Satellite A210-19 screen goes black all of a sudden

Similar Questions

• Satellite P100 - the screen goes black

  Hello

  I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

  The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

  Any help would be greatly appreciated.

  Model: Toshiba Satellite P100-PSPA6A-02NO21
  Processor: Intel Core 2 Duo T7200@2GHz
  GPU: Nvidia Quadro nvs 510 m
  Chipset: Intel i945PM
  HARD drive: Fujitsu 148GB
  RAM 2 GB
  Windows 7 Ultimate SP1 operating system

  Hey,.

  > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
  This means that the graphics card is defective

  Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

  If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

• My screen goes black all in use

  My screen goes black, as if sleep but I can't react. Have to close and restart. Have checked the power settings and all seems well.

  I guess that you tried to shake the mouse and keys for you ensure that it is not a screen blanker.  If this isn't the case, it could be to power of 1) your screen goes out, 2) your computer video card has a problem, 3) that you have a virus or other malware.  If your monitor is longer than 2-3 years, I guess (1).  If it is not the monitor, I would like to start safe mode and do a system scan with antivirus program complete.    Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.

  If you don't find anything, I take it to a service technician and have it checked.

  I hope this helps.  Good luck.

• Satellite U920T - the screen goes black when you drag the keyboard

  This morning, I turned on my U920T-10 days but the screen remained black.

  At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

  How can this problem be solved?

  Hello

  For me, it looks like a bad connection somewhere between the screen and the motherboard.
  This could be possible reason for failure to display while sliding in and out.

  I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

  I hope that this can be corrected. I keep fingers crossed.

• Satellite A135-S2276 screen goes black randomly

  I have a Satellite A135 everything will work, and then it goes just black sreen have not seen a boss just randomly sometimes his 30 minutes later sometimes immediately.
  I updated the drivers and also plugged in a dektop and it fined all work in this way, but always turned on the LCD screen.

  All the ideas we that this could be taken to a toshiba repair place and they said that the LCD or the right of the ups under neath the screen.

  Anyone have any ideas for this grace.

  Hi mate,

  Normally, you can get all the spare parts to an authorized service provider:
  http://www.CSD.Toshiba.com > locate a repair center

  Alternative as a boarder wrote that you can look on eBay for second hand parts. They are cheaper but not new. ;)

• Satellite A135-S2326 - screen goes black

  I have an A135-S2326, one day he started to go black screen when I was on it... I would like to close the lid and reopen and it would be back on after about 20 seconds if it goes black again.

  I thought that it was done with, then I switched the rear screen and I noticed that the computer was still on, you can see the desktop icons and can still run the laptop itself for some reason that the backlight is out. It would be an updated driver, relocation, or is the screen just didn't pull any more? When I plug in an external monitor it all good im.

  I was going to try to do a system restore but last year I brought my laptop cause usb not working, they inturn screwed my motherboard trying to fix them. So they replaced my motherboard with what they said, it was the same characteristics as the former, a few months later went to do a recovery and the disc when I put pop up would be on screen system does not recognize. Called the toshiba repair place they said something about something reset to make the drive work, which i have no idea what it ment.

  Hello!

  > When I plug in an external monitor it all good im.
  Looks like a problem with the inverter LCD or FL.

  I think a recovery facility will not solve the problem because the external monitor works without problem.

  In your case I go for a local ASP and ask for a technician. They can check your laptop.
  On the Toshiba site, you can search an ASP: http://www.csd.toshiba.com

  Good bye

• Satellite A500 - the screen goes black

  My wife and I we had four weeks and is happening the same thing. Do not know why.
  also the battery lasts only an hour when the use and 2 hours when not in service.

  Hello

  With regard to the problem of black screen.
  You must visit the page of the Toshiba driver and must download and update to the latest graphics card driver.

  Regarding the battery working time;
  It depends on the use of the laptop and power management settings.
  Please check Toshiba HowTo how to change the power management options:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  Welcome them

• Screen goes black whenever I move my Equium A200

  Hello

  I have a Toshiba Satellite A200, my screen goes black whenever I move the laptop, I do the screen before the screen lights up again! No idea why this happens?

  Thank you very much.

  Charlene.

  It is not easy to say with certainty why this happens, but I guess that there must be a contact between display and motherboard problem.

• Satellite A210 - screen goes black without any reason!

  I got my satellite A210-171 for a few years and a few months ago, everything was OK.
  But our when I'm working or watching a web my screen goes black and nothing seems to work?
  The only way around this is to turn off the power switch on the laptop then restart it again.

  I then get a message saying roughly...
  Computer has not closed properly OR sound closed to protect all data, then a countdown begins to re open!

  It may be OK for a few hours or maybe a day there is no limit of time on it!
  If anyone can help I would be very grateful, but please don't use of computer jargon that I don't understand

  Thank you

  Hello

  It is really hard to tell what is causing this problem. It could be a hardware malfunction or a software problem.
  But as Auma says you should test the RAM with Memtest86. It's really very easy to use and can detect modules memory defective RAM check it!

  Another question is have you installed a different display driver or updated? I ask this question because the display drivers they are not causing Toshiba sometimes of questions.
  In any case, I would recommend updated display driver and check the site Web of Toshiba for a update.

  And before moving on to an authorized service provider reinstall you Windows using the Toshiba recovery disc. So you will get back factory settings and with these settings, your laptop should work fine.

  Good bye

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Re: Satellite L350 - screen goes black when I try to play

  I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.

  My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.

  Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...

  Any help would be appreciated

  Hello

  Which disc you used to reinstall Windows?

  Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.

  In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

• Satellite 3000 - X 4: screen goes black after start

  Hello

  I have a laptop of s3000 - x 4 satellite.

  swiched top upward start then the screen goes black, I can just do the display to see loading, windows
  This happens even if I can get it to boot in safe mode, or when I enter setup.
  If I'm lucky, I have a minute of commissioning until the display changes. and as soon as I restart, I'm square.

  can anyone help? If it is a component, it is easy to find and replace?
  see you soon

  Colin

  Hello

  Have you tried to connect the external display?
  If this is not the case, try it. Also check out the switching between display devices with the FN + F5 key combination
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD supplied. Also try to improve the shape of the Tosh site graphics driver.

  But if it won't work and you can't see anything on the screen so I guess there must be something wrong with the hardware. In this case only the ASP in your country is able to help you.

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

  Hi all

  My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

  No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

  I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

  Please, share your ideas.

  Thank you

  Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

  However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.