Satellite A210 - cannot burn CD - R using iTunes - error 2131

Similar Questions

• We will not burn SN-S082H CD player using iTunes - error 2131

  Hello

  I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

  Could someone let me know the solution to this?

  Thank you, Rob.

  I think that this error due to consistent problems.
  I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

• I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  Hello raulganau, welcome.

  I suggest to try the system restore to restore the system to a date before the problem started. Try this...
  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."
  6 follow the instructions on the screen to restore the system to a date before the problem started
  Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
  For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
  http://support.Microsoft.com/kb/306084
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210 - 11K: Vista blocks the use of IE and internet

  Hello

  I'll keep this short. I have the Satellite A210 - 11K with Vista Home Premium. Basically, when I installed SP1 and the other all other updates, use Internet Explorer and all other related programs has been blocked EXCEPT MSN Messenger, which proves that I could connect to the internet. To run the system restore, I could use internet proving that updates are the cause of the problem.

  However, I can no longer perform the system restore, and I'm stuck with SP1 and no internet.

  I tried everything Microsoft Tech Support phone for 40mins, uninstallation of different updates, play with the internet settings, change the settings in msconfig etc...

  A friend of mine who is very good with the PC found that port 80 is blocked (apparently this port is very important) and my laptop is by allowing a DNS (or something...)

  I need help so if anyone can help, thanks in advance 1 million

  Felix

  Have you tried to find the solution to your internet provider?

  They should have some experience with these issues.
  To be honest I don't see the connection between the laptop to the manufacturer and your problem and I think you should contact your internet service provider. It must be a problem with the settings.

• Satellite A210: WLan and IE disconnects using phone

  Hello

  I have a problem that is driving me crazy!

  My Satellite A210 connects wireless very well, but every time I use the phone wireless Internet Explore stops.
  It is said that the Wifi was disconnected, but in fact, the connection is good.

  I tried to change channelson the router, I've been through everything with my ISP, but no luck.

  Any suggestion would be appreciated.

  Thank you
  Andrew111

  Hello

  This happen using the connection to the local network too?

  What you could do is to update the driver WLan and check if you are using the latest version of the BIOS.
  Two updates could improve your question.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• Satellite A210 - cannot install common module and driver display

  Just down to XP, downloaded drivers from toshiba and the installation was completed with an error not saying no driver found for my hardware. That's happened with the common Module and ATI Display Driver.

  I mean, I need em both!

  Help!

  Hello

  I checked the page European driver of Toshiba and it seems that XP drivers have not been to this A210 series!

  I think that you just tired to install common Modules is not supported on this laptop.
  That is one reason why you can not install it.

  With regard to the display driver.
  Try to install the drivers for the laptop models:
  PSAEJE satellite A210
  Equium A300D PSAK2E
  Equium L350D PSLE2E
  Satellite P200 PSPBLE
  Satellite L350D PSLE0E
  Satrellite L300D PSLC0E

  In my opinion, one of the pilots freed from these series should run.

• "Windows Media Player cannot burn the files to CD" error while burning a CD

  My Windows Media Player says "Windows Media Player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs.  I have burned several CD from Windows Media Player in the last year.  I used different brands of CD, since I first saw this message, but it continues to give the same message.  Whenever the burner starts to burn, I get this message.  What is the problem?

  Thank you for answering my question.   I understood the question.  In the burning options, there is a tab file types.  For some reason the appropriate boxes are not selected.  The burning process has led me to believe that I had a problem of burner or CD, while he was in fact the options.  Thank you once again.

• Can't burn CD in Itunes (error 2131)

  De : Pope

  Message: I recently bought one new Toshiba Windows Vista laptop, other than my current number, I love it!  I have downloaded Itunes this morning, imported my ipod music... all right.  However, when I went to burn it to a CD, I received this error message, "try to burn the disk fails, an unknown error occurred (2131), then my CD jumped."  I burned the CD in the past on other computers, using Itunes!  I've been messing around all morning, trying to find a solution and I am at my wits end.  It's probably something stupid that I am too looking, at least I hope.  Can someone help me please?

  Thank you, Pope

  De : Clevo

  It seems that you must update the firmware of your burner according to this piece of information...

  This may not affect you, but it seems a common problem according to google search

  "An unknown error has occurred (2131) - Google search"

  (http://www.google.com.au/search?hl=en&q=Unknown+error+occurred+%282131%29&btnG=GoogleSearch&meta)

  Another response of the community of Windows Vista discussion groups

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Re: Satellite A210 - cannot start and how can I backup my data?

  Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

  No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

  This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

  I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

  Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

  Any help is very appreciated!

  Thank you.

  If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
  I think the only way is to reinstall Vista.

  The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
  In addition, you always get a reminder message that you must burn this image to a DVD:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  However, now it is too late to burn the recovery disc.
  In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
  Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

  If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
  To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

  I hope I could help you.

• Satellite L300D cannot burn DVDs

  I have Satellite L300D and Ii took about a year, but I have never tried to burn DVD s. Now I can burn and read CDs perfectly and s DVD playback, but when it comes to s DVD burning it have problems as supplied with the laptop Toshibas program does not work for burn DVD s and other various programs such as Nero and imgburn do not work. I always get write error and other things. Told me it was the discs, so I went and spent money for verbatim DVD's instead of cheap ones and there are still some coasters of each disc, I am trying to burn my DVD burner is

  HL-DT-ST DVDRAM GSA - T50N ata device

  Can someone help me please have tried everything restoring my settings to factory when I bought the laptop as nine and still no joy desperately need help.
  The answers lol?

