Satellite A100 and Plug-and-play devices

Similar Questions

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• my computer says that the hlnfd on my plug n play devices does not or is not found. His original my computer to hang and I can't fix.

  my computer says that the hlnfd on my plug n play devices does not or is not found.  His original my computer to hang and I can't fix.  Any ideas?

  Original title: does anyone know how to do the hlnfd works on my windows 7

  See this. This seems to be a remnant of some malicious software

  http://www.bleepingcomputer.com/forums/t/520743/hlnfd-missing-driver/

• Problems with Plug n Play device drivers

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '. I tried the search function for a folder called instr.lib, but I couldn't find one on the computer. I made a new folder instru.lib and run one of the files .llb, which opened in LabVIEW, manually, but they gave me ten mistakes most read like this

  "-VI should happen to ': \hp81110a\hp81110a.llb\HP81110A Reset.vi' has been charged with"C:\Users\Lab\AppData\Local\Temp\Temp1_hp81110a.zip\hp81110a.llb\HP81110A Reset.vi"

  I tried to manually navigate to the folder \AppData as to move to the folder where they were expected, but I did not see this .vi when I opeend my user \Lab\ folder.

  What happens here?

  Thanks in advance!

  vweltin wrote:

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '.

  Your operating system is windows, no?

  You search under \Program Files\National Instruments\LabVEW (version)?

  Apparently not that you are looking in the right folder of LabVIEW.  You should see:

  applibs

  self-test

  CCodeGen

  cintools

  Database

  examples

  Help

  InStr.lib

  Internet

  ... and so on...

• Plug n play devices moved it espically keyboard drivers

  Plug n play devices will not install the drivers out there

  Windows 7 64 bit

  error says windows configured to never install driver update

  another error is the problem with the PnP devices

  Please help as soon as possible because I do not have a keyboard because of this error

  also says Port_ #0002.Hub_ #0004

  The drivers for this device are not installed. (Code 28)

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  the problem in driver code details 0000001C

  Hello

  Thanks for the reply. I appreciate the troubleshooting that you tried it on the computer.

  The driver is specific to a particular model of the computer.

  What is the exact brand and model of your computer?

  If the driver for this operating system is not available on the manufacturers Web site, we have an option to install the driver in compatibility mode.

  You can also contact the manufacture for support.

  Please respond with the required information. I'll be happy to help you.

  Thank you.

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• Windows XP 32 bit ceased to recognize plug and play devices.

  Recently, I had a virus and had to reinstall windows. After installation, I've updated all the drivers and Windows updates. My mouse, keyboard, monitor, and wireless adapter to work correctly. After about 3 weeks, I went to install my printer. I installed the hardware, but it could not connect to the printer. I followed the instructions of the manufacturer again and again but it never connects. His grateful sound because when I turn on the printer or offshore, I hear 'bing', but it doesn't connect. I used the "New hardware found" Wizard with the disc in the drive and it looks right and research, he never does the program on the disk. I tried to use the camera to Windows and the scanner Wizard with no luck.
  After that I gave up, I tried to use my camera, that has worked well until I reinstalled it and it happens "New hardware found" and the "new hardware detected" appears, but it does not recognize the CD, just look and watch for hours. I got fed up and finally bought a "plug and play" card reader SD and the bubble appears in the toolbar "new hardware found", but then the "new hardware found" stands and asks a disc! Its a PLUG and PLAY! There is no disc! The material is on the device! It's not my USB ports because he DOES not see something trendy and I checked Device Manager and he said his work without no problems found, but it does not connect to it. Does anyone have any info on what this might be? ANY help with this is greatly appreciated! Thank you

  Hi pressure,

  Peripheral Plug n Play need driver for the operation.

  PnP means that you do not have to restart the computer to install something.

  I suggest to update the drivers for the chipset of your motherboard and see if a firmware update is available for your BIOS.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 and WXP - some drivers are missing

  I received a SatPro A100 and I have Windows XP installed and most of the drivers are installed and working but it is four points of question mark in Device Manager.
  Can anyone help.

  Ethernet controller
  Network controller
  Unknown device
  USB device

  Can someone tell me what drivers to use and where to find them?

  Hello

  Please don't get me wrong, but I really wonder how you want to install correctly on your Satellite Pro A100 WXP.
  Last question confuses me completely. I thought that you got all the drivers of Toshiba, support and download page or maybe I misunderstood something.

  In any case, your laptop is fully supported for operating system Windows XP Home edition and all necessary drivers, tools and utilities that you can find on http://eu.computers.toshiba-europe.com > support & download
  Choose your laptop model and operating system and you will all ready to download stuff.
  A tip for you: if I well remember Toshiba also offers document Instructions of facilities with the exact order of installations.
  So please download and check this list and install all the stuff in this order.

  I assume that you lack driver chipset, LAN driver, driver WLAN and obviously more than that, but I don't know what unknown device is in the list. Can you please send device ID?

• Re: Satellite A100 and 3D card drivers

  I had problems with my drivers and front 3d map.

  I got a Satellite A100 (psaa9c) and I reinstalled my windows. I put the new drivers after reinstalling but I have the same problem... when I play games PC stops.
  I put the drivers for A100 psaa9e... There is no drivers for psaa9c on this support site.

  These drivers work perfectly for my 3d card or y at - it somewhere where I can get specific drivers for psaa9c.
  I also had a fan under my lappy but it always crashes.
  Is my card 3d on its last leg?

  Could there be other problems I do not? Is - this driver issue? My friend changed the gell contact between chips and fans and heatsinks etc and he assured me that he has done a good job.
  Any suggestions? Advice?

  > I put the drivers for A100 psaa9e...
  >.. There's no drivers for psaa9c
  >.. is there somewhere where I can get specific drivers for psaa9cWhat now? You can not find the drivers for this model of laptop, but you have installed the drivers for it? ?:|
  Where you bought your laptop? What country?

• Satellite A100 and memory upgrade

  Satellite A100-523. Why only increase my memory to 1536 MB and 2048MB not as shown in the analysis of the product?
  The laptop won't shoot upward on 2048MB.

  Has your laptop memory graphics card shared?

• Satellite A100 and blue screen

  I have a Toshiba Satellite A100, which is about 4 years old.
  When I start the computer, I get a bluescreen with an error message until I see my computer background. But I can successfully start in safe mode.

  The error message reads:
  "
  A problem that summer detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer. If it appears the following steps once again. :

  Run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check and look for faulty or incompatible memory. Try changing video cards.

  Disable or remove any recently connected hardware and drivers. Disable or remove any newly installed software. If you need to use safe mode to remove or disable components. Restart your computer, press F8 to select advanced startup options, and then select Safe mode.

  Te3chnical information:

  STOP: 0X0000007F (0X00000008, 0XF794ED70, 0X00000000, 0X00000000)
  "

  If anyone can get me through a few stepsto try it would be greatly appreciated

  Hello

  You need to reinstall Windows with recovery disk (disk image hard F) or copy of Windows disk is the best solution in your case, fixing the problem will receive more time.

• Re: Satellite A100 and Win7 - screen is not appropriate in all of the screen

  Nice day

  I upgraded my Satellite A100-232 yesterday to Windows 7 32 bit. The installation went according to plan and installed everything perfectly. My problem I encounter is that the screen only covers 75% of the screen. The resolution is 800 x 600 and I changed it to 1024 x 768. Does the screen a little bigger, but still no connection in the entire screen.

  Can someone please help with this problem?

  Thanks in advance

  This model of laptop is supported for Win7?
  You have downloaded and installed the right driver?

  By the way: what A100 exactly do you have?

• Vista on Satellite A100 - peripheral unknown listed in Device Manager

  Hallo,

  I installed Vista on my Satellite A100-771. I also installed all the drivers downloaded from the Support from Toshiba site.
  But when they come out still - starting to Vista, a new hardware based message. I don't really know what material it is.

  There is an unknown device in Device Manager, and windows cannot find the driver for this device online.

  Can someone help me?
  Thank you very much!

  Hello

  may I ask what you´ve drivers downloaded? And about the new hardware based: did you check your device for the Device Manager?
  What is standing there as the device is not installed? Mass or multimedia storage? Please be more specific with your explanation and Don t forget the drivers in the list.

  THX

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• Problems with its Satellite A100 and professional cards

  Hi all

  I bought an A100 Satellite less than a year ago and have had problems with 2 different business cards when using Cubase.

  -M-Audio firewire solo plugged into the TI PCMCIA card
  -Echo Indigo io (PCMCIA card)

  I am running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, the sound stops for a few milliseconds.

  I've never had any problems with my old Toshiba laptop Satellite Pro A40. It's very disappointing and frustrating. I use my new Toshiba for the Internet!

  Could someone help?

  See you soon,.
  Fred

  Hello

  This has been discussed in several topics, so please visit the following positions and get something for yourself:

  This one has a driver and registry solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720

  But first, I recommend you to read this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18631

  It s long, so be prepared to read a lot. Hope you can solve your problem.

  Concerning