Satellite A100 good question - point yellow question mark in Device Manager

Similar Questions

• Code 31 Plug and Play software Drive enumerator no yellow exclamation mark in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me?

  You have Windows XP posted a group of win7?

  You need to reinstall / update your drivers for chipset motherboard, either from your PC manufacturers site if a big name PC fixed or portable, if a generic desktop computer, from your motherboard manufacturer.

  Your external problem * may be cured by the chipset driver

• Satellite A100-998: several question mark in Device Manager

  Hello.

  I hope someone can help me. I recently bought a 2nd hand A100-998. When I boot it I have several '' mark points '' on various points: Ethernet controller, mass storage controller, network controller, sm bus controller and video controller (vga compatiable).

  I also have a message once the machine starts who says: the ATI Control Panel could not initialize because no ATI driver is installed, or the ATI driver does not work correctly. The ATI Control Panel will now stop.

  The computer also says its new hardware found (all the controller ethernet etc.) but
  I have no disc driver for these and can't find.

  I think the problem is that my restore disk on a windows XP Home Edition, and it seems that the system must be windows media edition. Y at - there someone out there who knows what I can do or any other solution to solve this problem.

  Thank you.

  Hi David

  All this yellow question mark appear due to lack and not installed drivers.
  You must install all the drivers compatible and available, and you will get rid of all these issues.

  On the Toshiba driver page, you will find all drivers XP for PSAA9E A100. Your A100-998 is one of the PSAA9E series then visit the page of European driver of Toshiba and download all the available drivers and tools.

  In addition, you should take a look in the installation instructions document. This document tells you the right installation order!
  The order of installation of good pilots is important and necessary.

  Good luck

• Satellite Pro A120-145: yellow typical mark in Device Manager

  Hi all

  I have a Satellite Pro A120-145 running Win Xp Pro fully patched and updated, I have a yellow typical marks against "serial" in non-plug-and-play in Device Manager (when I click on view devices).

  Could someone tell me what driver is needed for this? I don't want to use the recovery disc I made a custom Setup to get rid of the excess baggage which is included on the disc.

  Thanks in advance.

  I used advanced search forum and found that Toshiba post document in some discussions of the forum.
  Please read this:
  How to identify an unknown device in Device Manager?
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Then, you can visit the page of the Toshiba driver and may download the driver for the unknown device.

• Satellite A60-S1591ST: yellow exclamation marks in Device Manager

  Hello

  Recently I formatted C: and installed XP Professional. But after installation, there are several problems.

  First of all, in Device Manager, there are large yellow markings at the SM BUS controller, video controller (VGA Compatible).

  How can I solve them?

  Secondly, when I scroll to the bottom of the sidebar screen to read or see some content down in a certain site, my screen is so sensitive and vague simultaneously with movement or the slamming of the scroll bar. It is associated with above features?

  My laptop is Toshiba Satellite A60-S1591ST, XP pro with SP2

  I do not know how to identify the model of motherboard

  Thanks in advance.

  Hello

  The problem can be solved very quickly the yellow exclamation point appears in the Device Manager, because you didn't install the necessary drivers.

  If you now ask for the driver ;) page Am I wrong?

  Well, it's a Toshiba laptop that so I think ;)
  See this page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Choose the Satellite A60-S1591ST and you should get all the drivers.

  Concerning

• Satellite A100-003: Questions on keyboard

  Two questions:

  1. What is the product of my keyboard type and computers laptop Toshiba have the same?

  2. can I have my extra keyboard buttons in a Linux system? (Ubuntu 7.10 Gutsy Gibbon)

  (1) the satellite A100 was equipped with a keyboard that supports 86 keys; 2 Windows keys and 1 shortcut key.
  Seems that the A100 series was equipped with this keyboard

  (2) I assume you mean the keys FN and Toshiba control buttons.
  Well, if you want to use these buttons, you will need a compatible driver from Toshiba.
  The fact is that Toshiba doesn't support Linux and doesn't provide drivers for Linux distribution. This is why you will not be able to use these keys running Linux.

  Good bye

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• Satellite A100 - 02K question

  I'm looking for a good replacement for my old Satellite 2100cds
  I don't think they are made of Japany more - can anyone confirm where the Satellites are made now?

  Hello

  It s a good question, because all machines, regardless of the manufacturer, who have more than 30 countries where are made for portable computers.
  I think you're now not being able to choose one in a specific country manufactured machine (such as Japan), because it s not overviewable.

  But the A100 would probably be a good substitute, it s a beautiful machine with a large screen and fast core, so Don t you make a mistake when buying it.
  You have questions? ;)

  Welcome them

  BTW. : maybe the A100 is manufactured in Japan, but who knows...

• Satellite A100-253 - question on the display, the sound and LAN drivers

  After getting a fresh installation (windows XP) on my Satellite A100-253, I thought that I needed the latest drivers. Apperently the drivers from the Toshiba site are obsolete or do any work.
  Here are my problems:

  -Display drivers is not installed at all. Instead, I installed the Catalyst drivers from another site but the resolution will not go higher then 1280 * 800, where my screen works better @ 1280 * 1024. Where can I get decent display drivers so I can put a normal resolution?
  -J' downloaded audio drivers on the Toshiba site but the sound is worse then it was. Where can I get the best drivers?
  -LAN (no WIFI) drivers on the Toshiba site seem to only have a uninstall.exe. Where can I get for my local network actual installation files?

