Satellite A210 - 14 d go on a black screen

Similar Questions

• Satellite Pro P300 - 13 m - boot problem: black screen with 3 beeps

  Hello

  Satellite Pro P300 - 13 m, I bought a few weeks ago and in time, I had about 5 - 6 times the same rear screen when I tried to start the system. When he does this notebook gives 3 loud beeps (not sure what that actually means).

  When he does this I have to press the power button for 5 seconds and after several times doing this that it will show the Welcome screen toshiba... then sometimes it will automatically restart again and I get this annoying black screen again. Most of the time when I wait about 10 minutes and try to do as well the system starts as usual... Yes... very strange thing here.

  To be honest, I don't want to send the laptop for Toshiba once again, as I could use for my business...

  Then. What could this be? I've already updated the latest version of the BIOS.

  Thnx in advance

  Carl

  Hello Carl

  I have the Satellite Pro P300 (PSPC1E). I installed Windows XP Home edition and my Vista. Use the two operating systems with success and everything is OK.

  What operating system do you use?
  Have you noticed that on the first day?
  Your laptop is placed correctly on the desktop without cooling vents?
  When you start Notepad you see every time that Toshiba welcome screen?

• Satellite C660/C6600 stays on a blank black screen

  My Satellite C660/C6600 fails to load and once it is turned on it goes straight to a blank black screen after screen toshiba.

  I can't access any menu, when using F2, F8 or F12, Im not sure that it is, but any help would be appreciated gratefully.

  Hello

  > My Satellite C660/C6600 fails to load and once it is turned on it goes straight to a blank black screen after screen Toshiba.

  Because this means that you can see the Toshiba splash screen at the start then the screen turns white?
  You see something on the external monitor? If you didn t test this situation, please do

  I don t think that the display is affected, since you can see the Toshiba homepage
  Not sure about the GPU but I think is GPU would be affected, then the Toshiba start screen would not be visible too. In your case, it is

  Well, try this work around:
  -Remove the battery and AC adapter
  -Press the power button / stop along 30 sec
  -Bring the two parties together and try to turn on the unit.

  You can also check if one of the memory modules may cause this
  In this case, you must remove a module and must test the laptop using a module in each slot

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Satellite U500-1E0 - Webcam shows only a black screen

  Hello world

  I have this problem, my webcam does not work. It has a blue light which indicates that it is running but it only shows the black screen. I tried to update software, uninstall, reintstalling once again, but nothing helped. I even downloaded a new driver from the Toshiba Web site but nothing.

  Please, does anyone have a any solution to this problem?

  My laptop is Satellite U500-1E0

  Thank you
  E-mail: [[email protected]]

  Hey,.

  If the webcam shows just a blank screen, I could imagine it's just a setting incorrect webcam.

  On the Web from Toshiba site, I found a helpful article that I think:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Satellite A210-1AO: sometimes the colors on the screen become unnatural

  Hello. I have a Toshiba Satellite A210 1AO two months ago and collided with a following problem.
  Very rarely (once a week) on the screen colors become suddenly against natural.
  The problem even if it means opening / closing of coverage.

  Really the material damage?
  The problem is rarely enough.

  Hello

  I m an owner of a portable Satellite A210-10Y but I didn t notice a similar problem; running under Windows XP OS or using the Vista.

  I don t want to publish stories great but perhaps that the problem of color could be linked to the issue of the material.
  Maybe part of laptop as displays, FL-ups or graphics card would be malfunctions

  In my view, a check of laptop would be useful and I recommend you contact the ASP.
  If your warranty is the replacement of any piece of material must be covered by warranty.

  PS; Updating the graphics driver, what would you say? Did you use the latest graphic drivers Toshiba?

• Satellite M70 - 350 - recovery disk stopped with black screen

  Hello

  I tried my laptop with the original recovery CD or DVD recovery. He just stopped with the black screen and the error message.

  After that, I tried the advanced recovery mode. By selecting the ghost Image, which gave me the Image corrupt error.

