Satellite A100-813 bad when image quality is connected to the TV

Similar Questions

• Re: Satellite A100-813 - BIOS reports inserted 3 GB but 4 GB

  Satellite A100-813
  Model No.: PSAA8E

  Recently, my laptop 2 GB memory @ 533 mhz were bad and I decided at this level to 4 GB and carried 2 x 2 GB @ 633 mhz.
  Though according to the instructions in the manual, it supports 4 GB maximum, but my bios shows/3 gb.

  My Windows 7 64 bit, shows 4 gb, but with 3 GB usable.
  Please if someone can help me get all the 4 GB, is there any problem with the highest FSB.

  I thought also of shared video memory, but when only 2 GB is inserted, the bios displays full 2 GB.

  The laptop supports Mobile Intel® 945GM Express Chipset
  The chip supports the 4 GB of RAM.
  Then you should be able to use 4 GB

  What the BIOS update?
  Check this box

  With regard to the recognition of the Windows RAM:
  In msconfig.exe to go to the boot tab, click Advanced Options, make sure that the Maximum memory checkbox is unchecked

• Satellite A100-813 - Express media buttons no longer work after XP install

  Hello

  I have a laptop Satellite A100 - 813 (PSAA8E). After you have reinstalled the operating system (XP), it's on purpose media buttons do not work. I don't have a recovery CD express media when I bought it. When I checked in the Toshiba Web site, it is not available.

  Please give me a solution.
  Concerning
  Prasanth

  Hello

  For these special buttons, you must install the tools of Toshiba. Did you check that?

  On the Toshiba site I founded the document setup instructions for your laptop and XP. It is a list for recommended order of installation of drivers.
  This means that you will also install Toshiba common Modules, Hotkey Utility, enabling/disabling Touchpad utility, utilities, etc.

• The wrong processor speed is displayed on my Satellite A100-813

  Satellite A100-813, I bought a week ago. When you right-click on my computer and take the properties, you can see the details of the system including CPU speed and RAM etc.

  The speed of the processor showed 2.00 GHZ, 0.99 GB of RAM up to this morning, but now it's show 1.99 GHZ instead of 2.00 GHZ. As far as RAM is concerned, it is show as 0.99 GB.

  Pease help me to clear up this confusion... Thank you & best regards

  Hallo Najam

  Your laptop has Intel graphics shared memory card. This means that this memory of the graphics card RAM memory. Because of this it will be always shown less than what they should be indicated.

• Re: Problem installing WLAN device for Satellite A100-813

  Hello

  I recently formatted my laptop and went to the toshiba driver download section.
  And downloaded and installed all the drives except my NETWORK LAN and WLAN NIC card.

  I tried to download all driver, but usually still install.
  I tried to turn on the WLAN and tried again, still no luck.

  Here is a picture of what I still need to install.
  [photo: http://img9.imageshack.us/img9/3751/80023479po1.jpg]

  Thanks in advance
  -Scott

  Hello

  Seems that you tried to install the drivers bad for bad notebook series.
  Satellite A100-813 belongs to the series of PSAA8E and the laptop was equipped with Wireless 3945ABG Intel and Intel Pro/100 LAN card network card.

  If both are of the Intel chips.
  Check the Toshiba pilot European page again and try reinstalling the drivers!

  Good bye

• WIFI problem, Toshiba Satellite A665 internet connection. Lately when I try to connect to the internet, for the first minute or so it says "no internet connection".

  Hi all

  I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.
  I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.

  If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.

  I hope this helps.

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• There was an error when you attempt to connect to the Windows Live Calendar service.

  I get this message when trying to update my calendar:

  There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  What can I do to fix this?

  Hello Maurizo Martino,

  As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
  Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.

  They will have experts in the Windows Live products that can better help you.

  Sincerely,