Satellite A210 - heating and BIOS update problem

Similar Questions

• Satellite C660 - 13r PSC0LE - BIOS update problem

  I bought the Satellite c660-13r 11.05.2011

  After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

  NOW I HAVE A BIG PROBLEM.
  1 POST takes 30 sec,
  2 start windows is slow
  3. laptop is so slow I can cry!
  4. when I open the new window or klick simply open the new link, stay for 3-4 sec

  and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
  I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

  How can I flasch BIOS with other versions,
  His big problem to work

  Thank you and I hope you can help me...

  Hello

  The version of the BIOS should be mentioned in the BIOS settings.
  Turn on the device, press F2 and verify the version here.

  Also I recommend the settings of the BIOS back to default settings.
  In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
  Restart the machine and check how many processes are running in the context of the BONE.

  I recommend disabling of certain non-essential processes in msconfig.
  There, you can go to the Startup tab and could uncheck the unnecessary process.

• Satellite C855 - 19 X - BIOS update problem

  Hi all

  I have a Satellite phone C855 - 19 X and the alert tempo TOSHIBA utility prompts me to update my BIOS. However when I am doing so I get the following message

  "Error".
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1"

  Does anyone have any experience with this kind of problem? Should I add this parameter, or is otherwise around it? Because the BIOS will be affected I hesitate to do so.

  Thank you in advance.

  Hello

  First of all, you should know that the update of the BIOS is a sensitive technique and using wrongly you can damage the motherboard. So be sure to always update the BIOS.

  Second, the update of the BIOS is not quite necessary in case your laptop runs correctly.
  You have problems using the laptop? Isn't it? Well, in this case I wouldn't touch the BIOS.

  However, the error message is telling as secure boot
  Secure boot is an available option in the BIOS settings. You should probably disable secure boot before running the BIOS update file.

• Satellite U500 - 1-8 - BIOS update problem

  Hello

  I have a problem with * BIOS * update on my Toshiba * U500 - 1 d 8-PSU9ME *.
  Currently, the BIOS is + v1.50 +, but on this page http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU
  I found the new version + v1.90 +. (I know that the BIOS update should be made not when any problem occurs, but I occasionally some problems on startup etc...)

  When I run the update * UBIOS.bat* that nothing happens, but the thread * WinFlash.exe* is running on background.

  What can I do? I found this manual http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm, but it is not useful.
  Any idea?

  Thank you
  Concerning

  Hello

  If you have downloaded the BIOS v1.90 so you need to unzip (uncompress) first of all, this package. Inside the packaging, you will find the BIOS190.exe
  You must run this exe file.

  You say that WinFlash.exe is running on the background. Well, try closing this process and start then start the update
  You can also reboot the device and might try to start the procedure once more

• CPU and BIOS update problem

  I have a M57P 6395 33 M system and some time ago I added an E8500 CPU, I thought it would work even if Lenovo not listed the E8200, E8400. I was a little disappointed and I still wonder WHY lenovo gets SO specific with CPU connection. I don't see why she accepts only 2 CPUs and no other?

  Well, I bit the bullet and found an E8400 to put in the machine. I added CPU, removed the MB battery and left out for a while then went back on the new shoe, set all the necessary info. The first part of the BIOS screen mentions that there lies an E8400 (as he did for the E8500) but when it goes through the boot process it is said AGAIN that the CPU code is not enough to recognize the E8400. I am now confused.

  When I updated the BIOS, I used the that I've been led to believe was the GOOD .54KT23AUS (through the windows), but I still get the error 0167. It would be better for me to put the back E8200, re run the BIOS update using a CD?

  and there is another update of BIOS listed for the M57P 2RKT64A, I wonder if it would be better? It is not for use on 6395 but, the FIRST thing listed for THIS update is an update of firmware of CPU.

  I know that this means not much to all the world and I hear people say 'why bother? ' but I would use the machine as I'm n ot offer a more recent machine as I am a pensioner.

  A little help please.

  Thanks a lot for the quick response. I tried Flash via the CD with the E8400 in and it would not allow me to do when he came up with the error of CPU to half way through. I have since updated the E8200 back and did the BIOS update through the CD. The machine seems to have taken the update of the better BIOS this time but, the E8400 still does not work

  As for the E8400 CPU, I have an Intel CPU program on the computer and deepening classified by it for the E8400 says it's A07? However, I can't find any info on it. I guess I either will set up with hitting the F2 key when I start with the E8400 inside or just keep the E8200.

  I finnd the info on these rather confusing processors. The Intel CPU app I have gives me different information from a site like CPU world. The TDP of the processors are 65W but the ONLY thing I see different is the deepening of the base. The E8200 is listed as C0, while the E8400/8500 are E0. Why who would have much effect on the use of the more major? You would have thought that Lenovo engineers could make the system accepts the E0 revision or what is Lenovo wants to sell a new machine?

  Like I said, it's a shame that Lenovo is so affected by these machines with tunnel vision. Well

• Satellite U400 - 12 p BIOS update problem

  Card mother name: Toshiba Satellite U400
  Part number: PSU40E-02300EG3
  BIOS type: Phoenix
  BIOS version: V3.00
  System BIOS date: 12/07/08
  Video BIOS date: 03/30/07

  Aida64 quick report
  http://www.fileserve.com/file/rQkvtxY/report.txt

  I tried to do the 4.70 update in Windows 7 64 bit, but WinPhlash64.exe is freeze my laptop and I don't have (I close all program and run is administrator but I do not have) I kill the antivirus task and close all programs set Compatibility Mode for WinPhlash64.exe for Windows XP (Service Pack 3) and run is administrator but I failed.

  I tried the UPDATE of WinPhlash BACK 32-bit or 64-bit, but I failed, "start this aplication canoe in dos mode".

