Satellite A135-S2386 - DVD - RAM drive problems

Similar Questions

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• Satellite P100-275: DVD - RAM drive is always detected at startup

  Hello

  I have a problem with my Satellite P100-275, all materials are installed correctly, but when the PC starts, I always "new hardware found" for: hl-dt-st dvdram gma-4082n.

  I tried to install the connection to Internet, I tried with the driver c:\toolscs\DVDRAM software\Setup.exe, but nothing seems to work.

  Here is the screenshot of the hl-dt-st dvdram gma-4082n in materials:

  http://img209.imageshack.us/img209/7326/materialsza4.jpg

  Thank you

  Hello

  Is this original delivered by car or did you upgrade?
  By the way: as far as I know if you use the original recovery with original configuration hardware delivered media, everything should work well. If you change something about yourself, it is possible that something is wrong. Usually, for DVD player, it is not necessary to install a special driver and because of that, I'm a little confused why this message occurs at the beginning upward.

  Please give us more info on this drive.

• Satellite P30 - Dvd ram drive not working properly

  Help, please...

  I tried to install 2 pieces of software on a new satellite p30, and resembles a need for new drivers for the dvd player, which is a carpet * a dvd - ram uj-830 s.

  Basically, I installed some bog standard games, they fit very well and while respect it works perfectly fine until I have try to load the game itself, and with one, it brings up the message 'Please eject and re-enter cd-rom.

  Can someone please point me to the right direction because everything I tried so far has failed, have installed the drivers from ram dvd that came with the laptop, but nothing helps.

  Post edited by: frazz

  Hello

  It will be interesting to know if this happens with all data media you use.

  In my opinion you must first locate the source of this problem. Check if your DVD - RAM drive works correctly using different CD, DVD and DVD - RAM of course. If Yes, in this case it is a problem specific, based on the game CD.

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Need drivers toshiba satellite A135 S2386 XP Professional

  I have a laptop Toshiba Satellite A135 S2386 originally shipped with windows vista Basic, but he now has windows xp professional installed and there are 2 unknown pilots missing in Device Manager.  I think we're the bluetooth driver and the other unknown device is probably for the media programme. There are 4 buttons on the Panel of this laptop the cd rom. dvd 1-button control is a button of media, but toshiba Web site has only driver for windows vista and windows 7, I can't find these drivers for the program media and bluetooth for windows xp professional. Can anyone help

  Thanks in advance for your help

  Devices that have a problem with the drivers should be listed under problem devices in msinfo32...

  • Click Start
  • Click on run
  • Type msinfo32.exe and press enter
  • Enlarge (click on +) the components section
  • Expand devices problem

  Each issue must have an entry that looks like the format that...

  ID of device PNP PCI\VEN_1011 & DEV_0009 & SUBSYS_21140A00 & REV_20\3 & 267A616A & 0 & 50

  You can search the FRI and DEV (in the example above 1011 and 0009 respectively) codes at http://www.pcidatabase.com/

  This can direct you to a place where you can get the drivers. After being on a similar route for someone else with a Tosh, I'm afraid you're out of luck.

  Are you aware that XP will end of life in less than a year? Probably not a smart move to go back to XP in the long term.

  Tricky

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Error message from device IO on the DVD ram drive

  Help someone!
  I have a Satellite S203 and recently the em * a DVD ram drive stopped recognize any kind of CD/DVD, etc.. It must much worse & worse over time with her works do not at all. I tried to change the configuration of the IDE to PIO but always without success. Help, please...

  Jelibabi

  Hello

  Sorry, but I don t know what laptop you have (xxx-S203) but I can tell you that DMA if available is standard setting for all Toshiba laptops. On this path, it is not easy to give you a correct answer, but if the reader can't read original CD or DVD I guess there is hardware malfunction and the drive needs to be replaced.

  Good bye

• I want to install Windows XP edition SP2 family in Satellite A135-S2386

  Help, please.

  I want to install Windows XP Home SP2 for my Satellite A135-S2386 edition.
  Where can I get the drivers?

  Hello

  The SATA (Intel Matrix Storage Manager) driver must be installed first, if you want to reinstall the operating system XP on this laptop.
  The Intel Matrix Storage Manager can be downloaded also from Intel or the Toshiba Web site the page we. You should know that your laptop has been designed and delivered only for the American market, so you must use the Toshiba drivers from an American Internet site.

  However, I found many comments on Intel Matrix Storage Manager here in this forum.
  Then maybe you should use the Forum search option advanced for more useful discussions on this topic.

  Buddy Bye

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• LG DVD-RAM drive read only not the disks in Windows 7

  Title pretty much sums up it...

  I installed 7 and it works great!  But if I didn't put in the drive to load on the system is not turn it up.  I can see the drive in my computer, but he still thinks that the CD1 of World of Warcraft's inside, but it doesn't have either turn this disc.

  I got a bunch of things off when installing (HyperTransport, IDE, floppy drive), should I turn all distributed and try to load it up, just to reactivate all later?  Or is there a known solution?  Exact model is the GH22NS30. AMD Athlon 64 x 2 processor Dual Core 5400 + Black Edition; Abit AN52 nForce 520 motherboard; OCZ SLI-Ready Edition 4 GB DDR2 (PC2 6400); Western Digital WD360GD 36 GB Raptor; Raptor 74 GB Western Digital WD740ADFD; LG GH22NS30 DVD - RAM drive. XfX GeForce 8800GT Alpha Dog Edition

  Hi Rustedbucket,

  Thanks for posting on the community forum is ready for Windows 7.

  Try to remove the filters from the registry, see if that helps with this problem.

  Be sure to back up the registry on external media before editing the registry.

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  Please let us know if that helps you or additional assistance is needed on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• DVD - RAM drive means that I can burn DVDs & CDs on the Qosmio series F

  Can someone tell me that if I see "DVD - RAM Drive" under my computer does it means that my laptop allows you to record CD and DVD?

  I don't know which series Qosmio F you have exactly, but this means that you can burn CD - R, CD - RW, DVD-R, DVD - RW and DVD-RAM media empty. It must also be possible to use DVD + R and DVD + RW media. I didn t try this because I prefer DVD-R virgins.

  Just for example: my friend has a Qosmio F20-159 and according to the specification of the drive can write monitoring media
  CD - R 24 x
  CD - RW 4 x
  HS CD - RW 10 x
  US CD - RW 10 x
  US + CD - RW-
  DVD - R 8 x
  DVD - RW 4 x
  DVD + R 8 x
  DVD + R (Double Layer) 2.4 x
  DVD + RW 4 x
  DVD - RAM 5 x

  Good bye

• Need Xp drivers for my Satellite A135-S2386

  I installed Win xp on my Toshiba Satellite A135-S2386.
  Need drivers.

  Service packs are supported?

  Can U suggest me...

  It is a Toshiba laptop that was specially designed for the American market.
  You should visit the Web from Toshiba site we and should look for here.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  If you will not find the correct drivers, then you might try some single XP drivers went out for another series of laptop computers which was equipped with the same features as your A135-S2386.

  Good luck