Satellite A200 - beep code unknown

Similar Questions

• Satellite A200-1The - peripheral unknown in Device Manager

  I have the suite listed under question marks in my device manager:

  ? Multimedia controller
  ? Network controller
  ? Unknown device

  I installed the sound and it works
  I installed the network card and it works

  What are the above devices?

  Stand by. Which operating system you are trying to configure?

  Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
  Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed.

• Upgrading RAM in the Satellite A200-1WR

  Hello!

  My laptop is a Satellite A200-1WR, code PSAE3E-05J01CCE, including 2.048 (1,024 + 1,024) MB RAM memory.
  I wonder if it is possible to upgrade to 4 GB memory
  In the specifications, it is said that the maximum expansion is 2 GB.

  However, I don't know if 2 GB is the maximum expansion for each slot, it is possible to have two modules of 2 GB each, or the motherboard was held 2 GB total.

  Thanks in advance

  Unfortunately, this model of laptop can handle with 2 GB of RAM only.
  Sorry, but move to 4 GB is not possible.

• Satellite A200 - Webcam disconnected message 'unknown device '.

  My integrated webcam has stopped working. I downloaded and installed the latest driver available (Chicony 1.7.115.0213) but still does not work the camera. When I run the software assistant camera it tells me that the camera is disconnected. On the other hand, there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera. I tried Googling the issue or search in this forum but I have no answer. I would be really grateful if anyone can help me find a solution. Just in case, here is my PC details:

  Satellite A200-1DY
  Intel® Core 2 Duo
  Code: PSAE3E-01F00GSP
  Windows Vista Edition Home Premium
  Service Pack 2
  32 bit

  Thanks in advance!

  Victor

  Hello

  > On the other hand there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera

  Yes, it could be the internal webcam.
  Seems that the driver has not been installed correctly.
  What to say; first remove the old webcam software from the system.
  Then clean the operating system using a tool like CCLeaner, for example.
  After that, go into Device Manager and remove the unknown device.
  Restart the unit.
  Reinstall the webcam software and check if the device has been recognized again.

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• Satellite A200 - unknown device after installing XP

  Hello.

  Satellite A200 PSAE6E.
  Install Windows XP instead of Vista.

  Everything well instead of a thing. Device Manager indicates PCI Memory controller is peripheral unknown and showed the symbol of the brand in question.

  What could do? I think I installed all the drivers that were possible to download from Toshiba support.

  Any suggestions? Really appreciate it.

  Peace!

  You will never find a driver for XP PCI memory controller.
  This material is only supported by Vista and so you can ignore this yellow exclamation point.

  Furthermore, cela I found on the Toshiba site:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

• Satellite A200-1O5 - beep at startup

  Hello

  My satellite makes sometimes a few loud beeps when starting the Bios for about half a minute.
  After that, it starts to boot the OS (Vista) without any problem.
  But something must be wrong (because of the beeps).

  What could this be?

  Thank you very much.

  Gerd

  Hello

  If a stuck keyboard key it can cause these beep codes you have spilled something on the keyboard in the past?

  Everything works correctly if Windows has started, or do you have other problems too?

  As already written Akuma I recommend you contact a service provider authorized too. Guys can check your laptop because it is difficult to say what part is affected without exact diagnosis and it is possible that professional people. You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• 3 beeps on startup satellite A200

  Hello

  I have a Satellite A200 E-530 (Core2duo T5300) began to my laptop went blank when turn on and it emits 3 beeps and a few beeps 2 times. I have check the Rams are quite good.

  I found that the cpu fan is not moving and turn it on and sometimes the fan will start to move slowly until some time the fan will spin until it goes to full speed and when I turn and turn the beep disappear and the laptop back to normal.

  But after a few days and never happens again anywhere.

  Some experts may give some ideas what is happening on my laptop, it is about 3 to 4 years of age.

  Thank you

  Have you ever cleaned?
  Your laptop is hot after a short period of time?

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• Unknown device (TOS1900) on the Satellite A200

  Hi, I use Satellite A200 PSAE6E
  I installed vista 64-bit.
  When I look in Device Manager and select the option 'show hidden devices '. I see an unknown device.
  I tried to get with it, but I couldn't find anything, you know what?

  ACPI\TOS1900
  * TOS1900

  Hi friend

  theres another post with the same question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31190

  the discussion is about this device. I guess this could really be something like the HARD drive acceleration sensor (the sensor that parks the disk heads HARD when the machine is moved faster then usual).

  Maybe then it's a device that can be left since you won´t get the drivers for it. Another good option would be to google for this error...

  Greetings

• Satellite C650D - 10K does not start, that means this beep code?

  Hello

  My friend spilled tea on his cell phone, after dry at first, it worked, but now at startup it sounds right: 3 long, 2 short, 3 long and short 2.

