Satellite A200-1NH-AHCI/SATA300/ChipSet and the Installation of Windows 7

Similar Questions

• Satellite A200 - 1 3 - where to find the drivers for Windows XP?

  Hello

  Well, I have a problem, I tried to find the drivers for my A200 - 1 3 for XP and me looked allot, but still I could not find anything. If anyone has them or knows if only I can get of them that I would be really grateful.

  Thank you.

  Hey,.

  You can find all the drivers on the official website of Toshiba, but pilots are moved to * Archives * but you can always download them:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200 (PSAE6) > Windows XP

  Check this box!

• Satellite A200-1QZ: No. HARD drive during the installation of XP

  HIII,

  I have a problem!
  I have my laptop (satellite A200-1QZ) buythis for everyday, it is with Windows Vista: (((I don't like it!

  I download driver xp for any material!
  I would like to install Win XP SP2 cd boot but it's error message, when I access the installation,< harddisk="" can't="" found="">>!

  I think that the mistake is on the SATA - HARDDISK? orrrr

  Please help me: p
  and happy new year...

  You must install the Intel Matrix Storage Manager first.

  This issue has been described many times here in the forum.

  I would really recommend to use the advanced search option forum, if you need details ;)

  Best regards and happy new year friend

• Satellite L300-190, (PSLB8E) and the installation of Windows XP Home edition

  Can I Satellite PSLB8E use this BIOS and configure XP Pro without doing anything else?

  Set controller SATA compatibility mode, and then use Setup / Cd XP Pro?

  It should work. Put in compatibility mode and try to install Windows XP Home edition, but use the Windows XP CD edition SP2 family facilities.
  It is very important.

• Satellite P20 - formatting drive HARD and the installation of Windows XP Sp2

  Hello world

  Beforehand, I want to thank you for taking the time to help me with my questions.

  Due to system problems I'm trying to re - install Windows XP SP2.

  Based on the installation process, I have two questions:

  1. when I start the PC, the operating system Windows XP installation CD in the CD drive, I am unable to run it directly. Instead the old operating system (which I want to remove) starts. Is there a specific key in the Toshiba P20 notebook that runs the CD automatically? I understand that when the Windows XP installation CD to run it gives me the option to format the HARD drive.

  2. If I want to format the HARD disk directly, what is the best way to do this?

  Once again, thank you very much for the help

  Best regards

  Q.

  Hello

  I assume that you have the original CD of Microsoft Windows XP.
  To install a new OS, you must start on this CD.

  Insert the CD and after laptop starting immediately press the F12 key.
  This will enable the Startup menu, and then you may choose the CD/DVD drive as the boot source.

  As to question 2;
  During the installation of XP Setup will ask you the HARD drive formatting. Simply to choose this option and the HARD drive will be formatted.

  Good bye

• I want to transfer my windows 7 Desktop to my macbook, but I lost the product key and the installation of windows 7 ultimate on my desktop

  I want to transfer my windows 7 ultimate in my former office in my macbook, but I lost the product key and when my office had been repaired, the installation of my windows 7 ultimate is already replaced with windows 7 Professional. So now I have that drive. What can I do so that I can install my windows 7 ultimate on my macbook through bootcamp?

  Try asking a surrogate key then. If you have problems, try contacting Microsoft Support;

  Information: Microsoft general site: http://support.microsoft.com/contactus#tab0

  1-800-642-7676 (1-800-MICROSOFT)

• Satellite A200 PSAE6E: no HARD drive during the installation of XP

  Hi Vandeven,

  I have the same laptop that you are, but I have difficulty to get Windows XP to recognize the hard drive.
  It keep saying there is no hard drive detected.

  I don't have a floppy drive either.

  Is there another way to install Windows XP without the SATA Driver?
  My bios is 2.10 and I can switch to a different bios it wont let me. Keep saying bad Bios!. But isn't.

  Please help as I am sick and I tried Windows Vista...
  Programs slow and inconsistent.

  Thank you much in advance.

  Why you n t use the forum advanced search option and search for similar topics?

  Installing driver SATA doesn't concern only the A200 series.
  On most new notebook Series SATA, driver installation is necessary.

  In any case if you want to use the search option, then you would find this Toshiba document:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Welcome them

• Satellite L500-21dts - Stop error code during the installation of Windows 7

  Hello

  I bought a laptop Satellite L500-21dts of Saudi Arabia.

  I lost the hd recovery during try windows 7 installation difficulty. If I try to install windows 7, I get the stop error message code 0x0000009c. If I turn sata to AHCI Windows xp sp2, sp3 installed, compitibality but most of the drivers such as display and wlan not installed. To date give BIOS which is not appropriate for the version of phoenix bios 1.5

  I changed the RAM and HD, but the same problem. It may the BIOS?

  Please help me

  Hey Buddy,

  I m a bit confused now... Do you have Windows 7 or Windows XP?

  If you miss some drivers after installing XP, why you update the BIOS?

  As far as I know Satellite L500 is supported by Windows XP if you can download all the missing drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• How to wipe the laptop Vista Home Premium and replacement/installation with Windows 7 32-bit.