  Have you tried to create recovery DVDs using the preinstalled Toshiba recovery disc creator?
  Please test with Verbatim DVD - R blank.

• Re: Satellite A200 - cannot burn DVDs

  I had a Toshiba Satellite A200 for several years and have never had a DVD burning problem before.

  About a week ago when I tried to burn a DVD with Nero, he went through the motions and was told everything had been done successfully, but when I went to read the DVD, the computer told me that it was a blank disc.
  I tried to use different programs to burn on DVD, with the same result every time. My DVD drive is a TSST corp CDDVDW TS - L632H ATA Device. He can still play the DVD already made and play, then I start to think that the party "burnery" (I'm fine with the techno jargon) has made his dash.

  Does this mean I need to replace the drive?
  All the answers you guys could give would be greatly appreciated, it has become a bit frustrating.
  See you soon

  First try to remove upper and lower filters: http://support.microsoft.com/default.aspx?id=314060

  Second, make sure that there is no dust on the lens, use a Microfiber cloth to gently wipe the optical lens.

  Third, look for a firmware updated the L632H drivers Toshiba Web site.

• Cannot burn the disc in iTunes.

  I get a massage the registry settings do not support the drivers used by iTunes to burn
  CD I haven't changed the settings registgry but how do I fix this problem?

  Hello

  1. don't you make changes to your computer before this problem started?
  2 can burn you CDs in Windows Media Player or Windows Explorer?

  Normally, you will receive this error if the registry is modified or corrupted on your computer.

  However, you can access the link below and follow the steps described in the article and check if this can help you to solve the problem of burning in iTunes.
  http://support.Apple.com/kb/HT2615

  If the problem persists with iTunes, you can access the link below and to contact Apple about the issue or post your question in the forum of Apple ITunes.
  http://www.Apple.com/support/contact/

  http://discussions.Apple.com/category.jspa?categoryID=150

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• iPhone 5 s, cannot sync, can not use iTunes app

  Hi all. I'm really tired. I found the wires on both of my two really big problems, but none of the solutions listed seem to work. First of all, I will explain what is happening and then possible factors that may have led to this State. I use an iPhone with iOS 9.3.5 5s.

  1st edition.

  iTunes will not sync with my phone: when I try to do, I get an error that says: "the iPhone doesn't have to synchronize because the synchronization session could start."

  To resolve this problem, I tried, no appreciable results:

  • Reset the phone
  • Restart iTunes
  • restarting my computer
  • Restore my phone from a previous backup, then the synchronization attempt
  • restore the phone to factory, then a backup settings, and then try to synchronize
  • Praying

  2nd edition.

  Maybe the cause of the first problem, or somehow related, is that the iTunes on the phone app is now unusable. This is especially weird because after all these restorations of all other applications work fine! Mail, various games, Safari, line; they work perfectly (well, as they always have).

  But after each restore, when I try to open the music application, it would break. After restarting the phone, the application opens, but when I try to play a song, or even press any button (such as the passage of the "library" to "playlists" on the bottom panel, the app closed immediately.

  According to some discussions on this issue, I tried (again, no no is done):

  • turn on and off Alternatively 'show music Apple' (under settings > music)
  • By clicking 'Join Apple Music' in the same section to access the app from here (in spite of not having music Apple nor any interest in.)
  • force close the app
  • restart the phone
  • all of the above restorations etc.

  But I can not try one of the other suggestions, because they are all trying to sync the phone. For example, it was suggested to delete all the music that the phone is turned off and then put it back on, but I can't do it because I can't synchronize in the first place.

  Cause probable/factor

  All that being said, a likely cause of all this was that recently I have upgraded to iOS 10. I hated immensely and looked for a way back to iOS 9. I followed this guide, using the first method: http://www.pcadvisor.co.uk/how-to/mobile-phone/how-downgrade-ios-10-ios-9-reinst all-ios-uninstall-3618122 /and it seems to work perfectly, until I checked iTunes and encountered the problem above.

  Now, iTunes has been download iOS 10 in perpetuity for awhile and the "Restore" button is no longer available even on my iTunes (on the computer) screen, so even if I wanted to give up and just go to iOS 10, I can't. I also really, really want to do.

  Please, is it possible to get my phone to the operation just as it used to? Music is one of the most important functions for me. Any ideas beyond what I tried would be greatly appreciated. I just want this thing to work...

  I'm having EXACTLY the same problem, only with an iPhone 6.  All started with iOS 10.  He hated, tried to return to backup iTunes had stopped communicating with my phone, and it had to be updated to 12.5.1, which was beyond the capacity of my OS (10.7.5).  Long story short, I installed 10.9.5 now and updated iTunes to try to fix my phone, but it gives me the above message "synchronization session was able to start.

  Certainly, to pass any message from iTunes is a slight improvement over what WAS the case, but this is ridiculous.  A patch needs to be done and QUICKLY or we would start better see some kind of compensation.  $1600 and $3700 iMac iPhone and neither are what they should be, what they were doing, there is a single day.