  On your site I can't find my v3.00 Bios version and the 4.70 can update...
  * What I'd do people? *

  Thank you

  Post edited by: macak12

  Hello

  I've got the same laptop model and updated the BIOS to version 4.70 - Win and everything last week went well.

  I also have Win 7 OS but 32 bits.

  Just a question: have you you uncompress the package correctly before you run the exe file?
  You should do this in a folder created. Moreover in the majority of cases the VAP (value added package) must be installed on your machine.

  Check it!

• Satellite L350-153 and BIOS update 1.90

  I installed Win XP Prof SP3 on my machine. Looking for new drivers I found BIOS WIN-1, 90.
  Try to update the message as the BIOS readings not to laptop. German hotline said that it will be good. Ask a BIOS to install it with the BACK, they say - back is not available.

  Updated WIN - 1.50 succeeded while running Vista pre-installed.
  Any tips? Thks

  Can you please check this again?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Type of product > Notebook
  Family > Satellite
  Product series > Satellite L series
  Model > Satellite L350
  Short model No. > PSLD0E - check please model number on the bottom sticker
  Driver type > update BIOS

  I see is last updated BIOS version 1.50. Am I right about that?

• Satellite A10 - 131 and BIOS update

  I want to update my bios but I can't understand how :) I downloaded the R131VOL2 Web site. When I run I get the question to insert a disk 3.5 "... but the satellite A10-131 is not a floppy drive. So I'm stuck :)

  Hi Niek,

  Unfortunately Toshiba provides only an update of the traditional BIOS for your laptop you need a USB FDD order to use the update.

  Kind regards

• Configuration at the request of update Retriever to download only the drivers and BIOS update?

  I'm looking to automate the update of extractor and our organization doesn't want or need additional software such as SHAREit or WRITEit, just the drivers and BIOS update. Is it possible to retrieve only the BIOS and the driver for the repository updates?

  Thank you

  At one point AHA a little there, discovered that I can mark the drivers/software I want installed as test or hidden mode and ThinInstaller don't provide that updates available, which works very well for us.

  Thank you

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Keyboard and BIOS update issue on Satellite L505-13V

  Hello, I have two problems with my laptop.

  First is related to the keyboard. It started a few days ago, the laptop has wound down due to low battery, when I turned on it again once, I received a bad operation of the keyboard.
  The main problem is that when I type for ex 4, it appears on-screen as r4, and so on for some other keys.
  I ' v wanted by web it may possibly be due to the BIOS. And decided to update to the current version.

  And here's the second problem:
  I downloaded the update to the bios from the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Could someone please help with questions?

  Hello

  > I got a malfunction of the keyboard.
  What message did you receive exactly? This message based on Windows or what exactly?
  Of course, it could be a malfunction of the keyboard but software as well. Way simpler to check this must connect an external keyboard.

  > I downloaded the update to the bios of the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Where did you download this patch exactly? This update specifically for Satellite L500-13V and PSLJ0E model series?

• Satellite R630-130 Bios Update problem 1.90

  Hello.
  Find it me difficult to update the BIOS 1.90 because I got the message that I had permission to run the update. Of course, I executed the request made by the administrator and try several times to restart Windows (Home prem 64 - bit). The last time when I installed 1.80 BIOS update there was not this sentence. Attach the screen with the message from the application.
  Thank you very much.
  [http://img692.imageshack.us/i/55171457.jpg/]

  In my opinion, there is a problem with Win7 version you are using. Maybe it's not enough to run as administrator, but you must be logged in as an administrator.

  Please check it out.

  By the way: why do you need new version of BIOS? Is there a problem with your laptop?

• Satellite L300 BIOS update problem: "what BIOS is not for your laptop.

  I obtained through Satellite L300 laptop and I want to update its BIOS (current v1.50), so I downloaded the bios update v1.60 - WIN and when I run the extracted PS10160M.exe file - I get a message that "this BIOS is not for your laptop.

  What I am, I am doing wrong?

  PS: that updating the BIOS was suggested automatically after registration on the Web from Toshiba site via the serial number.

  UPD: it looks like autosuggestion fail: manual search shows that bios update 1, 60-win is not suitable for the model Satellite L300 PSLBCE. :-(

  Hello

  You used the wrong BIOS!

  The European driver Toshiba page provides a BIOS for this Satellite L300 PSLBCE series and the latest BIOS right now is 1.50!

  Currently, your laptop uses the latest version of the BIOS.

• Satellite 1130 Z24 BIOS update problem.

  I have download the proper file, but saves it as tw30170w.rom. How do I run it? Windows does not recognize it.

  Brian

  Hello
  I would try it with the traditional Biosupdate.

  Download bios here-> http://eu.computers.toshiba-europe.com

  Watch "Support & downloads", click on "Download Bios" a choose your model

  How to upgrade the BIOS

  Satellite 1130

  1.) extracted the zip file containing the BIOS upgrade to a temporary folder.
  2.) insert a 1.44 MB diskette formatted in the floppy drive.
  3.) Execute the file *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated.
  4.), make sure that the laptop is plugged into the sector.
  5.) turn off the laptop.
  6.) place the floppy disk containing the BIOS upgrade in the floppy drive.
  7.) turn on the laptop with the F12 key.
  8.) the BIOS boot menu appears. Select 'Removable Device', 'USB Floppy Drive' or the diskette symbol using arrow keys. Press "enter".
  9.) the Notebook will start from the BIOS upgrade diskette.
  10.) the BIOS update will start automatically.
  11.) after a few minutes the laptop turns off automatically, remove the disk and do a restart. If it does not then remove the disk and turn off the system and return to restart the laptop.