Satellite A100 - how to recover?

Similar Questions

• Can satellite A100-999 - I recover the HDD password?

  Hi all

  I had a virus, so I formatted my computer, a Satellite A100-999. After I did, I was going to install Windows Vista, but I never could, because they ask my HDD password and I don't know what password it is that, I don't see it anywhere. My computer has been installed in the store, I only have a bootable disc, they gave me.

  My question is: How can I recover my HDD password? Is it possible? I can boot the system in any other way?

  Thank you!

  Sara

  It of not possible recovery or removes the HARD drive password. An ASP peut t for this too.

  Sorry, but in this case, you need a new HARD drive. There's no other way.

• Satellite A100: How do I enable SATA NATIVE mode

  Hello, my laptop Satellite A100 PSAA9 and the southbridge is an ICH7M
  I put an SSD in my laptop and the drive controller is locked-> Ultra DMA 6 IDE compatible mode.
  I would switch to the native SATA-1 to increase the bandwidth (from 110 MB/s-150), but I can't find any setting so that, in the last BIOS 6.00

  I think that maybe in the past, Toshiba has enable this feature, but I suppose they might have turned it off for beginners who don't know how to install the SATA drivers during the installation of Windows.

  I found Toshiba BIOS database, but it is locked by a password.
  I'm willing to test any BIOS that could re - enable native SATA mode

  + The message was edited: link has been removed - unauthorized +.

  Hello

  You need the native SATA controller?

  The laptop was equipped with a controller SATA interface supports the Serial ATA Rev. 1. 0a.

  Some laptop models take a BIOS that contains a SATA mode option.
  This option can be changed on AHCI or in compatibility mode.

  But as far as I know a100 BIOS does not contain these settings

• Satellite A100 - how to turn on the Bluetooth radio?

  Hi, I have a Satellite A100, and I would like to know how to turn on the bluetooth radio. I'd appreciate any help on this.

  Hello

  First that you check if your laptop was equipped by BT module.
  If so, check if the BT stack is installed correctly.
  If Yes, then you should be able to turn on the BT using the FN + F8 key combination

  Good bye

• Satellite A100: How to connect to wireless internet

  I am a user of portable Virgin and will take my Toshiba Satellite A100 when I go to Portugal for 1 year.

  Please can someone advise how I can get internet connection Wi - Fi while I'm away.

  Thank you

  Hi Jane

  To connect the laptop to the wireless LAN, you need to first configure the WLan router.
  Each WLan router manufacturing provides a statement of installation and configuration.

  After configuring the WLan router, you must activate the WiFi card on laptop you.
  Turn on the WLan switch and use the FN + F8 key combination.

  Then, you must use either software 3rd party WLAN client configuration like the Intel Proset utility or you will use the own Windows OS option for the WLan connection.

  Detailed advice, you will find in this category of the forum or the internet. Google simply

• Satellite A100 - how to install "Windows XP MCE" on a new HARD drive?

  I have a laptop Satellite A100-495. the cd/dvd does not work and I have a new hard drive. Now, I want to install the original os (windows xp professional, mce).
  I'm trying to put the files of my original restore on a USB cd but never works and I did not find useful clues in any part of the forum.

  Is there anyone out there who can help me?

  Hi, marawe

  It would never work if you just copy the files from recovery Cd on a usb key. You need to make a BOOTABLE FLASH DISK, to do you need an application like Flashbot... Google.
  Download and install it, after that you can make a bootable usb key.
  You should know that your Bios must support boot with a Usb key, I don't know about your knees. Otherwise, you cannot do so. Hope it works

  Welcome them

• Satellite A100: How to use the IrDA port with cell phone?

  I have a laptop with an infrared port that I can use with another computer.
  Now, I have a problem with my laptop at home, A100 series.
  I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
  If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

  I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
  What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

  Thank you
  Petri

  Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
  What cell phone do you have exactly? Satellite A100-xxx

  IrDA option appears in the control panel?

• Satellite U - How to recover deleted files from mysafe?

  Hello

  Does anyone know how to recover deleted files from mysafe?

  I'm not 100% sure but I think that the data in this folder will not be deleted to bin recycled initially, but they will be removed immediately.
  How recovery them? Good question?

  Try to find some third party applications that can scan the HARD disk for deleted files. The point is that it will work if the FAT (File allocation table) is deleted only. This means that the file is on the HARD disk, but the disk HARD doesn t know where exactly.
  Hmmm... It is not so easy.

• Satellite C660 - how to recover to factory State?

  I would like to recover my Toshiba Satellite C660 to its original state.

  I haven't created the DVD at startup.

  There is a 11FR folder called HDDrecovery on the D: partition.

  When I press F8 at startup, I don't see any possibility to use.

  does anyone know how can I get it back? The option circled in red is not available.

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R0102134.PNG

  Hi mate

  Check if this could help you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=228171

  There is a description of how to make a bootable USB key.
  Optionally, you can copy the contents of the folder HDDrecovery on USB and this could create a primer.

  Please post if this helped!

• Satellite P755 - how to recover user data from recovery

  I used Toshiba Recovery Wizard, but with save data option c:\Users[user-name]\Music\iTunes\iTunes. Now how can I recover?

  Now it is recovered, but I need to find my data!

  During the process of recovery of the disk HARD will be formatted and all will be set to the same State as on the first day of purchase...
  That is why I fear that your data could be lost if you have not created a backup in the past.

