Satellite A200-1BW - BIOS issue

Similar Questions

• Satellite A200-1BQ - BIOS update failed

  Hello everyone

  I update the BIOS of my laptop and something went wrong: () now my laptop does not turn on the screen.

  I went to see on the web about Cree Bios recover. I created my floppy drive and I am using a USB drive connected to the USB port on the right below.

  When I click FN + B laptop computer goes into mode of recovery and is 40 seconds for the disc I wait 10 minutes turn off the laptop and nothing (still dead: ())
  I downloaded the bios.wph tohsiba site for this laptop.

  The laptop is a: Satellite A200-1BQ. Part number: PSAECE-01V011PT

  Please help me... the phone reads the disk but then does nothing... must be something failed... have used the phlash.ini but do not...
  Thank you very much

  Hi fear_angel,

  Well, I think in this case you can do anything and I would not try this BIOS recovery program. There is no formal way and you could destroy most or the entire module ROM.

  You must contact an authorized assistance service provider. Technicians can try to reflash the ROM module I'm sure they will help you as much as possible.

  Good luck! :)

• Re: Satellite A200-1FL: BIOS asking me a password that I don't know

  Hello world

  Last week was a bad BIOS update and my laptop has not begun. I managed to fix it with the crisis recovery disk and the "BIOS update" of the toshiba support web http://support.toshiba-tro.de/tools/eula/info_eng2.asp for Toshiba Satellite A200 PSAE6E, Windows Vista.

  My problem now is that BIOS and system start-up or disk, after that the BIOS to ask me a password that I don't know because I had a different password for the BIOS and no for the starting System.

  Anyone who would these passwords? I tried a few default passwords found in internet with no luck

  Thanks in advance

  Hello

  I think that if someone can really help with this password or something like that in this forum. You should contact ASP (SAV).

• Satellite A200-1IZ: graphics issue

  Hello

  I bought Toshiba Satellite A200-1iZ 3 days
  And I've got someone with my chart like this:
  http://www.fotosik.pl/pokaz_obrazek/pelny/3411bae30709a6b2.html.

  If I go back, it'll be normal. but this is the 2nd time ;/
  What should I do?

  Maybe something wring with the graphics card?
  IF this question is displayed again, connect it to an external monitor to check if the same will appear on the second screen.
  If this problem does not appear on the external monitor then display either the laptop or the malfunction of the inverter FL.

  However, two cases, must contact the service provider authorized in your country because this could be a hardware problem and the defective part must be replaced.

• Satellite A200 - 1BW PSAECE: update BIOS: size of Rom file is incorrect

  Hello
  I tried to update the bios from the Web site.
  But when I flash, it is said that "file size Rom is incorrect and does not update to the Bios.

  How can I sort this problem?

  First question:
  Why do you update the BIOS?

  The update of the BIOS is not necessary if the laptop works properly!

  But back to your problem.
  Found a solution and an answer why the error message: size of the Rom file is incorrect is displayed:

  Check this box:
  + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
  + I always receive following error message: the size of the ROM file is incorrect. +
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Good luck

• 2180 satellite CDT: update BIOS issue

  I have an old Satellite 2180 CDT and a message saying "ready for the update of the BIOS. Please insert a disc of the BIOS update... "appears when I turn on the computer.

  I downloaded the update to the correct BIOS to floppy and follow the instructions of Toshiba.
  When I insert the disk and press a key.
  the disk starts for a second, but stops and starts again. It continues, and at the same time, the laptop emits a short beep every time the hard drive begins.
  Light flashing for the floppy green.

  I'll be very grateful for any help. I don't often use the computer, but it has some important information on this subject...).

  Hello

  Can you please tell what wrong because I s t see any problems.
  The fact is that you can hear a beeping sound during the BIOS update procedure.
  Did you get the error messages or something like that?

  Maybe this document of the BIOS update will help you:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

• Satellite A200-1AD: Bios password set after the start of the USB

  Hello

  I have an A200-1AD bought in August 2007.
  My BIOS password has been set after that I booted up with a non bootable USB key into it.
  The date has been reset to 01/01/2005.

  Anyone have this problem before?
  As far as I know that there is no virus on USB key or a laptop.

  I can start my laptop but cannot get into the bios because of the question of password.

  Does anyone have a solution?

  Welcome them

  Hey Buddy

  To be honest I have no idea why this password has been defined after using non bootable USB flash drive. For me it s not explainable

  However, the bad news is that you will need to contact the ASP in your country to get rid of this password.
  Is BIOS password can be removed by ASP and so the ASP help is needed.

  Welcome them

• Satellite U400 - update BIOS issue

  Hello
  I thought that I've updated the BIOS, but when I downloaded the file tohsiba and installed maybe I did installed it wrong I should change in the settings or something because the version of the BIOS is good it displays the latest version: TOSHIBA V4.80
  But on the SMBIOS version it shows the oldest a ver 2.5, please someone can tell me or show me how to upgrade that to?

