Satellite A210 - 11 c PSAEG: Vista SP1 - USB mouse no longer works

Similar Questions

• USB mouse no longer works on laptop Samsung

  I recently bought a USB Wired mouse for my laptop Samsung RV515, running Windows 7 Home Premium, but after only 2-3 months of use, she decided suddenly cut today and stop working. When he broke down the red light blinking and turn off all the seconds, and then finally he stops flashing and does not at all. What happened in three USB 2.0 ports to your laptop. I then tried to restart the laptop to see if the mouse wouldn't work, but it did not work after restarting. I also tested on another PC in my house, but it also did not work on this point, confirming that the mouse was a little broken and useless.

  I had the same mistakes with two previous mouse in this laptop, one of them only a week.  I don't know if mice are just not reliable because they are cheap to a local supermarket in the United Kingdom, if my USB drivers are defective or need an update late ones.
  Please can someone diagnose me the problem? And if it's a driver problem, is there a way to update?

  You crossed 3 mouse on this laptop? You should get the voltage output checked on your USB ports.

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

  Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

  Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

  Thanks, Shoko.

  In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

  Laptop mouse pad still works?

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A200 - 19K: double keyboard lights up and the mouse no longer works

  Hello

  I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
  I can't find why it does this in the manual and what is the purpose of light with symbols on it.

  The symbols have a purpose. Thank you very much

  Hello

  As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad

  The dual-mode tablet buttons provide many different functions such as:

  1.) button to -> it toggle cursor mode and the mode button.
  When you switch the button mode button flashes blue and the mouse does not work

  (2.)-> volume button increases or decreases the volume of the speakers and headphones

  (3.)-> e-mail button starts you mailbox to receive and send emails

  4.) button ConfigFree -> starts the ConfigFree tool

  5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery

  The other three buttons to the bottom of the trim can be configured with different functions.

  Please refer to the properties for pad synaptic dual for more details!

• None of my USB ports no longer works

  Original title: activate the usb port

  Suddenly, the usb ports no longer work.

  Used a recoverypoint, but did not help

  Remove all usb ports and new discovered computer and installs but no result.

  There is power on the ports becase that a usb fan works

  What to try?

  Hi JoopSteenhuis,

  Try the methods and check the results below:

  Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

  f. restart the computer, and then reinstall the USB controllers.

  g. plug in the removable USB device and perform a test to ensure that the problem is solved.

  You can also see the following article for more information:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

   

  I hope this helps.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

  My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

  Original title: hardware device

  Hello Neale,

  Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

  Let me know if one of them might be your problem.

  Kind regards

  BearPup

• Re: Boot Manager is missing on the satellite A210-15Y with W Vista

  Hello world

  I have a serious problem with my laptop Satellite A210-15Y. For two weeks I bought it. Yesterday without warning, I had opened a window to Internet explore and all of a sudden, I got about 20 Windows IExplorer. I stopped it with the Task Manager and then I looked for the update that updates to Windows Vista.

  After I installed all the updates again, I received a black with a message as screen "Boot Manager is missing, press Ctrl + Alt + Delete to restart» Excuse me for my English. I can explain my problem better in German or French. Please help me.
  Best wishes
  Franky

  Hey Franky

  Can you start / restart your laptop properly?

• Satellite A210-19 f - why Vista on Turion 64 bit 32 Bit

  Hello
  Why don't I have Vista 32 Bit with my laptop Satellite A210-19 f which has turion 64?

  Hello

  > Why don't I have Vista 32 Bit with my laptop Satellite A210-19 f which has turion 64
  Why not?
  Most of the new Intel or AMD processor supports 64-bit technology and most computers use the 32 bit OS win.
  There is no performance difference between the 32-bit OS or 64 bit OS.

  OK there is a difference the 32 bit OS can use 3.2 GB RAM max. ;)

• Differences between Satellite A210 - model 11b PSAEGE and PSAFGE

  Hello

  Is there a difference between Satellite A210 - 11 c model PSAEGE and model Satellite A210 - 11 c PSAFGE? I have a model PSAEGE and I need the XP drivers. I found some useful for model PSAFGE drivers and I don't know if it's ok to install.
  Thank you very much!

  Can you please tell me where you've created all of these useful drivers?

  Sorry, but according to all possible documents, I found on the Internet by Satellite A210 - 11 c is certainly PSAEGE and I didn t find with PSAFGE part numbers. When you picked up that info?

• Win XP drivers for Satellite A210 - 11 c (PSAEG)

  I'm looking for XP drivers for model A210 - 11 c (PSAEG)... You have an idea?

  Or can someone help me?

  Sure you can use the drivers Windows XP of the PSAFG model. Visit the Toshiba download page and choose this template.

• Recovery for Satellite A200-21dts DVD includes Vista SP1

  Hello

  My recovery DVD does not work... and I noticed this new download service, and my question is...
  Is - this this new recovery DVD come with the Vista SP1 already installed? and it comes with the latest drivers and utilities?

  Thank you

  Hello

  I don't know about you, but I'm sure that you get just copy. This means that you got the recovery as well as the original. The original is designed maybe a year ago and at this stage the SP1 was not available.
  I think you have OS without SP1 and with the drivers, tools, and utilities that was available at the moment.

  When you install the operating system, you can get info about the version of each Toshiba utility and you can install the latest versions. You can find it on the Toshiba support page.

  To be honest you don't need all that. Package of added value is important. Remove the other preinstalled and install later the Toshiba download page. I did the same thing.