WVC80N hangs or stops working after a short period of time

Similar Questions

• Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Sounds like a conflict. What else is in course, including plugins ID third-party programs or utilities that run in the background on the Mac?

  Also, have you tested in a new user?

• Older games, General Pacific stops working after a short period

  I downloaded and installed general Pacific, I had to use the properties to change the compatibility mode.

  I finally got to work without graphics scrambled / blurry, but after about 5-10 minutes the game stops working.

  and does the same thing whenever I try to play,

  Can you please help?

  Hello

  ·         Have you made changes on the computer before this problem?

  ·         What operating system is installed on the computer?

  I suggest you put the computer in a clean boot state, and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Flash stops working after a certain period of time (not standard issue)

  OK, here I am with this problem once again, the first time it really made me reinstall the whole OS (it's so EVIL), and now he's back. Not that I really want to waste time looking for what is impossible to find, but I really want to reinstall the whole thing again. Here goes:

  (1) it happens in Firefox ONLY. Other browsers are not affected by that issue.
  (2) it happens in any version of Firefox, old/new - no difference. It can go all the way back to 9 even, I tried quite a few people.
  (3) Yes, I have reinstall Firefox several times (with preliminary complete uninstall using Revo Uninstaller)
  (4) Yes, I have reinstall Flash number countless times, and no, it doesn't matter what version of flash, it is, just as with the browser. All the same.
  (5) Yes, I checked the PC for any possible malware using several different anti-malware applications. Nothing. Clean.
  (6) I checked the event viewer, no message here... just nothing.

  What happens is, that it simply stops play ANY flash after some time. Animation, video... whatever. It is therefore not specific thing of youtube. When on youtube I just get the black frame and an annoying flashing / pending tab in the taskbar. That's right, stuck in a cycle. If I restart the browser it is all back to normal. But a little later (I don't know when exactly, about 15 minutes later maybe) he goes back into the glitch. Since my last reinstallation (which is due to this prob), he was for some time without any problems. But now he's back, so instead of reinstalling everything I just want to know: what THE HELL is this shit? It really pisses me now. And no, I don't want to use a different browser, I need Mozilla.

  I'm glad that you seem to have solved the problem.
  I mark the answer to the solution of thread computer expert, as has the connection of protected mode.

  The safe_mode of the Flash Player seems to be involved in more than one problem.

  I know that Firefox Aurora channel a reporter new and experimental, which deals with the Flash crashes and hangs. At the present time, we tend not to be able to get to the bottom of a large number of these issues.

• HP ENVY 15-j023cl Notebook PC: PC off (supposed overheating, no message appears) after a short period of time

  Hello

  A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?

  Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!

  I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.

  You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.

  Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.

  Have you tried running in Safe Mode?

  Did you do a BIOS reset?

  Have you tried to do a disk defragment?

  Have you tried to do a Disk Cleanup?

  Please try to clean the events your Noteobok MNI

  Is the noisy fan or turn constantly?

  Is the hotter than normal PC?

  Have you tried tests to hardware failures?

  Here are a few documents for you that can help:

  • Computer hangs or freezes
  • Set the slow system performance.
  • Reduce the heat inside the PC to avoid overheating

  If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!

  If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.

  Thanks for joining in!

  Have a wonderful day!

• My desktop icons will not run after a short period of time, with a reboot.

  My destop icons will not run after a short period of time, with a reboot

  Hello

  When did start to happening?

  You did any changes made to your PC?

  What HP PC model and operating system are you using?

• Recycle Bin empty automatically after a short period of time

  original title: Recycle Bin emptying

  I'm running Windows 7 on my laptop Inspiron 15 and myrecycle bin dumps of my files.  She has a short period of time (I did not understand exactly how long).  There I want to change the settings so that the files remain here until I have decide to delete.  I can't find the setting that would allow me to do.  I tried right-clicking bin recycle and see no settings icon?

  Hello

  Change the Recycle Bin settings
  http://Windows.Microsoft.com/en-us/Windows7/change-the-Recycle-Bin-settings

  You have Norton, McAfee or other 3rd party utilities that affect to the trash.

  I hope this helps.

• Software stop working after the subscription period

  If I pay for a 1 year subscription, at the end of this year if I decide not to renew, the software stops just get updates or it stops working completely?

  Thank you

  It stops working.

• Troubleshooting Guide: Audio does not work after a Certain period of time

  Hi all

  Thank you for choosing the HP Forums!

  If your sound recently stopped working on Windows 8.x or Windows Server 2012 and you suspect an update of Windows is involved, then look like! This is the troubleshooting guide that will explain how to solve the problem!

  Explanation:

  Currently, there is a Windows update that may cause the sound on your computer to stop working. The update is KB2962407, and it is now an "Important" update This means that it will be installed by Windows Update unless hide you it.

  This thread also covers generic sound troubleshooting which can solve the problems of "no sound".

  Before the update itself, since an update of Windows cannot be the culprit, there are a few troubleshooting can be done.

  A round of troubleshooting:

  1. run the Audio Troubleshooting in Windows 8 may solve the problem. It does not contain the possibility of eliminating any parameter that affects sound. Here are some steps on how to perform this troubleshooting:

  (a) hold down the key "Windows" and "R" and type "Troubleshooting" and then press ENTER.

