Satellite A30 - more memory for graphics

Similar Questions

• Satellite 1130 - more memory for the chart

  Hello

  is it possible to change the memory of the integrated graphics chip of a satellite? right now I'm just 64 MB. When I bought it, 2 years ago they said it can be extended, but so far it is not possible to change it in the bios (phoenix)...
  Any suggestions?

  Hello ric

  Sorry, but something like that is not possible. The only thing that you can develop is RAM.

  It is very interesting to know who they are. You're probably talking about the local dealer. I also heard that they often give some useful tips, information and suggestions.

• allocate more memory for my video card

  model of my laptop is HP Pavilion dv4-1444dx entertainment notebook pc. I want to put more memory for the video card. my friend told me that I can assign more ram to my video card. I wanted to reach a certain condition for a game, but the "dedicated video memory" is only 64 MB. the allocated memory is 1.2 GB. I want to increase dedicated video memory. Help, please. Thank you.

  Hello

  Unless you see a BIOS setting allows to allocate more memory from the memory installed modules, it cannot be changed. I just checked the service manual for your laptop series. There is no setting in the BIOS, so the answer is that you can not change it.

  Your best bet is to increase the installed memory to the maximum, depending on whether your OS is 32-bit or 64-bit.

  A 32-bit operating system may use no more @3.2 than GB of RAM while a 64 bit OS can use as much as the motherboard of your laptop (by design) will accept.

  Best regards

  ERICO

• Satellite A30 RAM memory upgrade

  Hello.
  I have a question about my Toshiba Satellite A30 memory.
  I want to spend my memory (256 DDR 333 Mhz PC2700 SoDiMM installed chip). If I add to the original 256 MB 512 MB chip the two will work together and is a SoDIMM DDR 512 with a frequency of 400 Mhz compatible with the portable computer and 256 MB chip?
  Thank you

  Hello

  > If I add a 512 MB chip will initially 256 MB, the two work together?

  Yes, the two modules will work together. In this case, you will have 768 MB main memory.

  > is a SoDIMM DDR 512 with a frequency of 400 Mhz compatible with portable computer chip and 256 MB

  It depends on the front side bus (FSB). AFAIK the A30 supports a FSB of 533 Mhz. So the 512MM module should work at full speed to 400 Mhz.

  But note; If the memory 256MM module supports only 333 Mhz, then the fastest 512 MB module will run also with 333 Mhz. The 256 MB module will make the module second, faster more slow.

  Best regards

• Satellite A30 - 303 - drivers for Windows 7 that I can use?

  Hello!

  I just installed Windows 7 on my Satellite A30 303
  What drivers and updates download for it? I can't find any information on this topic... also toshiba detector program cannot identify my laptop...

  Thank you!

  Hello

  I think it might be a little difficult to get Windows 7 drivers for this good old classic... The point is that Satellite A30 isn't designed for Windows 7, then you the way simplest are using Toshiba recovery disc where all the drivers and tools are already preinstalled.

  I can only find Windows XP drivers on the Toshiba site, so in my opinion, it would be the best choice for this laptop.

• Satellite A30: Need driver for button front

  Hello
  I have a Satellite A30 laptop computer on which I have freshly installed WinXP (no recovery CD). It now extends so far as well. Now I'm looking for drivers for the front buttons.
  I could not find in the download of A30 (pilot controls!) Can someone tell me, where I can find these? Thanks in advance!

  PS: Sorry for my bad English! :)

  Hello

  This is not true. You can install the driver from Toshiba on the Windows XP BUT you must install the drivers of Toshiba and utility in the right order!
  It is not very easy.
  As far as I know to install the chipset driver first. The Easy button driver is responsible for shortcut keys.

  Installation of standby power in use? For me, this tool has nothing to do with the keys, but I found the info you need to the system management Bus driver. With related management system and power System Management Bus (SMBus) chips can communicate with the rest of the system.

  However, I found a lot of QFE on the page of the driver to be installed also. As you can see the manual installation is very easy and that's why he s is recommended to use the Toshiba Recovery CD.

• More memory for a Sempron.processor. Upgrades.

