Satellite A105-S4114 - black screen, maybe the heating problem?

Similar Questions

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• Satellite A300-Y00 black screen but the fan from

  I bought a TOSHIBA satellite A300/Y00 in June 2008 – 16 months. Model number PSAGOA-02Y. After ten months he did not start suddenly. It sounds like the processor and the fan starts but the screen and the led underneath the screen was all black. I tried to connect it to an external monitor, but the screen was too black. I gave her to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced for free that it was still under warranty.

  A few weeks ago the same thing happened again. I turned off it and for some reason at random, he started as usual a few hours later. I called Toshiba to say that, in my view, that computer will crash soon again. They said that they will be able to take it in for service, but if they could not find anything wrong with it that they would charge me $ x. I don't give him service. I even went to a local Toshiba support guy who said that he couldn't find anything wrong with my computer and that there nothing that could do.

  Now the same thing is happening again. This time I can't do it again. Of course their fantastic 3 months for the last motherboard warranty has expired. I tried to take out the battery and start it only to the power, but it does not help.

  I don't want to pay $500 for a new motherboard, and then drop it again. It is obvious that it is a hardware problem and I think that Toshiba should replace my computer free of charge.

  Anyone with similar problems? Any advice? Get pretty annoyed...

  Hello!

  Have you ever contacted again authorized service provider? If this is not the case, do please! You should talk about it again with technicians and then you will see what they can do for you.

  I can understand that it is irritated, but these things can happen and I think that the ASP will be best for you help you. To be honest, I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and knowledgeable. It of always nice to talk a bit with them.

  I m not a technician, but maybe they can fix it as a gesture of good will or if you only have to pay the motherboard and not Exchange

  Welcome them

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite A215-S6804 - black screen until the system load

  Hello

  I have a problem with the laptop of the subject. After pressing the power button / stop, the screen is black until the Vista/Linux loading bar (got both installed) is visible. I have the most recent BIOS update and replace the LCD (but electronics as UPS etc are old screen, the seller told me).

  The only way it works great (so I can see the Toshiba logo and the menu grub) is when I put the flat LCD on table (I know it sound funny).

  Does anyone have a solution for this weird thing? I tried looking for answers, but found nothing.

  Hey,.

  And if you connect an external display you can see the screen of the Toshiba BIOS or is it always black? That would check whether the problem is related to the internal monitor or a part of the mother/graphics card.

  If you try to enter in the setup of the BIOS is also this work?

  But if it works when you place the LCD flat on the table, it seems that it has something to do with internal LCD cable. I think it needs to be replaced due to a bad connection.

• Satellite A45-S150 - black screen after the recovery process

  After problems with a virus, I ran the recovery disk and reformat the hard drive and reloaded the OS. When the process pushes me to remove the disc, it begins to restart, but only shows a black screen. I restart the process of recovery only with the same results.

  The laptop came loaded with XP, but that the recovery Application is running, it says it is loading Windows 98. Could the original recovery disc was loaded with the wrong operating system?

  What's next?

  Hey,.

  > I restart the process of recovery only with the same results.
  You can install Windows using a normal Microsoft Windows disk?
  So, you can check if the problem is related to the computer laptop or recovery disk itself.

  > it says that it is loading Windows 98
  Don t worry not about this message. As far as I know it has something to do with the software that allows you to copy the recovery image on your HARD drive. Recovery disk still contains Windows XP ;)

• Re: Satellite L505-13W - black screen on the camera built-in

  Guys, pls help me to fix my camera built-in.

  My webcam screen turn to black. don't know why? his work, but I don't see anything...
  I have already installed the driver, there need, but nothings happened. Before that it works well but when I reformat, I do not know now. My unit is Satellite L505-13W and my integrated camera model: USB2.0 UVC webcam...

  Please help me. Thank you!

  Hi val_mactal214,

  Maybe this article can help you:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite X 205-SLi3 - black screen with the mobile mouse at startup

  I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

  Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

  Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

  I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

  I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

  I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

  I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

  The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

  Someone had a similar problem?
  If so, what was the solution?
  I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

  Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

  Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

  Welcome them

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite L500-1WG - black screen, turn on

  Hi all

  I am looking for some advice,
  I'm far from being a computer whizz but know my turn well enough. I put my model below.

  No apparent reason, I have the black screen.
  The laptop was working fine yesterday. Windows has shut down the computer automatically to install an update. Since the laptop this morning train, nothing.
  The power lights, flashing web cam, windows sound times.
  No courier. But nothing
  I can even enter my password and it is registered on. I tired to fix battery, but it did not work. Thanks in advance to all who wish to help!

  my model is
  Satellite L500-1WG
  Part number: PSLS0E-07501DEN

  Main features
  Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows 7 Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
  -Intel Pentium processor T4400
  -DVD - RW SuperMulti drive (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB 2048 + 2048
  -39.6 cm 15.6 "TruBrite HD 1366 x 768 display high brightness with backlight LED with aspect ratio 16:9

  By pressing keys FN + F5 allows to switch between the internal and external screen.
  I recommend you connect the external monitor (or a LCD TV) and press the keys mentioned in order to verify if the external display will work properly.

  But I'm a bit confused... you said you were abele to enter the password...
  You see the field for the password?

• XP, black screen with the msg of boot errorm insert disc drive system & hit enter, does that mean?

  When you feed on my PC I get a black screen with the "Boot disk error msg; "Medallion system disk & press enter" what does that mean? I don't have the original CD or a recovery disk, what can we do?

  Hello

  This means that your hard disk contains an error, or the start-up phase damaged operating system. If you have any bootable media, you must visit certain computer services near you.

  Maybe just an idea - you have a floppy drive? Maybe you have inserted the floppy in the floppy drive. If the answer is Yes - Remove the floppy disk and restart your computer.

  LC

• Black screen in the source monitor

  I'm trying to synchronize an audio file that is good with my .mov. But when I do exactly what is described here automatically synchronize the audio and video files in Adobe first Pro CC from the audio - waves YouTube I just get a black screen in the source monitor. Why? Shouldn't I be see the its synchronized with the video file in the source monitor Panel?  I'm new to first, maybe if I have a setting turned off? Please advise!

  [Please choose a brief description for the title of the thread, and only after the real problem in the main body].

  Post edited by: Jim Simon

  Yes, the image expands, but you have the Source and monitors shrunk very small sizes n the screen capture program.

  Was the clip defined when you merged and exit points?

  (By the way, my post request 3 was on target.)  The video is considerably shorter than the audio, which represents a large part of the black you would see in the Source monitor.)

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!