Satellite A100-998: Wlan does not work with Mandriva 2007Linux

Similar Questions

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

• Satellite Pro L10: WLan does not work with Vista

  Hi all

  Have tried to get the WIFI adapter works on Vista, have downloaded the latest drivers but still no joy.

  I know it works because I have a dual operating system: XP & Vista.

  All ideas,

  Thank you

  What do you mean exactly by still no joy? Have you installed the right driver WLan and has been the WLan card recognized in the Device Manager?

  I think the laptop is using wireless Mini-PCI Intel PRO/Wireless 2200BG Network card.
  In order to check again if a good driver was used.

  Please don t be angry with me, but it is a book of 5 years and I m sure that it s not Vista capable of course you can install Vista on this unit but it of not impossible that some devices would not 100% compatible.

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

  Does not work with 3 GB or 4 GB of memory, only 2 GB!
  And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

  He arrived with 3 laptops. (Sorry, my English is not good :))

  Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
  Isn't it?
  Maybe you should check the manual of the first user that is preinstalled on your laptop.

  I think you would find information very important.

  Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
  As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

  Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

  Good bye

  I think that you can assign 10 points ;)

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Satellite A100 (PSAA9L) - the does not work Windows XP it has close

  Hello
  I recently put a satellite A100 (PSAA9L) and when I try to turn off the laptop. It shows the closing of the screen but does not work, stop.

  Please tell me what to do with this problem.

  Thank you!!!

  Hello

  There must be something wrong with the OS files or registry entries.
  Maybe some background process cannot be closed and therefore the shutdown process does not
  Microsoft has released a useful document about solve the shutdown problems in Windows XP.

  Please check this box. Maybe this helps:
  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

• Satellite C660-121 - WLAN does not work

  Hi all

  I have problem with Toshiba Satellite C660 - 121.

  I installed new windows, and now my wireless does not work. I downloaded all the drivers LAN, WLAN etc. and WLAN will not work, I put the internet cable in the laptop, but not by cable or WIFI internet connection: S

  Please can someone help?

  Edit: in the Device Manager, NETWORK CONTROLLER is not installed, but I can't find that anywhere and I can't find any Wi - Fi network!

  Which Windows version have you installed on your laptop satellite?

  At first check if the WLAN and LAN card card are installed and registered correctly in the Device Manager?
  If Yes, you must enable WLAN card by using the FN + F8 key combination. Can you do this?

• Satellite Pro M30 - WLan does not work

  My Satellite Pro M30 laptop is about 5 years old and is a refurb. Until yesterday, my wireless connection was very good. Although my wireless connection is running with high speed and it is connected, I now cant get on the internet without using the ethernet cable.

  It is certainly a problem with the laptop itself.
  A framework has changed (perhaps with a function key?) or the internel wireless card packed.

  Can anyone suggest anything I can try with the laptop first before you buy an external wireless card?

  Thank you.

  I don't think there is that you can do.

  The wireless network card appears correctly in Device Manager.
  Make sure that the wireless network card is enabled correctly (FN + F8).
  There may be a problem with the WLAN antenna. Who knows?

  Anyway, if you can't get this to work once again use small USB WLAN adapter and be happy.
  To be honest, is not bad idea because new USB WLAN glue can work with G WLAN or even N. The original WLAN card in your notebook is, I guess, old A/b.

  Good bye

• Satellite A100-596 - RAM does not work in location B

  After meeting with the blue screen of death, my A100-596 was out of service for some time. I decided to give it a last violin and had it work. I removed one of the modules of 512 MB ram and it works fine.

  The problem is that if I put the RAM module the computer starts not (the same problem that he had). I used a program called CPUZ and it recognizes the RAM in two slots (if I insert the other when the computer started upward).

  Why CPUZ recognizes the RAM, but windows does not start with it inserted or even to recognize.

  I've played around with the RAM modules. Two of them work in the A slot but neither location B. The maximum extension of my motherboard is 2 GB, it means that I can't put a 2 GB module in one of the slots?

  It seems strange that CPUZ fortunately sees the RAM in slot B, but windows does not start with it in.

  Help, please.

  > If I insert the other when the computer started upward
  Really pass the RAM if the computer was started? Laughing out loud
  I think that this is not a good idea. An upgrade of RAM should be done only if the computer or portable computer is turned off.

  I put t understand why can CPU - Z can recognize the RAM but Windows not? To run CPU - Z, you must start Windows before.

  However, I think that if both modules n t work in location B the slot is faulty.
  Also if you can upgrade the laptop to 2 GB not using a module with 2 GB of memory. Use two modules with 1 GB for each module.

• Satellite C660-1NW - Webcam does not work with the facebook chat

  Hello

  My doughter recently bought a Satellite C660-1NW youcef.
  This laptop has a webcam on board.
  When you use Facebook, webcam chat, webcam does not work.
  The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
  Audio works.

  Skype using the webcam works.

  I have updated the drivers but when same no go :(

  Please help move facebook webcam

  Greetings,
  PP

  Hello
  If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.

  Your Adobe Flash Player settings will be displayed.
  On the tab, make sure you only select the right type of camera you use with your computer.

  On the tab, you may also need to 'allow' Facebook to access your camera and microphone.

  If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.

• Re: Satellite L20-112 - WLan does not work after installing Win XP

  Hello

  I reinstalled Win XP on my old laptop, and all my drivers disappear.
  I downloaded all the drivers on the official website of Toshiba, and unfortunately the wifi does not work.

  My Notebook: satellite l20 - 112 psl2xe, win xp sp3, sticker for computer laptop-atheros WiFi-.

  Thank you in advance.

  Hello

  This means that you need a WLan driver or what do you exactly by wifi does not work?

  Do you know what WLan card you have exactly?
  You could install the hardware like Everest Home Edition diagnostic tool which would provide information on the WiFi chip.

  PS: Here are all of the WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite A100: Crossover Cable does not work

  I have a laptop TOSIHBA SATELLITE A100
  I tried to connect my laptop to another computer by Cable Crossover
  and he wasn't wotking, the sign (X) appeared to me as if the cable was not plugged.

  Note that (when I put my cable DSL ' it works well on the net)
  to know that I tried this cable with the other compuers, and it worked fine.

  Hello

  Strange?  :|
  I think that it s certainly not a physical LAN port problem because as you have already said the ADSL cable works fine.

  You have the right settings TCP/IP to connect to the other computer?
  Both computers must be in the same workgroup. In addition, you must set the IP fix, the subnet mask and the gateway!

  Also, try to remove the map LAN device manager and restart the laptop.
  After the new reboot the OS must load the required drivers and should recognize the card even once.

  Good luck

• Satellite A100: internal microphone does not work

  Well well, my type cell phone (or so it is said) is a Satellite A100, I have everything (I think) works fine, but it is only when I try to use my built-in mic phone the problem starts, it won't work!

  It is said there is a built-in microphone, but the bar will not move as he cannot hear my voice, even when I'm screaming! I tried on msn thinking it was a small problem, but he said that had heard no noise!

  It worked fine when I plugged my microphone in my webcam installed, but the problem is now, my older brother was and broken than microphone and I wanted that my only integrated to work but is not!

  He said that the microphone is a Realtek audio HD with SRS, so I need to know if anyone can help me with this? Please?

  Hello

  Could you post a detailed laptop Satellite A100-xxx name?
  It would be very interesting to know if the laptop supports an internal microphone or not.

  To my knowledge, some of the A100 don t support the internal mic and that is why you should use the external mic