Satellite A100 PSAA8K stuck in the BIOS after that the BIOS is flashed

Hi all

I used the utility to update the BIOS of Toshiba on this machine. It was working fine before, now it is blocked with the Toshiba Startup logo. Pressing F2 or F12 don't work. Pressing ESC. Gives the following error. No TPM or TPM has problem. Everything else seems as usual. It shows the BIOS 6.00, which is what I had in theory flashed to.

I guess the flash gone bad. Is there a disaster for this recovery procedure?

Hi guys

It seems really turned something went wrong during the BIOS update process.
Perhaps a new module ROM BIOS flashing could solve this problem.

The point is that you need a BIOS version of special rescue and the drive to reflash the module ROM.
But only the authorized service provider has such special rescue tool and only the ASP technician can reflash the BIOS.

So maybe it's not a real solution but a tip how to get a solution
I would recommend so contact the ASP in your country for the control of the laptop and a reflash BIOS.

Best regards & good luck

Tags: Toshiba

Similar Questions

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Satellite A100-178 hangs at the STATION after the BIOS update

    Hello

    Recived my Windows Vista upgrade Moduslink yesterday. I followed the book on how to upgrade to Vista, and the first step was to update the BIOS to 5.10. The BIOS code was provided on a CD and I applied it by the book. Now my A100 will not boot. It s hangning to the beautiful red-logo Toshiba to the POST screen. The only button on the keyboard that responds is the ESC key. When you press the switches of the screen to the screen of detailed JOB. Just under the CPU information, he says that he has "no TPM or TPM has problem", there are information memory and "Press F2 to enter setup".
    Nothing happens more...
    Is there a smart way to reset or rollback BIOS? Please?

    Please excuse me if the English is bad...

    / Fredrik

    You are 100% sure that you used the good BIOS?
    Seems that you have used a wrong!

    Please check if your number of Satellite A100-178.
    That I remember that the laptop is a part of the PSAA9E series.

  • Satellite A100-233 - freezes during the update of the BIOS

    I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
    Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

    OS: Windows XP Pro SP3

    And when I tried the BIOS update and load the new BIOS: ok
    Analyze the compatibility of old and new BIOS: ok
    Read old BIOSES: ok
    Save the old BIOS to the backup file: ok
    New Flash start cant BIOS and 1-2 min after the gel cell

    I solved.

    but really not funny...

    If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

    Post edited by: jadefox

    Hello

    I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

    On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
    http://EU.computers.Toshiba-Europe.com > support & downloads

    Welcome them

  • Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

    Hello

    I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

    See you soon
    MB

    And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

    To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

  • Satellite A100-253 - question on the display, the sound and LAN drivers

    After getting a fresh installation (windows XP) on my Satellite A100-253, I thought that I needed the latest drivers. Apperently the drivers from the Toshiba site are obsolete or do any work.
    Here are my problems:

    -Display drivers is not installed at all. Instead, I installed the Catalyst drivers from another site but the resolution will not go higher then 1280 * 800, where my screen works better @ 1280 * 1024. Where can I get decent display drivers so I can put a normal resolution?
    -J' downloaded audio drivers on the Toshiba site but the sound is worse then it was. Where can I get the best drivers?
    -LAN (no WIFI) drivers on the Toshiba site seem to only have a uninstall.exe. Where can I get for my local network actual installation files?

    Thanks for the help in advance.

    Born the

    Hello!

    1. drivers you can get on the site of Toshiba or live production.
    Where did you download the drivers?
    Maybe a BIOS update will solve the problem.

    2. it of the same as point 1; Toshiba or directly to manufacturing.
    But don t forget a notebook is not an entertainment system, and if you want high quality sound you need external speakers.

    3. this package contains the actual installation files, but you must install them manually. This may make you in the device, right click on LAN card Manager and update the driver.

    Good bye

  • Satellite A100 (PSAAR) ID_ERR_NOTINSTALLTVALZ_MESSAGE to the VAP configuration

    Hello

    I have Toshiba Satellite A100 (PSAAR) and the installation of VAP (value added Package) of the site Web of Support from Toshiba, I get error ID_ERR_NOTINSTALLTVALZ_MESSAGE and then the installation ends.

    The proposed solution is to do a BIOS update, and it did not work for me, as I said in the topic (I've updated with bios-20071126124517, which is the package recommended for my laptop model). I use Vista 64 bit in the way, and I try to install VAP to eliminate the unknown hit-and-run driver (TOS1901 if I'm not mistaken) in Device Manager. I worked on this problem for a few days now and I'm really tired, so I need your help as soon as possible.

    Thanks in advance...

    > I'm using 64-bit Vista by the way
    Have you tried to install the VAP 32 bit on 64 bit Vista?

    If Yes, then I m afraid it won't work, and I guess this is the reason why this error message appears during the installation procedure

  • Satellite A100 - defective speakers, gives the crackling

    I have the Toshiba Satellite A100 model.
    My speakers do not sound right.
    Left speaker does not work.
    They give a crackling.
    Audio, video, doesn't sound right.
    Whenever I play a song it gives a feeling of speakers are blasted.
    When I turn the volume down they sound a little ok.