  I want to upgrade to Windows 7, so I only have 1 GB of Ram.  is it necessary to have more memory? My pC is "slow"? 1 GB of RAM is not much.

  http://Windows.Microsoft.com/systemrequirements

  Above is the "minimum".
  Get more RAM than the recommended minimum.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to devote more memory to graphics?

  Hi, I just spent the last hour looking for a way to allocate more RAM for my GPU.

  In my context it shows that only 320Mo is dedicated to my video memory. But my card can handle 512 MB.

  Is it possible to change this?

  I tried to get into the BIOS, but there is no "Advanced" setting

  I also tried updating my Bios, but whenever I do, it says "Bios could not be updated" or something to that effect.

  Even when we look up my computer model all the that I get is "Hp Pavilion Dv6 Notebook" without the model number. I can not even look to see if there are any BIOS updates.

  Hello

  Yes, that's right, the amount of memory dedicated is determined by the physical capacity of the chips on the adapter.

  Kind regards

  DP - K

• Add more memory for hp nc4200 - stupid question

  I know it's probably a stupid question, but I'm trying to insert more memory into my old laptop for my son. The vehicle currently has 1 GB of memory that I see when I take off the lid, but there apparently also 512 MB that I can't see. I thought of taking the 512 MB and replace it with a stick of 1 GB giving my son of 2GB, but I'm sitting here, after removing the cover and although I can see where is the 1 GB, I see no sign of the 512. Are the memory sticks in two places, not one, and if it's a how to insert the 1 GB when there is not enough space?

  Hello

  bbsmallkid wrote:

  I know it's probably a stupid question, but I'm trying to insert more memory into my old laptop for my son. The vehicle currently has 1 GB of memory that I see when I take off the lid, but there apparently also 512 MB that I can't see. I thought of taking the 512 MB and replace it with a stick of 1 GB giving my son of 2GB, but I'm sitting here, after removing the cover and although I can see where is the 1 GB, I see no sign of the 512. Are the memory sticks in two places, not one, and if it's a how to insert the 1 GB when there is not enough space?

  DDR II SDRAM, 400 or 533 MHz, two locations SODIMM, 256/512/1024 MB expandable to 2048 MB maximum

  Here is a link to the welcome and maintenance guide.

  It is an internal memory and an external memory module. Replace the external module is quite simple. Access to the internal memory card requires a dismantling. See page 6-28 in the manual.

  Best regards
  ERICO

• HP Envy Touchscreen M7-J120dx: more memory for HP Envy Touchscreen m7-j120dx

  I bought the laptop from Best Buy last year:

  http://support.HP.com/us-en/document/c04094897

  I'm trying to understand if the 8 GB of memory that came from the factory in the laptop is 2 separate 4GB memory modules or a single module of memory 8 GB?

  Then I think to upgrade the memory for a total of 16 GB of RAM, which is the maximum. the amount of RAM that is permitted to add to this laptop.

  I see conflicting information. online as to exactly which modules of memory, I would need for the M7-J120dx.  I'm assuming I current have (see previous question in this post) 2 modules of individual memory of 4 GB each in there, and if so, that would mean needing to buy 2 individual 8 GB memory strips each.

  All anyone can provide the specifications are greatly appreciated.

  Hello

  8GB means usually, 2 x 4 GB memory sticks.  You can remove the service panel to check.

  Edit: I was able to confirm that your device has 2 x 4 GB sticks.  You can buy sticks of 2 x 8 GB maximum memory on your computer.

  Please take a look at the Maintenance and service guide:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=6879013

• XW8400 Worksatation: install more memory for the XW8400

  What is the quantity of RAM MAXIMUM that can take the XW4800 workstation, I currently have 32GB I would like if possible at least double that to 64GM or even 128 GB, as I do massive CAD assemblies who are greedy memory

  Thank you

  Well this Did IS NOT CORRECT after I posted to this group I sent a request for assistance from HP according to page 5 of the 2009 edition of quick tasks, with the Core 5160 Intell Quad 3.00 GHz I can go up to 128 GB

  Memory NOTE: Dual Channel is only supported when the system is configured with DDR2 memory symmetric (i.e., 2 x 256)