  Here's a picture of you guys show what I mean:

  [http://img24.imageshack.us/img24/8007/screenshot001mc.jpg]

  and because in this version of the bios so there manny settings if I click on: Advanced settings: FLAGS, DMI and DEVICES but on DMI and I see 'Category' and there motherboard, system, chassis, OEM parameters and others, may be I should click then it will change in the new version even in not only the BIOS and SMBIOS or?

  Thank you

  Hello

  What version is broadcast in the BIOS settings?
  Go to BIOS and check this!

  Usually, we should see version 4.8
  If your update of the BIOS has been updated correctly, you will see the v4.8 in BIOS settings.

• Satellite A200-23U - Bios Update need for XP

  Hello!

  Where can I find the update of the BIOS for this laptop for Windows XP?

  Thank you.

  Seems that European Toshiba driver page provides a BIOS for the Vista operating system and the BISO for XP is not available or do not exist.

  Have you tried to install XP without updating the BIOS?

  I think this should be possible and the update of the BIOS would not be necessary at this time.

• Satellite A200-1If - BIOS (RTC) battery this time need

  Someone at - it a the bios battery (RTC) spare parts for this motherboard. I just talked to Toshiba - who told me to talk to "Topaz", who told

  "It is part of the motherboard, and we cannot get hold of the components to the motherboard. A new motherboard will cost £160. This is the best we can do '

  The battery would cost no more than £3.
  Anyone got a please?

  Hello

  Maybe it s enough if the RTC battery is charged?
  You can charge the battery in the machine for several hours.

  Here's an interesting document on this subject:
  http://APS2.toshiba-tro.de/KB0/TSB6301FE000DR01.htm

• Satellite A200 - updated BIOS fail

  I made the big mistake. I tried to install the update of BIOS for my A-200 SAT. Everything went well but after blocking switch off PC unbootable.
  If I start it manually led power lights up flesh hard drive some time, and that's it.

  I got this update with toshiba TEMPRO with Toshiba. I need some advice

  Which is really bad, but in this case you can t whatever it is.

  You should go to a local ASP. Maybe they can the recovery BIOS and in the worst cases, the mainbaord must be exchanged.
  On the Toshiba site, you can search for an authorized service provider.

• Satellite A200 (PSAECE) - driver issues

  1. in the future there will be available all drivers for Windows 7?

  2. the display driver [KLIK | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK] is very low for XP. It works, but when I send my Samsung LCD 32' screen, then I resolution 1280 x 1024...  :(sic!) On Vista, there are display drivers that gives me 1920 x 1080! are there other drivers better so now I for XP?

  3 touch Pad-> drivers are very bad, because I can't scroll pad! I don't know why... I downloaded this [KLIK | http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 722 selSho rtMod = 511 & language = 13 & selOS = 10 & selType = 116 & yearupl ADO = & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 27 & electedLanguage s = 13 & type = 116 & page = 1 & ID = 58845 & DISO 1 = 0 & driverLanguage = 42] do you have a better driver? On Vista I option I can turn on touchpad in blue... On XP not...

  4. If I go back to Vista in this state how to buy, can I install XP and then to see the 2 systems? good that now I deleted Vista and later install XP

  Hello

  (1) I don't know so I think we should wait a few weeks or a few months more

  (2) what is the native screen resolution of your external display?
  Normally, you can change the resolution of the screen for the internal and external screen in graphics properties. Check it!

  (3) maybe, you need to activate the virtual scrolling feature in driver touchpad (Control Panel > mouse).
  What do you think about this? ;)

  (4) theoretically, you can use a dual boot with Vista and XP. Why not?
  But mind you, if you use the Toshiba recovery disc to install Vista it erases the entire HARD disk. So you first then install Vista and XP.

  If you have any other questions, please let us know.

• Satellite A200-PSAE6E: what changed in the Bios 2.40 Vista 32bits

  Can someone tell me the release notes for the new Satellite A200 PSAE6E BIOS 2.40?
  In fact, the Toshiba never release notes on their BIOS updates.

  Unfortunately, I didn't find all the details on the changes to the BIOS on Toshiba European pages.
  I found a log file BIOS on the site Web of Toshiba us but Satellite A200-PSAE6E is a European model and I doubt that the news of the Toshiba page relates us to the A200 models.

• BIOS with Vista and Windows XP Home on a Satellite A200

  Hello
  I saw there are different bios version depending on the operating system.
  My laptop is a Satellite A200-PSAE6. The bios for Windows XP Home edition version is 5.30 and 1.70 for Vista.
  I would like to use XP or Vista on my laptop. Both are installed.
  Should which bios I use? Are there similar?

  See you soon,.
  Ano

  If you use Windows XP Home on your Satellite A200 do BIOS update with the version 5.30. This BIOS is designed for all Windows XP Home edition features and you will be able to use all the features of FN keys.

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(