Satellite A100 keeps freezing after a short period
Hi, I wonder if anyone can help.
I have a Satellite A100 laptop. The laptop starts without any problem. However, after a short period of time the system crashes and I have to reboot the machine.
I am running Windows XP Home Edition. I tried to reinstall a new copy of windows XP Edition family. However, the laptop continues to freeze when I try to do something.
Although the real time, it takes before it freezes changes each time.
I have two 512 MB RAM chips, and I thought it was a fault memory. So I took each chip out, leaving the other chip in. It makes no difference, the machine hangs with either chip.
Help, please. I would like to hear from anyone who might suggest what's not here.
Thanks in advance
Maybe the temperature inside the laptop could be the reason of this gel.
I had once similar there is question. My frizzy 6 specifications because the temperature affected the memory modules.
So I cleaned the cooling fans using a jet of compressed air and I replaced the thermal grease which is a space between the cooling module and CPU. This helped...
You can try to clean the cooling also fans. But be careful and if you have no experience, then a mobile technician should help you.
Good luck
Tags: Toshiba
Similar Questions
-
Portege R600-10 q keeps freezing after a short period of use
Hi I have a Portege R600-10, q,
It keeps freezing after a short period of use - although if I leave it for a few minutes, sometimes it can be useful.
If it is turned on for long enough, it will display a blank screen and the fans will turn on very hard.I cleaned ports ventilation and re-glued the CPU, and it did not make a difference.
I ran HDD and memory (mhdd/memtest) diagnostics, and they have all done.
I reinstalled Windows (from the OEM disc) and I still see the same question.
Anyone have any ideas on how to solve this problem?
Thank youHello
Have you noticed that when running special software or apps?
I can tell you that a memtest does not always provide a good result
Even if the memtest said there is no problem with memory, RAM modules could malfunctionOtherwise, it may be a motherboard problem, but this is just speculation
-
Satellite A100 - keeps freezing and crashing
Hello
I've got a 2.5 years old Satellite A100. He was going well until recently, when I found that the pc freezes completely - this looks only happen when I move the cursor on the screen. The only thing I can do, it's a hard re-boot.
The problem has become more common, and I had to reinstall the operating system (using the disc that came with the laptop). After you have reinstalled everything worked well. But all of a sudden the same problem reappeared. I thought maybe it was different software clash between them and so I once again re-formatted the hard drive and reinstalled the operating system.
This time it froze once more as I move the mouse around the screen. But it's happened before that I had installed anything on the PC. It is an entirely new installation.I also want to mention that this problem occurred first a year ago. At that time I had to wipe the hard drive and reinstall the OS and it worked fine until about 2 weeks ago, when I've updated my "spybot search & destroy ' software." It was after this the problem started again. The rest of the story is as above.
Just to mention that, after that the problem started 2 weeks ago, I reinstall the mouse driver using the touchpad driver that is available on the Web from Toshiba site.
Please help - I have been re - install the OS on / off power for 2 weeks now and I still have the problem. I am close to giong out and buy a new PC!
Hello
It's strange, and I think it looks like a hardware issue because you used the disk recovery Toshiba and after that, the same problem occurs.
But it's not easy to say what causes this problem. You can check the RAM and HARD drive using Drive Fitness Test and Memtest86. Use Google to find the two programs. You can download an image bootable in these two programs. You must burn it to a CD and boot from it.
If the peut t-tests is a mistake your laptop should be checked by a technician for laptop.Maybe you can find the problem yourself, and to swap the RAM or HARD drive, it's pretty easy.
Welcome them
-
Previous versions worked correctly and also IE works allright. My laptop running Windows 7, 32 bit.
Hello, it seems to be an nvidia driver involved in the accident. Please update your video driver or try disabling hardware acceleration in firefox > options > advanced > general.
-
Hello
A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?
Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!
I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.
You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.
Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.
Have you tried running in Safe Mode?
Did you do a BIOS reset?
Have you tried to do a disk defragment?