  Configure for Notes of Support order (CTO)

  ECC DDR2 - 667 PC2 - 5300F Full Buffered DIMM CTO

  HP 512 MB (1 x 512 MB) DDR2 - 667 ECC FBD RAM

  HP 1 GB (2 x 512 MB) DDR2 - 667 ECC FBD RAM

  HP 2 GB (2 x 1 GB) DDR2 - 667 ECC FBD RAM

  HP 4 GB (4x1Go) DDR2-667 ECC FBD RAM

  HP 4 GB (2x2gb) DDR2-667 ECC FBD RAM

  HP 8 GB (4x2Go) DDR2-667 ECC FBD RAM

  HP 16 GB (4x4Go) DDR2-667 ECC FBD RAM

  HP 16 GB (8X2Go) DDR2-667 ECC FBD RAM

  HP 16 GB (8X2Go) RISER of RAM DDR2 - 667 ECC FBD supported ONLY w/double processors.

  HP 32 GB (16X2Go) DDR2 - 667 ECC RAM taken FBD supported ONLY w/double processors.

  HP 64 GB (16X4Go) DDR2 - 667 ECC RAM taken FBD supported ONLY w/double processors.

  HP 128 GB (16x8GB) DDR2 - 667 ECC RAM taken FBD supported ONLY w/double processors.

  I'm so Noah folloing place on it with another HP support Question to clarify ther information they provided

  This e-mail is in reference to the case number: [case number edited by moderator] .
  This is in continuation to our response with regards to your support request.
  Please ref the link for more information about the Memory cards supported on this unit on Page 5 and 6 .
  
  http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04136962
  
  Thank you for contacting HP.
  
  Regards,
  [Name edited by moderator] HP Technical Support Engineer
  

• Satellite A30 extremely slow for about 2 months now

  Hi I need help, my A30, I bought about 2.5 years ago was extremely slow for about 2 months now. I only use it at home, and as such, I don't have a lot of programs loaded on it.

  What could be making it so slow and what can I improve performance.

  Hello

  The first thing to do is start the Utility Manager tasks (right click on the task bar) and check what you have running, as well as the process what CPU they use. For a standard installation of Windows XP I would expect to see about process assets of 40-50 but only 1 or 2% of CPU. Stop every process that you don't want especially if they use a lot of CPU.

  Then, run a analysis suitable anit-virus and also a scan of Malware (Adaware and Spybot) and clean everything they find your system.

  Finally, run a cleaning disc, followed by a Disk Defragmenter (both in the Accessories/System Tools menu).

  Kind regards

• Satellite A30 needs ACPI for Vista

  I have laptop TOSHIBA Satellite SA30-213. I try to install Windows Vista Beta 2, but it fails and give a message that my bios needs ACPI.
  How can I update my BIOS? I tried to get an update and I failed.
  What should I do to install vista?

  I'm having the same problem, however, after doing a spot of research on the net, it seems that to the there is still no current fix for it.
  We will have to just wait for MS or Toshiba fix things, until we can test it.
  Unless I am mistaken radically, and there's an update... ?

• Is anyone DIY added more memory for Mac Mini mid 2010

  MY Mac mini mid-2010 is very slow.  I have 2 GB of memory and would like to increase it.  Can I do it myself or do I have to make to someone professional tech?

  It is very easy to replace the RAM on a Mini from 2010-2012. See the videos:

  https://eShop.MacSales.com/installvideos/mac_mini2010/

  Make sure you get only the memory of a place as above which guarantees that proper operation with your Mini. Macs ae picky on memory.

  https://eShop.MacSales.com/shop/memory/Apple_Mac_mini/DDR3

• Satellite M30x-165 - drivers for graphics card

  Hello

  I don't know if I post my thread in the correct language, but the interface of the site Web tells me it must be in English. However, I am of the Germany and I'm looking for drivers for the specifications mentioned in the title.

  I've already looked through the internet, Web sites visited and tried to download the drivers manual, for example drivers ATI Radeon Mobility 9700 from amd.com
  I hope you can help me with my problem.

  welcomes poetter

  Hello

  Take a look at these sites

  For European models

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/