• Satellite L850D - how to recover Windows 8?

  Hello guys.

  I had virus problems with my Toshiba Satellite L850D and decided to restore the factory settings.

  During the recovery, it crashed while I held the power button and when I started it again, it seemed that windows 8 had been removed.

  I took the laptop to a local computer repair company that could not recover my windows 8 and windows 7 installed on it.

  I paid around £80 extra when you purchase the laptop for windows 8 already installed on it and I was just wondering if there was anyway to get it back?

  Thanks for the help

  If you have not created recovery disks in the past, then you have no choice as to the order of these discs from here: http://backupmedia.toshiba.eu/landing.aspx

• Satellite L300D - how to recover Vista without losing a data partition?

  Satellite L300D - 22K
  Code: PSLC8E-05500CCE
  Vista Windows (Home premium)

  HARD drive has two partitions (visible):
  -C: (Vista)
  -D: (data)

  After installing avast antivirus startup takes 20 minutes (corrupt file?, defective HARD drive?)
  Moved all my personal archives to the D: partition
  Don't know if I can create bootable recovery dvd´s (the system is unstable)

  1 * I´d would like to reinstall vista without format partition D * (where are my data)
  Find this guide for the HARD drive recovery process
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  Should what steps I follow?

  2 If the HARD disk is defective, how can I re - install supplied OS (vista) for a new HARD drive?

  can 3 not related to the above, I upgrade to Windows 7 (clean install)
  32 or 64 bit?

  Hello

  I'll try to help you.
  1 > I´d would like to reinstall vista without format the D partition (where are my data)
  > Find this guide for the HARD drive recovery process
  > http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  > What steps should I follow?
  As far as I know on the second partition of HARD drive folder HDDRecovery is saved recovery image. When you start the installation of (F8 at startup) HARD disk recovery partition recovery image D will be installed on the C partition. In this case the D partition is not deleted. C just partition will be formatted before installation of recovery image begins.
  Just use F8 option and go fix my computer. Just follow the on-screen menu and choose the software factory default recovery option.
  > 2 If the disc is defective, how do I re - install supplied OS (vista) for a new HARD drive?
  After reading this question, I see you didn't read the document s user manuals. You need to create a recovery media (DVD recovery) and this recovery DVD you can use for recovery image installation if there is a problem with the HARD drive or you want to install original recovery image on the new HARD drive.
  3 > unrelated meanings, can I upgrade to Windows 7 (clean install) 32 or 64 bit version?
  Of course you can do it. Please visit the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and check if all the drivers, tools and utilities are available here. Of course before doing this, create recovery DVDs.

  If you have any other questions you are welcome.

• Satellite A100 - how to reinstall XP?

  My laptop was not supplied with a copy of Windows. As a result of various performance problems, I was informed that a reinstall of XP would be the best way to go. Is it possible that the resettlement files are hidden on my hard drive, as implied by this article on pcworld.com http://www.pcworld.com/article/129977/how_to_reinstall_windows_xp.html?

  My laptop is a Satellite A - 100 running Windows XP Media Center. I have access to XP disks but would of course prefer to clean my system with the software that Toshiba had intend me runs, if possible.

  Installing XP is very easy.
  Put the disc in the drive and the start of this drive.

  How to start? :
  Turn on the laptop press F12, new start menu should appear and choose here ODD (CD/DVD drive)
  The Win XP installation should start, then you will see the HARD drive and partitions created on the HARD drive. It s advisable to format the partition where the BONE at the beginning has been installed.
  Format, and launch the installation of Win XP on this partition.

  That's it... Wait for windows XP installation is finished and restart the laptop.

  Toshiba drivers are located on the above mentioned page!

• Re: Satellite A500 - how to recover data from sandisk

  Hello

  I HAVE A LAPTOP SATELLITE A500.
  EVERYTHING NEW IN THE LAPTOP WORLD AND DISAPPOINTED THAT MY COMPUTER OLD SIX MONTHS MUST HAVE HARD DRIVE REPAIR.

  MY QUESTION IS:
  I HAD TO RECORD SOME PROGRAMS SUCH AS MY I TUNES LIBRARY AND SON GAMES ETC ON MY SANDISK.
  I HAVE NOW PUT THE DATA IN A FOLDER IN MY DOCUMENTS, BUT CANNOT WORK OUT HOW TO RELOAD THESE PROGRAMS IN THE FOLDER.

  ANY HELP WOULD BE GREAT.

  Thank you

  Hello

  I guess that you have copied the unique demands that have been placed in the C:\Programs Files folder on the SD card. Is this good?

  Well, usually it of not possible to copy these programs again, and then to start
  The point is that this will not work because these programs must be installed first on the HARD drive.

  You can copy only a few files to stand alone as file mp3, movies, photos, data files, but you cannot copy (copy and past) software

• Satellite A100 - How can I fix the Power Saver error at startup?

  Hello!! friends

  Can someone help me? I have Toshiba Satallite A100 series with XP SP3 at start up I get an error for maybe 2 weeks ago. My mistake: a fatel error occurred this program will terminate code: oxo (Tosheba energy saving)

  How can I fix this error on my laptop?

  Thx a lot in advance

  BR
  Farman

  Hello!

  I think you should try to reinstall Toshiba Power Saver. The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version, delete the old version in Control Panel. Then, restart the computer and install the latest version on the Toshiba site you downloaded.

  Good bye