Have you tried to do a Disk Cleanup?
Please try to clean the events your Noteobok MNI
Is the noisy fan or turn constantly?
Is the hotter than normal PC?
Have you tried tests to hardware failures?
Here are a few documents for you that can help:
- Computer hangs or freezes
- Set the slow system performance.
- Reduce the heat inside the PC to avoid overheating
If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!
If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.
Thanks for joining in!
Have a wonderful day!
-
Pavilion dv2000 laptop computer under Win 7, slows down or freezes for a short period.
My Pavilion dv2000 running Win 7, slows down or freezes for a short period of time where, what seems to be, a talk-show audio plays. Someone knows how to turn off tv and audio if you use no background.
I solved the problellm. After stripping the system of all the games and all other third party software, I discovered that the problem would occur when connected my net. If I started and did not attach the net audio problem has not occure. It turns out that one of the files system temp to explore has been altered by a virus which, down, loaded each time that the system connected to the net. Problem showed when testing the hard drive. Ran the disk check which fixed the corrupt files, then reinstalled win 7 and other necessary software. All right.
-
Satellite A100 psaa9e beeps after BIOS update
Hi all!
My pc is a Satellite A100 psaa9e and after that the Bios updated Bios say 'no tmp or tmp has failed. "
I have try this procedure (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36186&tstart=0) and my pc does not restart automatically.
He finishes the beep continuous beep, a low beep and two normal beep, and * didn't do anything that I have not reset! *._FLOPPY LEADER: _
the diskette is 1.44 m
MINIDOS on the diskette. SYS PHLASH16. EXE BIOS. PHLASH WPH. INI
the BIOS. WPH is version BIOS of San Antonio s10gm590.rom (5.90) http://support1.toshiba-tro.de/tedd-files2/0/bios-20070709111839.zip
the PHLASH. INI file contains the following:
[UI]
Advanced = 1[Hand]
RetryCount = 3
UpdateMode = 3
FormatVersion = 2
UpdateFlags = 802880
UserFlags = 802080
UserMask = d121a4
PSIFlags = 8000080
UserMode = ffffffff
BackupFile =
ImageFile =Please help me!
In my opinion, the ROM module where the BIOS is stored has been damaged or has been flashed properly.
In your case, I recommend you contact the ASP technician and ask guys processional flashing the BIOS. -
WVC80N hangs or stops working after a short period of time
Hey there,
I created my WVC80N yesterday. Went to a couple came back, he was frozen, no new video. He did this ever nonstop. I had to reboot the computer to make it work again. Obviously a big problem, but one that I hope there is a fix for or can I do something wrong.
I use win 7 and tried both the software supplied with the cam and webcam xp5, they both lose the connection with the cam after a short period of time.
Thanks for any help on this one,
CR
@crjb1, have you got it working under Linux? I tried for about a week without result. I noticed that Linksys-Cisco offers a GPL had driver/module for the wvc54gc, but not for the wvc80n. Maybe I would have thought a little before you get all excited and buying this.
The video quality when connecting to the web server of the camera is fine, but I can't get a stream using zoneminder video or else and the RTSP protocol feed doesn't seem to work at all.
-
Vista home basic sreen turns black after a short period after start-up
Vista home basic sreen goes black after a short period after start-up and then later after that stop he returned after starting, and then did the same thing
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Laptop keeps freezing after starting
My laptop (HP pavilion tx2500) keeps freezing after the start, there is no error message warning that the thing just crashes without warning moments after startup, someone had this problem and know how to solve this problem.
It could be a number of things, then we should try to eliminate some. Try to enter the HP utilities but endearing running tests of disk and tape on the F10 key, I think and hard memory. Try to run Notepad without the battery installed and just the power adapter. Try to use one piece of memory and try the two slots. Then try the other room and try the two slots. If you don't have that one piece of memory, at least try the other location. Try a hard reset:
http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01684768&product=1132551
-
My desktop icons will not run after a short period of time, with a reboot.
