Yet WT8-A-102 - USB for pc connection

Similar Questions

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• Yet WT8-B-102 discharge while being closed

  Hello

  My Toshiba still WT8-B-102 performs 100% to 5% and less then 10 hours after being arrested (not the sleep or Hibernate). I use Windows 10. I can't tell what it looked like on windows 8.1 because after buying the Tablet I've updated to W10. I even did W10 clean install (with drivers from the toshiba site). During normal operation my battery lasts about 6 to 8 hours, so I guess there is nothing wrong with the battery itself.

  You have ideas, what is the problem? Some perhaps of settings in Windows?

  "USB Sleep and Charge" and Wake on LAN/keyboard drain the battery when the unit is off. Disable these settings in the BIOS.

• Yet WT8-B-102 - experience with Win10 updated?

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ?

  Concerning

  Originally posted by LegionPL
  

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ? I have

  Concerning

  Hello.

  I've updated WT8 my wife a week with no problems at all.

  Take note, however, it takes a LOT of time. Set aside the best part of the day.

  That's what I did on the advice from my research.

  Plug your tablet in socket.
  Check Windows update for new updates and install them. It is the same for all the other programs that you favor.
  Uninstall all malicious programs you may have installed (compatibility issues)

  I also disabled my anti virus program.

  A scope of hand a 8gig USB if you want to create the boot USB installation.
  You don't need to do it immediately as you can do it at a later date.

  During the upgrade, you will be asked if you want to upgrade this computer or do a clean install. I chose the update this computer and transfer my settings (or words to that effect).

  If you want to take the path of own tinstallation, you must first upgrade your operating system current version OS 10 and then when this has been done you need to go through the entire procedure using the boot USB that you created earlier or to creat now.

  The main thing to remember is to be patient, very patient, as the upgrade almost takes care of it's self. Read all the instructions carefully before you click.

  The keyboard that you should select if requested we international. I inadvertently clicked on something else and more later found that some keys on my keyboard had the mind of their own, I got that without too much trouble

  Go for it, I think you'll like the new OS 10. The only downside for the new OS, it's that you may incounter problems driver with installed programs. I think I can live with the Kindle.

  I hope it is of some

• HP stream 7 USB for PC connectivity

  New HP 7 stream. Got the WiDi/Miracast works with the Intel Web site pilot. Now, I need to find a way to connect via USB to my PC for General downloads, etc.

  It's the full version 8.1 Win (NOT WM8.1/Mobile!).

  My PC has USB Ver 2 and 3, and 7 flow has Mini-USB 2.

  Any help is appreciated.

  Good small tablet. Sturdy and not flimsy like the other 7 inchers.

  For file transfers or USB attached network (style)? You will need a USB transfer in addition to the OTG cable cable for file transfers. Something like this http://ww2.laplink.com/cables/detail.html?product=USB%202.0 or http://www.amazon.com/Belkin-Transfer-Cable-Windows-F4U060/dp/B0093HCIQ0/ref=sr_1_1?ie=UTF8&qid=1418491517&sr=8-1&keywords=usb+transfer+cable

  Is not network style endearing between my laptop windows & tablet, so can't help you there. It's between my phone & tablet, for this it's a menu on the phone option.

  D_A_H wrote:

  New HP 7 stream. Got the WiDi/Miracast works with the Intel Web site pilot. Now, I need to find a way to connect via USB to my PC for General downloads, etc.

  It's the full version 8.1 Win (NOT WM8.1/Mobile!).

  My PC has USB Ver 2 and 3, and 7 flow has Mini-USB 2.

  Any help is appreciated.

  Good small tablet. Sturdy and not flimsy like the other 7 inchers.

• Support USB for ESXi

  Hello community.

  There is very little son on ESX 3.0/3.5 and Console of service support for USB devices, so I won't re-collection of information here.  SC is really version of Red Hat Linux, USB support is incorporated.

  (But not for the Virtual Machine hosts individual granted.)

  My question is about support and USB for ESXi connectivity options.

  ESXi does not have a Service Console based on linux but the implementation of BusyBox OS to help with management of the hyper-visiere tasks, how USB support built-in. Support must certainly be there for bootable USB and also more rack KVM now have USB keyboards.

  Just a question how to go into the options of USB support?  If SC, then I could use commands #mount and #cp... but no SC as shown above, also no space available in most of the cases on local storage.