  Weird enough even installing from an original CD of Windows fails. With that before even I can select something, I get a black screen with a blinking cursor. Appers whil the windows cd is loading drivers.
  At the bottom of the screen, there are that many drivers listed one after the other. The last thing mentioned here before the blinking cursor is Partition NTFS.

  Cause the original recovery disc has already deleted all the contend on the laptop it's usless now.

  Any ideas what the problem might be?

  I also think that there is a problem with the HARD drive.
  If possible, try to get a new one and try installing the OS using recovery media again.

  Do you use DVDs of recovery for the first time?

• Satellite L845-SP4303: win 8.1 - got black screen after account manager

  Hello! How are you?
  First of all, I apologize if my English is bad.

  Well, I'll tell you what happened.

  I have a Satellite L845-SP4303FA and I installed Windows 8.1 store yesterday.
  The installation took a lot of time, and the laptop was connected to the electric power with the AC connector during installation.

  Installation was successful, and when it was finished, I disconnected laptom of electric energy.
  I used the laptot without problems, Windows 8.1 worked very well, and when there is no more battery I turned off laptop.

  And here's the problem:
  Today, I turn on the laptop, one of the Windows accounts is automatically loaded and later, the GET black sceen forever.

  I am able to move the mouse, but I can't do anything.
  I can't use the keyboard, I tried Ctrl + Alt + Supr to impulse, but it's impossible.

  Is there a possible solution?
  Thank you very much!

  Hello

  Turning the unit off.
  Disconnect the power adapter
  Remove the battery
  Press and hold the power button / stop along 30 sec
  Leave the laptop disconnected for a while (3-4 hours)
  Connect the battery and AC adapter and turn on the device

  You see something on the screen now?

• Satellite L50-A-170 - no boot and black screen on startup

  Hello

  I hope you can help me.

  I have a Satellite L50-A-170 for about a month.
  Today, after 3 days of inactivity, I tried to turn it back on but you can hear noise from the optical drive and the noise of the fan, but the screen remains black.

  It seems to me that you do not even the backlight of the display. I tried to disconnect the battery for a few minutes, but it is integrated.

  You have an idea on how I can proceed?
  I need the PC and data!

  Thank you in advance!

  > It seems to me that you do not even the backlight of the display. I tried to disconnect the battery for a few minutes, but it is integrated.

  For this reason, there is a * reset switch * place the bottom of the unit.
  The detailed image can be found here:
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

• Satellite A200 (PSAE0C-AH308C) - after the BIOS black screen update

  Hello

  I have a Toshiba Satellite (model No. A200; Part No. PSAE0C - AH308C) and to install Windows XP on a version already corrupted Vista (which had 4 partitions, that have been corrected, erased, then reformatted in a solid block). Now, I have installed all the appropriate drivers off Toshiba Canada support site...

  Everything worked, but I wanted to see in Windows (since I just got this computer) if everything was in place and working normally until I installed Ubuntu... Then I did the update to the BIOS flash. The program is supported in two formats, one for Vista and one for XP... for XP has a more high at 5.20 and Vista BIOS version the 1.80 revision of BIOS... that are marked as being updated by the Toshiba site. I opted to download the latest version of the BIOS.

  Things got ugly as soon as I unzipped the self-extracting program. First of all he said he could not find a .dll file (even if it is clear from there), so that seemed as if it started to Flash the BIOS but has not finished (it was just what happened when I opened the program)... I think he got to the ROM of compensation but did not have any code in there... Windows attempted to close the program because he did not respond, and I tried to take the program... had the same .dll error, but this time, the screen of the program was just gray...

  Given that this program is not Flash the BIOS unless the user selects the button "Flash BIOS", I have reason to believe that it was a bug in the program, or a combination of it and Windows comes to interfere (no program were running at the time, while he was supposed to be a dedicated flash). I can only flash in the Win.

  Now, I rebooted the computer, twice... the screen turns black, the HARD disc spins, the DVD drive has done his usual clicking sound when the computer starts, but it seems to stop as there is no BIOS entact.

  Can I replace the BIOS chip? There is no way for me to access the BIOS at all.