  I am interested in wiping my own laptop (Microsoft Vista) and the installation of Windows 7 32-bit system manufacturer. Can someone help me with this please? Step by step. Thank you!

  Hello

  This should help you.

  Make sure you save all your data before you start this method, because it will be lost.

  And that you remove the existing Partition Vista during this process.

  "How to do a clean Windows 7" install

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• 'No device drivers were found' - installation of Vista on Satellite A200-1NH

  Hello

  I try to install Vista in my Satellite A200-1NH. After the serial key of Vista, I get this message:

  No pilot of the plane have been found. Make sure that the installation media contains the correct drivers, and then click ok

  I downloaded Intel Matrix Storage Manager and put it in USB flash then I traveled to the location USB but same message.
  Any help?
  Thank you

  As much as I know, that this model of laptop comes with Vista and the Vista installation, you can use recovery DVDs.
  Do you mean that the HARD drive is not visible for the installation of Vista?

• Satellite A200-1NF needs time to read the USB flash drive

  Hello

  I have a Toshiba Satellite A200-1NF, model No.: ETA 6-055021FR works with Windows 7.

  My problem is that my USB is plenty of time to read the USB keys.

  Could you please help me to solve this problem.

  Thank you.

  Sorry, but for me the question is not clear enough... Satellite A200 recognizes the connected USB MemoryStick?
  If he recognizes the USB device connected, then everything seems to be OK.

  By the way: you said that the laptop needs a lot of time reading the USB...
  How long does it take and have you checked if the number is displayed using different USB ports and different flash memory sticks?

  If this is not the case, what to do

• Satellite A200 - password disk HARD 'frozen' in the BIOS

  Satellite A200 computer laptop does not recognize the HARD drive.
  Reconstruction of the disk with Vista or XP - Pro (on another machine) have proved to be unsuccessful.

  Originally, continually blue machine armored and quicky restarted, Machine was infected by the virus and Trojans that I believe have damaged BIOS. The BIOS now appears to have 'frozen' a HARD drive password (unknown) which transfers any HARD drive new - perpetuating the problem.

  Any ideas or suggestions are welcome, thanks.

  Hello

  Usually, you should be able to remove the HARD drive password in the BIOS.
  You have to put the old HARD drive password must use ENTER to put an empty string as a new HARD drive password and you will need to confirm this
  Save the changes and restart again

  If this procedure is not possible or does not work then there must be something wrong with the BIOS, module ROM BIOS or motherboard.
  Maybe an update of BIOS/reflash could be useful, but generally all passwords must be removed before attempting a BIOS updates, which could be risky
  I think you should get in touch with a local ASP and need to ask for help, maybe the technician will be able to reflash the BIOS

  Welcome & good luck

• Re: Blank screen on Satellite A200-1 body weight after flashing the Bios

  I have a Satellite A200-1 of body weight, and I flashed my Bios when the laptop froze.
  So I had to restart now, the screen does not light.

  Any help on what to do?
  Do I need a new toshiba Bios Chip?

  I have a Satellite A210 - 16G and I decided to the new version of BIOS (2, 00-WIN32) flash. I downloaded the new version, the decompressed files two (setup.exe and alaa200a.rom), quit all running programs and disconnected from the internet and launch the setup.exe.

  After a program window apperared and it starts automatically check my bios version (strange thing - cooler system started working with maximum RPM) and after 5-10 seconds, this window became blink and at the top, there was a message 'no response '.

  I thought that it is ok and I expect about 15 minutes for a result...
  But I suck. I closed the window and tried to restart, but suddenly I got a white screen.

  I disabled a camputer in now the power button / stop.
  And after that I can depend on to it - I press the power button, then a power led lights and that's all, blinking screen, no response.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• BlueScreen on Satellite L300D - 13 H so that the installation of Windows XP

  Hey everybody!

  First: I have a laptop Satellite L300D - 13H.

  I wan't to downgrade my laptop Vista SP1 for Windows XP SP3.
  After the Installation of XP loads the driver for the hardware and wants to start the installation, an error message is:

  * A problem has been dedected and windows has been shut down downto prevent damage. *
  * for your computer

  * If this is the first time you've seen this Stop error screen, *.
  * Restart your computer. If this screen appears again, follow *.
  * the following steps: *.

  * Check for viruses on your computer. Remove any newly installed *.
  * hard drives or hard drive controllers. Check your hard drive *.
  * to ensure that it is correctly configured and terminated.*
  * Run CHKDSK /F to check corruption from hard drive and then *.
  * Restart your computer *.

  * Technical information: *.

  * STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000) *.

  WHY? I hope someone can help me!

  Oxford

  You have problems in Windows Vista, or you have only this problem to the installation of Windows XP?

  Load the driver SATA when you try to install Windows XP? I think you need SATA driver for install Windows XP.
  You can download it at Toshiba: http://eu.computers.toshiba-europe.com-online support => Toshiba download drivers

  I read the error and I think that it might be a problem with your HARD drive.