  (b) a window will open. On the left, click on "Show all", then "Audio playback".

  (c) click on 'Advanced' and run it as an administrator. Then click on 'Next' to complete the process.

  2 try to create a new user account. The changes forced by the update that is likely to affect only a single user. This HP document shows you how to create a new user in the section "creating a new account in Windows 8": users and connections (Windows 8) account management

  3. try a pair of headphones or external speakers. This is set by the whole issue if the sound does not work via an output of second or third device.

  4. an alternative is to uninstall the driver manually and then force to be installed again:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "Uninstall".

  (c) restart the computer. This will force the material to write a new driver at startup.

  5. Finally, to ensure that the remaining steps that you have not tried this document are tempted: no sound from speakers (Windows 8)

  New inclusions:

  Deactivating and activating the audio driver has been tested with success results enough for me to post here. Here are the instructions to do this:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "disable."

  (c) wait a minute, then right-click on it and select 'enable '.

  Also, the restoration of the system is also a valid troubleshooting step. This will return the computer to a point before the update or an external source of the issue has occurred. Here is a document on how to perform a system restore: System Restore

  If you want something strong, an update of Windows completely refreshes Windows 8, without affecting the files: refresh your PC to solve problems (Windows 8)

  Also, this is a sound of Windows troubleshooting tutorial. Just out of curiosity, I've recreated the problem on a Windows 8 and went through this tutorial. He has been able to solve the problem: no sound in Windows

  *Everything in italics is currently untested, but will be tested as soon as possible. I believe that these steps will help:

  In the search bar, type "services.msc" and press ENTER.

  Hold down the 'Windows' and 'R '. Type "services.msc" and press ENTER. Look for the following services:

  -Audio service

  -Windows audio

  -Windows Audio endpoint Builder

  I want you right click on each of these services and select "Stop". When they all stopped, right-click on each other again and select 'start '. So, make sure that the status of each service is "started" and their startup type is "Automatic".

  Troubleshooting of the update:

  At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407. Please note that the following troubleshooting is ONLY a workaround, for now and should be done only if the computer has installed this update.

  First of all, you can try the hotfix package content in this document from Microsoft, specifically at the KB2962407 address: RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014

  If that doesn't help, then uninstall the update of Windows and then hide it, are the only way to eliminate the question if she caused by this update. Here is the procedure to uninstall the update:

  1. go in Control Panel, then click on "programs and features".

  2. click on "view installed updates". Look for the update with ID KB2962407.

  3. right click on the update and select "Uninstall". Restart the computer.

  Then, here is the procedure in order to hide the update:

  1. go in Control Panel, then click on "Windows Updates".

  2. click on ' Check for Updates '. When the process is complete, is expected to find important updates available. By clicking on the message will open a window where is the important updates.

  3. right click on the KB2962407 update and select "Hide update". This will prevent the installation update next time that Windows updates are installed.

  Conclusion:

  At the end of this guide, you will have the sound works again (assuming that the cause was the update of Windows, or the less focused on the software). Please let me know if you have any questions or concerns. Thank you!

  Mario

  I worked on behalf of HP.

  @Charlton26 ,

  As @vhawk1 recommended, please give my long post suddenly. You should have a positive resolution when you are finished. These steps are tested and solve the problem

  And @vhawk1 , thanks for getting the word

  Mario

• My mouse wheel stops working after a few minutes, each time I load Firefox. I searched through various corrections, but none of them have worked for me. Help!

  I have a Lenovo desktop and mice. I did not have this problem with other programs.

  Something strange, that.

  Please report your last post as solved while others will know.

• Backlight LCD turns off after a short period of time

  The LCD backlight on my Dell Inspiron 8600 turns off about 10 to 15 seconds after the start, or by turning on during mode 'sleep'. Windows is visible if reflected on screen so LCD light is seems to work. I've read the other posts that indicate that this is perhaps a problem with the inverter Board or the lamp LCD. Everything happens when running Dell diagnostics CD.

  Does anyone have any ideas if it is the inverter Board or lamp LCD or something else causing this problem?

  Thank you

  
  

• Satellite A100 keeps freezing after a short period

  Hi, I wonder if anyone can help.

  I have a Satellite A100 laptop. The laptop starts without any problem. However, after a short period of time the system crashes and I have to reboot the machine.

  I am running Windows XP Home Edition. I tried to reinstall a new copy of windows XP Edition family. However, the laptop continues to freeze when I try to do something.

  Although the real time, it takes before it freezes changes each time.

  I have two 512 MB RAM chips, and I thought it was a fault memory. So I took each chip out, leaving the other chip in. It makes no difference, the machine hangs with either chip.

  Help, please. I would like to hear from anyone who might suggest what's not here.

  Thanks in advance

  Maybe the temperature inside the laptop could be the reason of this gel.
  I had once similar there is question. My frizzy 6 specifications because the temperature affected the memory modules.
  So I cleaned the cooling fans using a jet of compressed air and I replaced the thermal grease which is a space between the cooling module and CPU. This helped...

  You can try to clean the cooling also fans. But be careful and if you have no experience, then a mobile technician should help you.

  Good luck

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.