  Thank you and I will reward points quickly.  Looking for ideas on how to use the USB of ESXi connectiivty options.

  If you want the contents of the disc to be visible from the VI client, Yes, you can use VMFS3 as the file system.  If you want to just level console access to the contents of the device (for example a "not supported" or "Not supported SSH" connections), you can use VFAT.  The best way to create a filesystem VMFS3 on this is to use storage management in the VI Client.  I tried not to add additional USB drives, so I'm not sure it will work 100%.

  In the CLI, you should be able to look in/dev/disks and see all the disks on the system.  You can use fdisk-l/dev/discs / vmhba32\:0\:0\:0 to see the current map of partition of a disk (in this case, disk0 on vmhba32, which is actually the USB on my ESXi machine).  You should also be able to use fdisk to create a partition (type should be fb) for a new store VMFS.  You can then use vmkfstools to create a file system on the partition that you create - for example: vmkfstools vmfs3 - C/dev/discs / vmhba32\:0\:0\:1.  Be careful with this command, you get the correct HBA, disk and partition number, as wrong could wipe out something important.

• How to connect TV again WT8-B-102

  Hello

  I have toshiba still wt8 b 102. I don't have a micro hdmi, micro usb only. How can I connect my tablet to tv (no wifi)?

  Post edited by: kropek

  According to the datasheet of Toshiba STILL WT8-A-102, the table supports the micro HDMI port output.

  This port can be used to relate the table to TV s HDMI IN port.

  Of course, this requires the use of micro HDMI to HDMI Cable

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• Windows does not start correctly when some multiple connection for external hard drive USB hubs are connected

  When starting, I have 2 USB hubs that connect to multiple external HD.

  If I disconnect the hubs, windows always starts very well.

  If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.

  Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?

  Any clue?

  Hello Patrick,.

  If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).

  Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.

  The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.

  Keep me posted.

  And thanks a lot for this.

  Kind regards

  BearPup

• hp7510 connected by USB for Win 7, "printer failure, 0xc19a0028.» "Stop, then press.

  When I turn the hp7510 installed yesterday, connected by USB for Win 7, I get "printer failure, 0xc19a0028.» "Stop, then press. Same error 6 times. How to fix?

  I turned on the printer, ignored the advice of "The printer failed" message to turn off, then on again. Then, with the sill of printer on, I reinstalled all the ink cartridges. The printer worked.

• Problem with connection usb for Dell Dimension 310 HP 4050

  I have a HP Laserjet 4050.  I bought a Dell dimension 3100 series.  I bought a usb cable to connect the printer.  Since I couldn't find the real on the HP website driver because the printer is interrupted, I downloaded the universal driver what they suggest and plugged into the usb port.  The system says it has recognized the new hardware and I see the doc in the queue, but it prints ever.  Does anyone have any suggestions?  I'm frustrated.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18318&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=6&submit.x=6&lang=en&cc=us

  Above is the link of this universal driver > select the operating system to the link above...

  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475

  I suggest that you contact HP at the above address, or ask their Support Forums:

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Still 2 WT8-B-102 - loading and using a mouse at the same time

  Hello

  I have a Tablet yet 2 WT8-B-102. Anyone know, please, what would happen if I tried to load / use on current electric at the same time that the use of an external mouse?

  I have an adapter that plugs into the micro-usb port and has two connectors USB (life-size). I have attached a USB mouse and one USB key to another and worked well. However, if I plug in a USB mouse and the plug of the charger on the other USB connector (via a USB cable at each end full size) what happens? Would like to fry my tablet, because (in my opinion) I would like to put something in the (electricity) Tablet at the same time as I was taking something (the mouse) via the same micro-USB? The Tablet could not bear, or would I ask it to do too?

  I know this sounds a bit garbled but I did my best to explain what I'm asking, and if someone who can understand what I'm going to talk can help, please, it would be so awesome.

  Thanks for reading.

  Alison

  My blade of ebay 1 megabytes/s usb adapter worked litle, for keyboard and mause but it wont charge the tablet.

• WT8-B-102 does not start even after charging

  I recently bought a Toshiba WT8-B-102, and I have some problems with it.

  First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well

  but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?

  I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?

  Thank you

  Probably the battery is totally discharged.
  In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power on

  Yet WT8 and Encore WT10 won't turn on after some time of no use
  http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htm

  If this will not help, the device must be checked for possible hardware problems.