My destop icons will not run after a short period of time, with a reboot
Hello
When did start to happening?
You did any changes made to your PC?
What HP PC model and operating system are you using?
-
Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?
Sounds like a conflict. What else is in course, including plugins ID third-party programs or utilities that run in the background on the Mac?
Also, have you tested in a new user?
-
Satellite A100-002 - freezes when installing Windows 7
Hello
I have 1. Satellite A100-002 and 2. big problem with the installation of Windows 7.
2 years ago I tried to install Wista - but it froze during installation, whenever I tried. of course, I tried different versions of Wista.
Once I managed with installation - but he keep gel al the time - immediately after departure.
so I gave up - and I'm back to XPnow I'm trying to install Windows 7 and again the same problems :(
can someone tell me whats wrong? -a really need him.
Thank you very much
Hello
When the laptop just hangs?
In addition you using SATA drivers or install it in compatibility mode?
-
Satellite A100-233 - freezes during the update of the BIOS
I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zipOS: Windows XP Pro SP3
And when I tried the BIOS update and load the new BIOS: ok
Analyze the compatibility of old and new BIOS: ok
Read old BIOSES: ok
Save the old BIOS to the backup file: ok
New Flash start cant BIOS and 1-2 min after the gel cellI solved.
but really not funny...
If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...
Post edited by: jadefox
Hello
I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.
On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
http://EU.computers.Toshiba-Europe.com > support & downloadsWelcome them
-
Satellite P500-F12 - freezes after 5 minutes of game
I recently bought a toshiba laptop P500-12F with the specifications below, the problem I have is that whenever I try to start a game like mount and blade or empire total war, the game works for between 5-10 minutes, but then crashes completely and the cell starts producing a strong buzz. The only way out of this is to press the power button until it stops. I don't get the problem with something else that this type of games and I don't know why it does this, any help or adivce would be welcome.
Bradders.
Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
Language: English (regional setting: English)
System manufacturer: TOSHIBA
System model: SATELLITE P500
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: Intel (r) Core (TM) 2 Duo P8700 of CPU 2.53 GHz (2 CPUs), ~2.5GHz
Memory: 4096 MB RAM
Available OS memory: 4060 MB RAM
Page file: 1641MB used, 6478 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11Card name: NVIDIA GeForce GT 230 M
Manufacturer: NVIDIA
Track type: GeForce GT 230 M
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0A28 & SUBSYS_FF501179 & REV_A2
Memory display: 2781 MB
Dedicated memory: 1007 MB
Shared memory: 1774 MB
Current mode: 1680 x 945 (32 bit) (60 Hz)Post edited by: Bradders_1
Hello
The forum already contains these discussions where notebooks will freeze after 5 or 10 minutes of play. Have you read them?
Now it s not easy to say what causes this problem but first of all you need to install the latest driver of Toshiba display. Don t use non-Toshiba drivers, as they can cause the overheating!
Also make sure that you use the latest version of the BIOS and it s useful to clean the laptop time using a jet of compressed air.
Maybe you are looking for
-
HP Mini 110-1125NR: Bios password removal
I have a HP Mini 110-1125NR that is bios model locked. Can anyone provide a way to remove this password? The code returned after that 3 bad tests is CNU-94150PX
-
Indexing for loop while seizing the unique values in table
Hi all I have another question. Overall, I have a table and I want to take each element of this array. My thoughts of how do are the following: I use a loop for the indexing of my table. Then I create a local variable outside of the loop in order to
-
Original email and password have been compromised, unable to reconnect
Original email and password have been compromised. Tried the new password and I forgot. Have you tried several other ID and password combos since nothing will do. I'm trying to fix my original contact list * original title - Original email and pas
-
Trying to move from XP to Vista Ultimate. During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue. Can someon
-
Reset the library in Windows Media Center on Vista Ultimate
Any way to reset Media Center, so it restores the library of images, video and audio? I need to start all over again because it won't let me control my own destiny. Media Center has found all kinds of stuff on my readers that I don't want to appear