  Thanks for any help on this

  Thank you & best regards

  Muhammad Asif
  Manager

  THE COMPUTER HUT

  Center of the screen:
  F-115 trade place treat Saddar Karachi.
  Branch:
  G-31 place of trade treat Saddar Karachi.
  Headquarters:
  711-712 treat Trade Square Saddar Karachi.

  Tel: (+ 92-21) 2765359, 2734131 (Ext) 601
  Fax: (+ 92-21) 2724968
  Cell: + 92346-3277193
  E-mail: [email protected]

  Hello

  Unfortunately, the BIOS update has failed and now BIOS is damaged. For this reason, you cannot start and use your laptop. I agree with Luke. Please contact nearest Toshiba authorized maintainer and ask for help. Talk with them and I am sure that you will find the best solution to this problem.

  Satellite A200 is quite long on the market and it is hard to believe that updating the BIOS on the Canadian page may have a bug. All updates are tested and used by millions of users and service providers. If there is something wrong, I do not believe that this update will be available on the page of public support.

  In any case, contact the nearest service provider and explain the situation. Believe me this is the best thing you can do now.

  Good luck!

• Satellite A500 - display driver no longer Flash black screen

  I brought my Satellite A500 2 weeks before and never since sometimes and sometimes worst the screen go black, back and I get an error message in the lower right part with the following: -.

  Display driver Nvidia Windows Kernel mode driver 187.98 Stopped answer and has successfully recovered.
  Now, I've updated the driver but the same problem is present and the same message error but instead of 187.98 I get 197.16

  Has anyone fixed this problem or is it a problem that Toshiba has need of fix and quick as I am not happy.

  In my case, I was able to resolve this problem, download a map graph to nvidia.com.

• Satellite S955 starts not to POST and black screen

  Hello

  I have a problem with my s955 (14 months). He is not able to start more. When turned on, I hear only the cooling fan spins up and down and nothing more. The last time, it took almost half an hour to work around this failure. When turned on it shows no problem at all. When you stop it is better to pray. It now seems to be missing. After an hour, I see no sign of life except cooling fan activity.

  I went through all the stuff mentioned in another forum of Toshiba as turned off, remove the battery, keep and maintain the power button for at least 60 seconds. I even replaced the RTC internal Li - ion, but without success. Because it is not covered by warranty more I opened it. No sign of didn't burn except a suspicious oxidation of some contacts.

  I contacted Toshiba Italy (even if it is a U.S. model.) and I expect a possible answer next week. I ran out of the possible solution except replacement of mobo. Is there anyone around who has the same problem? Could you please give me a help?
  Thank you and best regards

  Pyder

  Hi, not Toshiba Italy news but I found a Toshiba authorized service workshop that may solve this problem. It seems that, beyond other speculations, the problem may be issued by the fuse of power mainboard (read this answer interesting of maxtek73 [http://forums.toshiba.com/t5/Batteries-and-Power/My-Toshiba-Satellite-Laptop-Will-Not-Turn-On/m-p/584008#M11147] at the end of the post). It seems reasonable. In fact, keyboard, dvd player, charge battery, hd, and cooling fan are powered by the motherboard. It seems that there is not enough current to pass initial tests before POST. This could explain why the cooling fan trying to run at maximum speed, but he can't. I had to remind that to turn on, no equipment TI push fans at max speed and then slow down to normal speed before entering the POST process. I'll have a conversation with the technician of the workshop and I'll keep you in the loop.
  Best regards
  Pyder

• Satellite A100-646 and external monitor shows black screen

  Hi all

  I have a similar problem with A100-646 (purchased in Italy). Computer laptop LCD and monitor external display screen black but without another problem at the start of the system. When the laptop is not used for a long time (half a year) it works for a week with no problems.

  Unfortunately, there is no adequate service in a place where I live. Perhaps, there is a power problem.

  Is there another idea? Does anyone have a service manual? ([email protected])

  Service manuals are available only for the technicians of the ASP.
  Unfortunately, it looks like a hardware problem, and therefore, you should get in contact with a technician for laptop to check defective parts!