  Thanks for the help in advance.

  Born the

  Hello!

  1. drivers you can get on the site of Toshiba or live production.
  Where did you download the drivers?
  Maybe a BIOS update will solve the problem.

  2. it of the same as point 1; Toshiba or directly to manufacturing.
  But don t forget a notebook is not an entertainment system, and if you want high quality sound you need external speakers.

  3. this package contains the actual installation files, but you must install them manually. This may make you in the device, right click on LAN card Manager and update the driver.

  Good bye

• Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

  I used Toshiba Satellite A100 PSAARA, now I have a few questions:

  1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
  I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

  2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

  3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
  So: can I upgrade my card graph and maximum card that I can use?

  4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

  Thanks for your help!

  1. try to load the default settings in the BIOS. Then it should work.

  2. the Satellite A100 supports 4 GB max.

  3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

  4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

• Yellow question mark on devices in Device Manager

  Original title: Please help. In Device Manager / other devices/Multimedia Audio Controller, there is a yellow question mark. What is this please?

  In the devices under other devices, the multimedia audio controller Manager, there is a yellow question mark. What is this please?
  Everything seems to work as far as I know. Thank you very much. Afzal.

  Hi amal.
   
  A question mark '? ' in Device Manager means that a compatible driver for this device is installed, indicating the possibility that all the features are not available.
   
  This article provides steps that you can use to troubleshoot hardware configuration by using the Device Manager.
   
  For more information, see:

  Troubleshooting of conflict of devices with Device Manager

   

  Also, see this article for additional troubleshooting steps:
  How to manage devices in Windows XP

• Satellite A100-529 - Question about upgrading CPU

  Hello.

  I have laptop Toshiba Satellite A100-529 and I want to change my Celeron M 380 for something better, but I don't know what the CPU can insert to this computer.

  When I was looking for similar templates I got same CPU with the same chipset. I don't know how to take apart my Toshiba CPU and change, I also have the latest BIOS.

  Technical details are in links with screenshots.
  What the best processor I can use on this computer?

  Thank you very much.

  [Screenshots | http://img694.imageshack.us/g/cpuzc.jpg/]

  Hello

  As Akuma already written, you can choose a CPU of the other models. Look on the lower side to identify your model number.

  But don t forget that the CPU upgrade is risky. No one has tested this before CPU in your laptop and my cause overheating or something else. This upgrade is official not supported: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Satellite A100-003: Question about RAM and recording model number

  Dear Sir/Madam,

  1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

  2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

  http://img510.imageshack.us/my.php?image=satellitea100003xg4.jpg

  I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

  Thank you for helping me,
  Halin

  Hello

  First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
  Don t worry, register just she.

  With regard to the RAM:

  Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

  In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
  CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

  I hope I could explain something to you. ;)

  Have a nice weekend

• CD-Rom and display on the Satellite A100-237 questions

  One of you using this model of satellite in the face of problems with their CD device in reading, because in many cases, he doesn t even read CDs, although they are all new and untouched sometimes.

  My second problem is with the screen. I had my settings of the screen switch power after 10 minutes of no use, what happens is that it turns off but can't not perceive actually new without go to stand by mode that is moving the mouse or pressing the buttons doesn t work. Please help me on this if you can.

  Regarding the post about the framing of the screen, I had the same problem when I got this laptop but I traded immediately after you run the msconfig utility and confirmed that something is wrong with the graphics card.

  Hello! I have too A100-237.

  I have no problem with DVD player (although I n t use it a lot), but it must depend on what model you have, I have Pioneer, but I know someone who has one * mast (list of readers as possible is in the manual, apparently depends on which model is available at the factory during Assembly).

  I have the wide screen of problem too. I had no such problems for awhile, I have normally moved the mouse or based on what that either and he immediately turned his back, but a few days ago the same thing happened to me (and since that always happens) - no response after pressing key or move the mouse, I am using Fn + F3 to suspend-to-ram and turn it on then...

  --------------

  The dithering problem - do you mean that you got the phone replaced and a new is not the problem of dithering? If Yes, can you please check the version of the BIOS?

  What did you do in the msconfig?

• questions about the exclamation points in a triangle in Device Manager

  I went to my device manager to see if there are problems in all areas of the computer, because when I try to log on to a Web site that normally allow me to access it, it gives me a 404 error message. So when I went to the Manager of devices the only thing that I could see and which was not fair has this exclamation point in triangle and it was yellow next to Teredo Tunneling Pseudo Interface. When I double clicked on it that's what he told me: "this device cannot start code 10". I checked because he had run a driver update solutions check on it and came back with her has been updated.

  We can help with your device error, but it will not fix the website.  A 404 message from the server, tell you that the Web page you have requested no longer exists (or has never existed).  Nothing you can do can correct an error 404 - only Web site builders can fix it.

  On your device, the Teredo Tunneling Pseudo Interface you mentioned is an interface to communicate on different versions of the TCP/IP protocol.  You can learn more here: http://en.wikipedia.org/wiki/Teredo_tunneling