Satellite A210 - 11 p - cannot get the camera to work

Similar Questions

• Satellite A200-AH7 - how to get the camera program?

  I installed Windows 7 today and now the Chicony Webcam does not work. I've updated the drivers and the software for the Toshiba for Windows 7 download site, but nothing happens when I click on camera assistant. I tried to run the compatibility program, and he tells me that the program is not compatible even tought that the software is for Windows 7.

  Any ideas on how to get the camera to run program?

  Thank you
  Gary

  Sorry my mistake, the camera assistant was hidden.
  Of work.

  Post edited by: gary blainville

  > Sorry my mistake, the camera assistant was hidden.
  > Work.
  This means that your webcam working properly now?

  If so it of great and thanks for your comments! :)

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• Cannot get the sound to work on my hp mini computer

  I seems that I can't get the sound to work on my laptop. I ran several updates and also tried troubleshooting. can someone help me!

  Re-post with the following info: laptop, name and model number.

  Or if you, re - install your audio drivers (on the site of manufacturers of laptop or any CD you provided with the unit).

  See you soon,.

  Jerry

• Cannot get the remote to work

  Hi guys,.

  I've just updated my Visa dv5 Pavilion to Windows 7, I can't now get the remote to work. I think it's a driver problem, Device Manager, says the driver works correctly, but I don't know if the driver is compatible with W7. I don't know where or how to get the appropriate driver.

  Any ideas?

  MORGs says:

  It is a Pavilion dv5 1110em running Windows 7 32 bit.

  Thank you!

  Here is Windows 7 32 - bit ENE CIR receiver driver you need for your remote control.

  Best regards

  ERICO

• Satellite P200-1EE - cannot get the camera to start

  After plunging through the forums, I noticed a lot of people have had problems with their bed with web cameras.

  Before that the camera was just in a bad mood, for turning on and off indicating other applications had locked its use (when they n even on t, not even in the background), but it has stopped working.

  I managed to uninstall the camera driver and download the version of Vista to the Web site. The software seems to have installed fine, but when you start the program it says "activate camera" and even by pressing the shortcut keys, I can't the camera to begin with, just the software with a gray screen.
  I checked Device Manager and not its use.

  Help please! I don t want to have to go out and buy a new camera.

  Hello!

  I have two Toshiba laptops and no problem with the webcam. The two webcams work fine and without problems.

  Have you downloaded the driver from the Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Perhaps a BIOS might also solve the problem.

  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

  Good bye

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Satellite L300: problems trying to get the CD player work

  Currently, I have a Satellite L300 unit and have problems trying to get my CD drive work.

  Recently, I deleted the cd player, completely by chance instead of a printer.
  Now it won't reinstall and no update driver makes no difference.
  Anyone have any ideas?

  First of all, try to restore Windows back to a Restore Point prior to a date before the problem occurred. System Restore is in the start menu-> programs-> Accessories-> system tools

  Then try to remove the CD/DVD filters in the registry, and then restart. Windows should find the CD Player automatically, unless the registry has been messed up.

  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

• Cannot get the unit to work in Windows 7 and Ubuntu 64-bit

  Running Windows 7 Professional 64 - bit Ubuntu 10.04.1 64-bit host as a guest.  After installing and upgrading everything (including VMWare tools) when I try to enter the unit I get the following error:

  The virtual machine cannot be set to Unity mode.  Check that the unit is supported for this guest operating system and the latest version of VMWare Tools is installed.

  This forum works on a Thinkpad T410S with turned on VT.  I also tried with Ubuntu 32-bit and the same problem occurs.  I have attached my vmware.log.  I also closed and restarted the host and the guest.

  Thank you.

  The authorization service is part of the process, although if this

  the service is not performed, a player will say that it is the cause. But to

  check, run "net start vmauthdservice" a high command

  fast and see if that gets the service runs.

  If services

  works OK and the connection is still blocked, so you

  disable, remove, or update any software is blocking.

• Cannot get the USB to work HP G6-2278dx

  My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)

  I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)

  I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.

  I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  and or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

  I'm working on a laboratory configuration to prepare application a client driver 3.0 with 10.5SU1 of the Complutense University of MADRID.  I have the base line everything up, but I can't get the Ad Hoc conference bridge to enroll at the University Complutense of MADRID by the conductor, nor I can SIP trunk to become accessible.  This all points to a TLS problem, which is reflected in the newspapers of the Complutense University of MADRID:

  Pre-verifie SdlSSLTCPListener::verify_cb = 0, cert check errno = 20, depth = 0
  00269848.000 | 22:41:54.023 | AppInfo | HandleSSLError - verification of the certificate has no:(Verification error:20)-Impossible to get the certificate of the local radio station for 10.0.0.113:41409

  This repeats for the Ad Hoc and appointments of the intellectual property on the driver.

  I followed the conductor with the guide of the AAU (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) as well as the deployment of certificate (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) guide.  I have a root certification authority I use (lab.local), I installed the root certificate and the certificates of the host on both devices.  OpenSSL gives me the verification of the return code: 0 (ok), at once UCM and conductor during validation to the root certificate.

  I think that I followed the guides and double-checked against them.  Someone else has seen this? What Miss me?

  Hi Ryan,

  I think that I am running into the same question... The TAC engineer gave you a bug ID I can follow?

  Thank you

  Peter

• Cannot get the backslash to work on the keyboard - HP Pavilion dm3

  Hello

  For some reason, I can't get the backslash key to work on my keyboard. Whenever I try to use a backslash I get the following symbols

  -that if I simply hit they key #.

  -or maybe this if I use shift ~.

  The hash symbol is actually located above the number three on the keyboard, when I get over that I have £

  I am at a loss as to why my keys are everywhere!

  Someone at - he had ideas because it drives me crazy!

  Thank you

  Hello

  This is generally what is the problem. This is the bad loading keyboard mapping. I have the same hassle from time to time between the English) and Dutch languages that are installed in my BONES.

  Try adding American English (International) to the language bar.

  Best regards
  ERICO