Satellite A100 - 225 Bluetooth stack does not?

Hi, when I install the battery/bluetooth drivers for my system in Windows XP, the installation seems to proceed normally. However in some ways in the installation process, I get a message saying "Please press FN + F2 to turn on Bluetooth". If I press FN + F2 nothing happens. If I press FN + F2, then on OK the message disappears - but then returned a few moments later. The process then repeats constantly, continuously asking I have press FN + F2 and the result is that I finally have no option other than to press Cancel. When I look at Device Manager in Windows, it shows that the driver has not been installed.

How can I get this driver to work properly and for Bluetooth is enabled on this system?

Hello

to me, it looks like the Fn key is not working properly.
Try to use another function Fn, for example Fn + F5 to switch to an external monitor.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A100-786: Win XP does not recognize the Bluetooth

    Hello

    When I had Windows Vista Home premium on my laptop, I used the bluetooth device normally.
    But I had to install Win XP and now he don't even know that I have a bluetooth device!

    Any help would be appreciated.

    Seems that you have not installed the driver of BT stack.
    This driver can be downloaded from the Toshiba page!

    You choose the Satellite A100 series form of the driver and download the BT software.
    Select it with FN + F8, and then follow the instructions on the screen.

  • Satellite A500 - 1C0 - Bluetooth monitor does not start

    Hello
    I noticed that a new Bluetooth monitor was released for my Satellite A500 - 1 c 0 and so I tried to use it.

    First, I downloaded the Bluetooth stack and Bluetooth screen and install it. As soon as I restarted my computer loaded Windows system default Bluetooth service. I tried to manually start the monitor installed, so I tried a Bluetooth Monitor and it came, but nothing happened. Ultimately the only way to get the old dos application had to use system restore. When I restored it to the previous system I just installed Bluetooth Monitor without installing Bluetooth Stack, and there it is again. I only use Windows Bluetooth utility.

    How can I disable the utility and use Bluetooth Monitor from Toshiba or I can do it by default? It does not even start.

    Thank you
    Stefanos Constantinou

    Hello

    You can post information please?

    What operating system you use and that you have installed Windows recovery disk or Microsoft?

  • Satellite A100: USB and Modem does not

    Hello!

    My name is Clarisse and I have a Satellite A100, which I use for school. I'm having a problem with its usb ports and modem.
    When I try to connect to the internet, he just say he of no tone and tells me to ensure that lines are connected, who they are and the phone line works certainly, as I checked with my PC and I also checked the phone if it was busy, it wasn't.

    I then try again and a window appears and says that there is something wrong with my modem, how can I fix?

    The other issue is my usb ports who refuse to work, they can't recognize anything I plug (for example, bluetooth adapter, flashdisk, ipod) even though they are installed!

    However, the strange thing is that when I plug in my printer it connects and does its job:(je suis tellement confus et scolaires est devrait commencer bientôt.)

    Can someone help me please?

    Thank you
    Clarisse

    Hello

    In my opinion the modem connection does not work due to the modem settings.
    Go to Device Manager and select the properties of the modem.
    Please select the Modem tab. You will find the option "wait tone before dialing." You must disable (uncheck) this option.

    I guess that the USB ports cannot recognize the external USB ports because of the power.
    The USB ports provide 500mA. It is a standard USB. If external devices use a power greater than 500 ma, so it is possible that the device may not be recognized.

    In such cases, the USB hub with an external power supply can solve these problems.

  • Satellite A100 - BIOS and Windows does not start after the BIOS update

    Hello, I extend my Satellite A100 laptop BIOS.

    After update, I can't start my laptop and the BIOS will not start.

    You see the Toshiba logo?

    Was there a power failure when you updated the BIOS?

    Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

    If this does not help, you will need to send it to a Service Center for repair.

  • Satellite A100-1011E - AV button does not work

    Hello world

    I'm new here but I have an urgent problem. I hope that you guys can tell me what to do. I have this laptop SATELLITE A100-1011E model. My AV button which located on the left side of the keyboard does not work.

    I'm sure that it works always 3 days ago, but I don't know what I did and it doesn't now. I n it's a driver issue cause I just bought this phone 5 days ago. I checked with this 'Toshiba' commands in the Panel and I've assigned to the right program (windows media player 10) but it does not work when I press a key.

    Can someone help me with this? :( Thank you very much.

    Hello

    Until you try anything roll back OS to an earlier time using System Restore tool. Maybe it will help you.

    If this don't work let us know.

  • Satellite A100 - Synaptics pointing device does not

    Hi all

    I have a Satellite A100-062, that is around the age of 10 months. The other day while I was using the laptop touchpad no longer meets nothing that do about it, including the mouse buttons. I did a system restore and then used the toshiba recovery disc but nothing solved the problem. Then I stopped using it for a few days I was getting ready to return to the shop, but beforehand, I thought I would try something. Before I had tried something I booted up it to make sure that the mouse was still not working. However, it was and I did not anything else to fix.