    Advice needed.
    I need to replace speakers or should I update the drivers?
    Thank you...

    After reading your ad, I think the speakers are defective and must be replaced.
    You can try to change some sound settings to see if something will change.

    In any case, I think driver has nothing to do with it and you need new speakers.

    Have you tested with headset or headphones? How does it work?

  • Satellite A100-570 slow downs the wide connection band

    I have a laptop Satellite A100-570. I bought this in July antiques.

    Just open the laptop, not even connect to the internet it manages reduce my speed on broadband.
    I know this because I'm doing a test of speed before and after the opening of the laptop using my PC.

    Computer laptop & PC are not yet in the same room!
    The wireless network connection is disabled, disabled 1394 connection and only LAN OK.
    (I use a BT Homehub, connected to my PC).

    My question is: how a laptop computer that is not on the internet brings to BB speeds.
    the laptop is o.k. otherwise.

    Any help appreciated.

    To be honest, the whole story is a little understandable and strange for me.
    Your laptop is connected to the router with a LAN cable or what?

    Sorry but I don't quite understand you. What is the speed with and without a cell phone?

    By the way: did you clean install of the OS before you start using this laptop?

  • Satellite A100-784 - connect to the TV via a HDMI cable

    Hi friends,

    I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
    I'm not able to find if the laptop is compatible for it.

    Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

    Sorry guys, I'm quite naïve HDMI company.

    Thanks for all the help,

    Kind regards
    Perkins

    Hey Buddy,

    What do not know exactly?

    The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

    If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

  • Satellite A100-773: problem with the installation of WinXP Pro

    Hello

    I try to install Windows XP Prof on my new laptop A100-773 (Media WinXP Center preinstalled Edition). After that I put in the installation disk, restart the computer and then selected CD in the boot menu, it said something like "verification of hardware configuration". After that black screen and nothing more happens.

    Also, I tried to start Linux (Knoppix) CD. Same problem, at some stage, the system stops and doesn't do anything.

    Anyone has any idea how this problem could be solved?

    Thanks a lot for your answers in advance.

    Kind regards

    Chris

    Hello

    Have you tried to boot form CD recovery Toshiba or on the original CD of Microsoft?
    The recovery installation CD should generally work without any problem.
    In addition, if you want to retrieve the unit with the Toshiba Recovery CD you will get 2 modes. Standard and expert mode.

    I guess the message because there might be something wrong with the hardware or any device. I would recommend to enter the BIOS and check the settings. You can also try the options default and safe change.

    But first try to boot from the recovery CD.

  • Satellite A100 - USB not working not not after installing XP

    Hi guys

    I am reloading Satellite A100 PSAA9A OCV004 for a friend he lost discs, so I loaded a legal copy of XP home everything goes well so far but I can't get the USB works any ideas?

    TNX Mick.

    Hi Mick,

    Have you installed new Service Pack 3 for Windows XP? This is important because it contains many important updates.

    After the installation of Service Pack 3, you can start with the installation of the driver. Everything you download from the site Web of Toshiba.
    It is also important that you install the chipset driver.

  • Satellite A100-785 asking me a BIOS password

    I got an error massage and I pressed (default load) and the phone asked me password on the Bios...
    I have not set a password.

    satellite a100-785

    Hello

    Strange that you mean that the Satellite A100 ask the BIOS password that you have not defined?

    However, there is no way to remove unknown BIOS password. Only the Asp technician can do that.
    Therefore, you will need to contact the ASP technician who could remove the BIOS password for you.

    Welcome them

  • Satellite A100-237, which is the HARD drive more big, I can install?

    Hello!
    Can you guys help me. I have the Satellite A100-237
    I would like to buy a new HARD drive (250 GB or 320).
    What is the largest HARD drive can I install in this laptop? I couldn't find any info about it.
    Thanks for your help.

    Hello

    The point is that there are no details or info on HARD drive sizes compatible max.
    If we can only speculate.
    Is the laptop seems to support SATA hard drives and in my opinion one 250 GB or more should work.
    But this is only a personal opinion, and it would be very interesting to know if a HDD 320 would work too.

    Please post some comments after you have upgraded the HARD drive.

    See you soon

  • Can satellite A100-999 - I recover the HDD password?

    Hi all

    I had a virus, so I formatted my computer, a Satellite A100-999. After I did, I was going to install Windows Vista, but I never could, because they ask my HDD password and I don't know what password it is that, I don't see it anywhere. My computer has been installed in the store, I only have a bootable disc, they gave me.

    My question is: How can I recover my HDD password? Is it possible? I can boot the system in any other way?

    Thank you!

    Sara

    It of not possible recovery or removes the HARD drive password. An ASP peut t for this too.

    Sorry, but in this case, you need a new HARD drive. There's no other way.

Maybe you are looking for