 times without supervision and welfare facilities in the past 4 months and am very frustrated that I can't succeed and purchase the software was a waste of time and money.  I tried 4 hard drives, properly formatted capacity of 250 GB to 2 TB.  EX470 has the original 1620 AMD processor and 2 GB RAM upgraded and qualifies for the upgrade to a 64-bit system.

  Problem with installation assistance tries: Installation says "Copying Windows files", but after a variable time in hours of waiting, growth remains at 0% and finally says "error in installation.  Try to restart the installation.  Same thing happens with the help of the DVD, or by using a Sandisk Cruser formatted and made bootable 16 GB flash drive with a file cfg.ini the instructions online and also tried without the cfg.ini file.
  Problem with unattended installation attempts:  Process completely blind.  Does not install even if left for 24 hours.  Cannot decipher the flashing lights on the Flash drive and thereafter, no installation nor evidence of partial installation is visible on check the hard drive on another computer.  I suppose that the same thing as the installation attempts assisted.
  Looked for solutions online for 4 months, but nobody does the problem of Windows not to copy the files to the HARD disk during installation and what goes wrong.
  Help!

  Hello

  I suggest you post your question to the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Lost access to the files on the hard drive.

  After you use the SYSTEM RESTORE, my office has lost access to all my files of data written and the pictures on the hard drive.

  I tried a backup disk or restart several months ago, but the drive will not read it!

  How can I restore access to "My Documents" and other folders?

  I use Windows XP with all updates of February/March 2013

  Alan / Alfasun

  [Moved from comments]

  Hi Alan,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you have lost access to the files of data and images after doing a system restore.

  I would appreciate it if you could answer the following questions to help you best:

  1. Why did you perform a system restore?

  2 do you have questions about the computer?

  3. If so, please specify the question to better help you?

  4. What are the data and images file format?

   

  System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system.

  Based on the current situation, I suggest you to Undo a restoration of the system after performing a system restore.

  Check out the link and check if that helps.

  http://support.Microsoft.com/kb/306084

  If the problem persists, or you have any questions about the restoration of the system, do not hesitate to let us know. We will be happy to help you.

• transfer files from the hard drive to laptop: access denied?

  The motherboard on my computer just died. I'm trying to get my documents, music, photos from the hard drive of the computer dead on my laptop. the old hard drive is in this removable thingy, connected to the labtop. The problem is that it says access denied when I click on 'my documents '. any suggestions on how to access the documents?

  When you move a disk formatted in NTFS from one computer to another, you probably need to 'Ownership' of files and folders on this drive.  Procedure is here:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• In Vista, it is possible to find and replace a specific name that I used many files on the hard drive?

  My apologies if someone already asked this (I couldn't find the answer however). I used the name of a person to dozens of (mostly Word) documents that are kept in many different files on my hard drive. I know that I can dig each document separately and then use hidden word and replace the tool to change the name. But this will inevitably take time. Is it possible to do a through - computer find and replace so that I don't have to do this exercise once? Any help gratefully received. Thank you.

  Hello

  I suggest you go through the article and check if it helps.

  Searching in Windows Vista, part 1

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Searching in Windows Vista, part 2

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Searching in Windows Vista, part 3

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this helps and let us know if you need more assistance.

• rewrite the file on the hard drive

  When I want to delete a file, and I want it to be difficult to get back on the hard drive where ever it is stored, I read something on the rewrite of a file over and over, and how do I do this?

  You need 3rd Party Software to do.

  http://www.SnapFiles.com/reviews/Eraser/eraser.html

  Eraser is a secure file deletion tool that allows you to completely remove sensitive data from your hard drive by overwriting many times with sophisticated models (USDoD, Gutman and others). You can simply drag and drop files or folders on the gum on request, use the convenient right click Windows Explorer extension or use the Scheduler integrated for Automatic wiping of unused space, browser etc cache files. Safe and easy to use!

  Or a Commercial: http://www.east-tec.com/

  But, all data can be recovered from a drive, using the right process; It doesn't matter what you do.

  See you soon.

  Mick Murphy - Microsoft partner