    I was wondering if anyone else has had this problem and if you have how many times it happened, and whether or not it is repairable.

    Thanks for any help in this matter.

    Hello

    If the touch pad does not respond after clean installation of the operating system (DVD release) there must be a hardware problem. I recommend you contact the service provider authorized in your country. After 10 months the warranty should still be valid. Let check the touchpad and if there is a hardware problem it will be exchanged free of charge.

  • Satellite A100-234: Bluetooth stack 30 days trial only

    Dear Forum,

    My Toshiba Satellite A100-234 just recently upgraded from Xp to Windows 7, downloaded and installed the last BT stack which supports windows 7. Installation was successful, the bluetooth devices work well.

    My question is... Why I only limited to use the 30 day trial period where infact I use PC Toshiba laptop.

    Y at - there a patch to make it fully activated without limited period. From Toshiba Web site address to trigger this query?

    If someone wishes to help solve this problem, it will be very appreciated.

    Thank you...

    Miller

    Check out this FAQ from Toshiba:
    http://APS2.toshiba-tro.de/KB0/FAQ81021V0000R01.htm

    + This message is intended for third-party developers of Bluetooth adapters, but may appear if you use such an adapter with the Toshiba Bluetooth Stack - rather than with the stack of the manufacturer of the adapter. The third-party Bluetooth adapter can operate with the battery Toshiba Bluetooth, but only for a 30 days evaluation period. +
    + For your Bluetooth adapter is working again, you must install the battery correct Bluetooth from the manufacturer of the Bluetooth adapter. +

  • On the Satellite A100-784 Internet connection does not work

    I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

    It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

    Thank you all in advance and my apologies for the newbie question.

    Each router must be configured and the right data ISP (internet service provider) must be inserted.

    -Don't configure you the router?
    -How about the TCP/IP settings? All the settings are set to automatic?
    -How about firewalls? Have you used one or you turn it?
    -Have you tested different browsers?

    Please check the points above.

  • Satellite A100 - 906 internal LCD does not work

    Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
    Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
    What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

    Help, please.

    > External monitor works too.
    You said that external monitor is not affected. Right?

    Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
    If the graphics chip would be affected, both screens would not work properly.

  • Satellite A100-062 - USB mouse does not work

    Hello

    I have a Satellite A100-062.

    I've never been able to get a USB mouse to work with her.
    The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually the message material has not installed successfully.

    So I have to rely on the touchpad, the problem seems to be limited to mice only, I've successfully used a USB webcam without incident.
    I tried several USB mouse with the machine exclude a problem with my original mouse.

    Has anyone else had similar problems?

    Thank you

    > So I have to rely on the touchpad, the problem seems to be limited to the mouse only, I have successfully used a USB webcam without incident.
    Looks like a problem with the USB mouse and not with the laptop or with USB ports
    I would recommend testing different mouse and using the other.

  • Satellite A110 - 225 FN key does not work

    Hey,.

    For some reason, I cannot adjust the brightness on my screen with the button FN and F6 or F7. It worked a few months ago, but no longer works. The FN key works, I get a green light when I press it. In addition, the combination of F1 - F5 are working only F6 F8 does not work. I can't adjust the brightness, or wireless capabilities...

    using windows xp from the original installation...

    any ideas?

    Thank you

    Hello

    Visit the page of European driver of Toshiba and download the utility of keyboard shortcut for the A110 - 225 (PSAB0E)
    Try to reinstall again!

    Check it!

  • Satellite A100-447 - DVD player does not read some discs

    Hello

    I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.

    The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.

    Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.

    What can I do?

    Thanks for your help.
    Adam

    Hello

    You can do the follwowing:

    Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,

    Download the latest update of the firmware for this drive, install it, and then try again.

    Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.

    Welcome them

  • Satellite A100: Toshiba Power Manager does not work

    Hello everyone!
    I just installed Vista on my laptop (originally I had Win xp on it)
    First I installed video drivers from toshiba.com
    Then I installed the bios update and additional package toshiba.
    But the toshiba Power Manager does not work!
    Vista uses only its tools to manage the battery.
    Can you help me?

    Thank you!

    Why do you offer the Power Saver doesn t work properly?
    You are getting error messages or what?

    The Toshiba for Vista energy saver is not the same as for Win XP.
    You can find some additional options in Vista power options!

    There, you can choose between 3 different power option.
    Choose one and click on the link below changes the power options

    The new window should appear and you can click on change advanced power settings link.
    In a new window, you can see the Toshiba Power Saver Settings.

    Good bye

  • Satellite A100-PSAA9E - FN + F4 does not not for the hibernation

    Satellite A100-PSAA9E

    I installed Windows XP pro and that you have installed all the drivers.
    I installed the controller driver and the driver Toshiba Hotkey.
    I don't have to put my laptop into hibernation

    Someone knows how to fix this?

    Could you please after how do solve you this problem?
    It would be interesting to know.

Maybe you are looking for