Satellite L300: problems trying to get the CD player work

Similar Questions

• Satellite L300 - where can I get the Toshiba Recovery disk?

  I have the same problem! I bought my Toshiba Satellite L300 a month ago, but the Windows Vista recovery disc was not included in the package. Y at - it an option to backup or recover the Windows operating system, just in case I need to reformat my laptop?

  Hey,.

  I read the user manual, you would know that you must create a Toshiba recovery disc yourself then please consult your user manual!

  And here you can learn more about the recovery of a laptop:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• Satellite L300/BCI: How to get the Microsoft Office 2007, Google earth, etc.

  Today, I bought one of these laptops Satellite L300/BCI
  When I turned it on it took about 5 minutes, make an installation after a while I accidentally pressed ESC while piking he then restarted the computer
  as soon as switched on, it worked but it was missing:

  -Microsoft Office 2007
  -google earth
  -Google Toolbar
  -Google Desktop
  -Google Picasa

  Is their anyway for me to get these programs back?

  Any help would be appreciated!

  Hi mate

  Just a question; are you sure that this application must be installed on your laptop computer at 100%?
  It's really hard to imagine that you have removed or deleted from the disk only by pressing the ESC key

  But if these applications have been pre-installed, so you should be able to get back the system restore to factory settings.
  I mean by installing the image of Toshiba.

  It seems that it is an Australian model of laptop. Is this good?

  Well, I'm not quite sure how it works on Australian laptops, but I think the procedure should be explained in the manual of user m! Check it!

  But in a few discussions such procedure has been explained and some have said that you must press the 0 key immediately after switching on laptop.

  However, manual control of the user, then you would be 100% sure how it works!

• Satellite L300-1AS - where to get the boot floppies?

  Hello

  I managed to lose my floppies to start for my Satellite L300-1AS, someone at - it an idea where I can buy a new one?

  Thank you

  Hey,.

  I assume you mean the Toshiba Recovery disk... Right?

  If yes you can order a new Toshiba directly by clicking here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite L300 - where can I get the recovery utility

  Hello

  I have the Satellite L300 laptop with the reinstalled Windows 7.
  A year ago, I installed an original Version of Windows Vista, but I created a Windows 7 recovery disk.
  I recorded all of the files on another partition recovery, but I need the recovery utility to create the installation disk.
  Where can I find this utility?

  Thanks in advance

  Hello

  You can not download it.
  The Toshiba recovery disc creator is preinstalled and you should always create the recovery disk before you change the operating system or anything on the HARD drive.
  Save files to another partition recovery won't help you because the recovery disk creator Toshiba will not recognize it

  Now, you will need to order the recovery disk if you want to recover the computer laptop s factory settings.

• Satellite A210 - 11 p - cannot get the camera to work

  Hey

  I have the Satellite A210 - 11 p and I can't have the camera to work on it.
  It will be yurn on during two seconds and then shut off and 'Preview of No' appears.

  Any help on this would be greatly appreciated.

  Kris

  Hello

  Have you tried you for reinstall or update it? Download camera assistant of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] delete the previous class, and then restart the laptop. Then install a downloaded

• Trying to get the Brazilian keyboard work with Windows 7

  I just got a new computer with Windows 7, and I'm trying to get a Brazilian keyboard to work with her.  My old computer has XP, and this same keyboard worked fine.  I created another one for when I was using this keyboard, and he'd let me use all the keys (I don't remember what was the keyboard layout I used).

  When I try and configure it with Windows 7, however, there is no keyboard layout that corresponds to my layout.  ABNT and ABNT2 options are similar, and both are missing two key.  My keyboard has the-to the left of the z and the / right of;  Is there an error with the way Windows 7 has implemented one of these keyboards?  Thank you.

  I just bought a windows 7, but before the case was made I said guys from dell, I needed a computer with Brazilian keyboard. also i paid 50.00 dollars more and they have installed the software to change the language of the computer to the Portuguese. Here's the deal, professional window 7 or windows Ultimate edition, you will have the layout and language... to make it work perfectly. Now if you want to get the layout of the keyboard and language on the regular windows 7 all you have to do is go to microsoft.com and download it. hope it will be useful. you will need to find a way to use the keyboard, codes may be an exercise. but in a day or two, you'll discover. Remember to make all updates as soon as you buy a computer. After you set your PC and all new updates start popping up, just download each important updates. all this information was passed to buy me no one selling Dell.

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Satellite L300 - problem reading memory in the slot/Bank 2

  Hello.
  I have a Sattelite L300 with 2 * 1 GB memory which had strange problems of som.
  Among a large number of tests, I tested the memory inside.
  When there is a module of memory installed in slot/Bank 2 (the one closest to the bottom of the pc)
  I get an error. Bought a new module, but I still have an error, so the error must be with the Bank/slot.

  Tried cleaning the connectors of slot with a brush-glass, without a bit of luck.

  The pc works perfectly (but slow), with 1 GB installed in the slot/River.

  Can someone help me with this problem?

  Concerning
  Jens (Denmark)

  I agree with Akuma.
  If two modules don t work in the second slot but in the first place, then the second slot is defective and that means this motherboard must be replaced.

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

• Satellite E100 - How can I get the keys to work?

  Help!

  I can't understand how to use key features. For example sometimes when I try to do a question mark, I get an A? (such as these).
  How to return to the Marka question? (see, there, he'll once again).

  Hello!

  It s also according to the keyboard language how to do a question mark but if you want to make one you have to press the SHIFT key, then you should be able to make a. On my keyboard, the question mark is on the same key as the key apostrophe.

  The FN keys you can use if hold down the FN key and press an appropriate key.

  Good bye

• MY BB BOLD 9000 blackBerry smartphones would not be lit after trying to get the wifi to work... Please HELP!

  Please help me!

  My Wifi has not worked for about 2 weeks now.  Today I tried to turn it on, he kept saying that WIFI NOT in MEASURE TO PUT ON.  So I tried again, and all of a sudden the unit just turned off.  NOW, IT DO ' T TURN back IT. "  Please I really need my phone work...

  Anyone out there can HELP me... !!!

  First thing to try: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

• My pdf reezes when I click on COMMENT. I'm trying to get the tools to edit a pdf file. If I use the tools on the toolbar, there is no problem, but as soon as I click on the COMMENT, the document hangs and I have to open the Task Manager to plant it. It st

  Sorry, I'm new to the type of problem-solving process, and I don't know how to change my first speech. My true statement is less to:

  My pdf freezes when I click on COMMENT. I'm trying to get the tools to edit a pdf file. If I use the tools on the toolbar, there is no problem, but as soon as I click on the COMMENT, the document hangs and I have to open the Task Manager to plant it. It started in the last seven days (3.31.15).

  I responded to your questions below, BUT while I was looking for properties, I found repair service REPAIR the INSTALLATION of ACROBAT, and (this is) the issue has been resolved!

  Thanks for making me look for information.

  Karen

  I use Acrobat Pro XI, version 11.0.10.32.

  I created the file, that I worked in during the freeze, so I tried a PDF I created with Adobe and it also freezes when I click on COMMENT. I discover that the OBSERVATIONS of the plug-in is loaded. (See image

  I used the REVIEW for years without this problem occurring. He started in the last 2 weeks.

  I could not find real estate under the file menu, but found a security setting in the preferences in the Edit menu. It doesn't have a way to allow/disallow COMMENT.

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium