Satellite A30-203 does not start

Similar Questions

• Satellite A30-203 does not illuminate

  My Toshiba A30-203 does not start. Initially, the laptop kept closing after only 5 to 10 minutes (which I thought may be due to overheating), but now it does not start even upward. When you press the power button, all LEDs indicating to except the hard drive and power on the LEDs.

  Please someone help me with this.

  Thank you.

  Hello

  Try to remove the battery and unplug the AC adapter. Several waiting time (> 15 min) and then reconnect the battery and connect the AC adapter.
  Try to start the laptop.

  This is one way that is known to me. If it's not working so I guess you have a lot of opportunities and contacts him ASP is you last loophole.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite P200-143 does not start

  My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

  I tried to take out the battery for the afternoon, but no effect

  Any suggestions?

  P

  It looks like a dead last.
  The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

  Good luck

• Satellite A30 - 30F does not recognize my hard drive

  Hello
  I have a laptop Satellite A30 and when I start it up I get this message:

  For Realtek RTL8139 (X) /8130/ 810 X PCI Fast Ethernet Controller v2.13 (020326)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  I think my laptop is trying to boot from LAN because that does not recognize the hard drive, but the drive is ok, I tried on another computer with problem. Sometimes, not always, and I don't know why, I can start from the CD. If I boot from the Windows XP installation disk, I can access the hard drive. I've run fixboot and fixmbr hard disk, but that does not change. The bios recognizes the hard drive. BIOS vertsion is 1.20. I tried to upgrade the BIOS, but I need to Windows, so...

  Thank you very much and sorry for my English :)

  Luis

  Hello!

  To message PXE, you can consult this document:
  http://APS2.toshiba-tro.de/KB0/TSB8A02G90000R01.htm

  I think that your HARD drive or disc HARD controller of the motherboard is faulty, but I don't know m.
  Have you checked the HARD drive with a special tool for this? The Drive Fitness Test can check the HARD drive for bad sectors or something else:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Take the test and post your result!

  Good bye

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• My Satellite 1405-s151 does not start

  Soory for my poor English
  my laptop does not start. When I press the button, the power turns on (green light) but nothing else happens. the screen, the CD-ROM drive does not work. Sometimes, the fan runs.

  Sometimes when I turn on the laptop it works but rarely

  I tried to remove the battery but nothing

  Please help me

  Is it possible to be the motherboard? I ask this because sometimes he dot.

  I would also like to know how to boot from a cdrom drive external usb?

  Thank you very much

  Hello

  This does not seem very well! Would you see the Toshiba logo red when you try to start because when you do not see the Toshiba logo there is a failure that is quite sure of the hardwaree!

  How long it works when it is started?

  Have you changed any hardware in the past?

  Tips: Your Satellite 1405-S151 is an American model.

  So if you want to install drivers or to do a BIOS update to go to the following site

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?MOID=&hideModName=true&BV_Session ID=@@@1329406085.1096615446@@@&BV_EngineID=cccea dcmjdkdldecgfkceghdgngdgnj.0

  To bye chris

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro L20 does not start

  I have a new satellite pro L20 M750
  does not start
  the thing is since the first time I tried to start it it would not start.
  I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

  Thanks in advance

  Hello

  Did you check if the AC adapter is working properly?
  Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

• Satellite A200-AH1 does not start problem

  I have this Toshiba Satellite A200 - AH1 laptop computer that will not start.

  The system has 1 GB of RAM, (2x512MB).

  When I remove 1 stick, the system starts without a problem, if I replace it, and the other, the laptop boots also upwards. I tested the two ram slots and ram spent each time.

  The problem of the laptop does not start only seems to happen when the laptop has installed two sticks. I tried even to 2 different new corresponding sticks and still nothing until I remove 1 piece of ram.

  Everyone encountered this problem before?
  Any ideas what the problem may be.

  My only other option would be to install a single piece of 1 GB of ram, but I would really like a better option.

  Thanks in advance...

  > The system has 1 GB of RAM, (2x512MB).
  You got your laptop with these memory modules?
  Are you sure that you are using compatible RAM (DDR2-667)?