  I can't find beep codes documented anywhere, but if someone can tell me what this code is that I can at least decide whether it is worth trying to recover or clean the motherboard with isopropyl alcohol!

  I tested the memory on another laptop and it's good but I can't really test the CPU, or anything else.

  Thanks in advance

  Hello

  The beep code appears especially if the POSITION cannot be passed correctly.
  If the problem is detected until the BIOS initialize the video card and the code cannot be displayed on the screen of the BIOS will play several beeps.

  Each BIOS supports the meanings of the own beep codes.
  For example BIOS Toshiba beep code is not the same thing as "beep code" Phoenix BIOS.

  As far as I know the Satellite C650 supports a Phoenix BIOS.
  But the BIOS is changed by laptop manufacturer so it would be possible that the beep code are different.
  However, you can try to search in the internet for a description of the code.
  I found this site:
  http://www.bioscentral.com/beepcodes/phoenixbeep.htm

  But in general these problems can be solved easily.
  I recommend you contact a technician with experience huge book to analyze the material in terms of fault possible.

• Satellite A200 - error when using fingerprint code

  Hello

  I have the Satellite A200 with Windows vista 32-bit, when I try to log in through the finger scan, I got the massage (error code oxe 7210001 (an internal error has occurred (shared: encrypt cryptopp(StreamTransformationFilter: invalid PKCS #7 block padding found)).))

  Can someone help me?

  Thank you

  Hello

  I m not an expert with this tool of fingerprints, but I noticed here in the forum that the relocation of the fingerprint software could help get rid of this problem.

  According to the Web of Toshiba site, the new fingerprint software is version 5.8.0.4024.
  You have installed? Otherwise reinstall the software of fingerprint and test it again.

• Satellite 3000-514 does not start - 1-1-1-1 beep code appears

  Hello

  http://forums.computers.Toshiba-Europe.com/forums/images/bn_preview.gif
  Overview

  My Toshiba Satellite 3000 514 starts each others time and gives me the following beep code: 1-1-1-1 (4 short beeps) and a black screen.

  Does anyone know what this means?
  This happens roughly every second time I try to start the PC. After l ' works again, it especially works again.

  Any ideas?

  Thank you!

  Hello

  The beep code appears especially if the POSITION cannot be passed correctly.
  If the problem is detected until the BIOS initialize the video card and the code cannot be displayed on the screen of the BIOS will play several beeps.
  Each BIOS supports the meanings of the own beep codes. For example BIOS Toshiba beep code is not the same thing as "beep code" Phoenix BIOS.

  To my knowledge the Sat 3000 using Phoenix BIOS. In this case, you can try to search in the internet for a description of the code.
  I found this site:
  BIOS beep codes

  But generally cannot solve this anomaly just average and I would recommend contact a technician with huge experience computer laptop.

• Satellite A200-1AI just beeps at startup

  Satellite A200-1AI (PSAECE) does not start, only 4 beeps: a little long and 3.
  Help, please

  Hello

  I think, there is a video card failure, that is why the laptop can not start. The video card is integrated into the motherboard, and you have to replace the whole motherboard

• WXP on Satellite A200 - 1 M 7 - now I have 4 unknown devices

  Hello!

  I had problems installing Windows XP SP2 home edition on my Satellite A200 - 1 M 7.
  Vista comes with this laptop, but I decided to go back to the roots.
  Downloaded all the drivers available for this model and install.

  Now, I have 4 unknown devices in the hardware monitor.
  I guess I know what it is because I still don't see things working:
  1. audio card: update done BIOS, installed kb888111 and kb835221 and sound driver. No change.
  2 Bluetooth monitor: installed the driver but also no change.
  3. WiFi: the same thing, I can see the window manager of Atheros Wi - Fi, but it does not work (I am sure about that because I have another laptop nearby, and he sees my Wi - Fi router).

  Does anyone have these problems and how to solve it?

  Very simple procedure ;)

  The Satellite A200 - 1 M 7 seems to belong to the series PSAE3E and you should switch in this series to download all the drivers from Toshiba.

  Before you install the try XP updated the BIOS to the XP version (at this time v.5.30 - victory)
  Then check install Instructions txt file and install all THE drivers Toshiba and tool using the order mentioned in the present document.

  Please note that Windows XP should be updated to the State and several important fixes must be installed directly on the Microsoft site.
  So I would recommend checking the MS Update site and install every difficulty.

  By the way;
  Bluetooth monitor is not the installation of the driver the driver Portal Toshiba BT BT:
  http://APS2.toshiba-tro.de/Bluetooth/

  All Wlan driver can b found here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver Sound is also located here:
  http://www.Realtek.com.tw/downloads/

  Best regards and happy new year