Satellite A300 - 1 ms PSAG8E - dropouts audio when fan on / off

Similar Questions

• Satellite A300 - impossible to install the audio driver Conexant high definition

  I have a Toshiba Satellite A300 series with Conexant audio... my problem is the following...

  I can't install drivers for Conexant high definition audio in windows vista 64-bit because when I run the installer smartd 221...

  + Setup properly detects the type of audio chipset, but at the end of the installation, finish with the message 'Fail'... +.

  The version I have installed is 4.36.10.0...

  Thank you...

  I'm sorry for my English

  Hello

  Have you tried to remove the sound from the device manager card, first of all?
  If this is not the case, to do this.
  Remove it, and then restart the laptop.
  After restarting again, windows should recognize the sound card and eventually he would ask for the driver.
  Then you could point to the new driver downloaded files and could complete the installation.

  See you soon

• Satellite A300 - my stucks laptop on BIOS when USB is inserted

  Hello!

  I have a problem with my Toshiba Satellite A300. I had burned linux on a USB and tried to boot from usb. So when the laptop open, I inserted the USB and you press F12. The pc just stuck on Toshiba - Leading Innovation Screen.In the past, that I was doing the same thing and it worked very well.

  Now, I can't boot from usb.
  Can someone help me please?
  Thanks in advance!

  Set the BIOS to the default settings, restart the laptop and press F12 on startup laptop. When the boot menu appears put USB in laptop satellite.

  In the start menu, choose the USB option and press ENTER.

  What happens when you do this?

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• Satellite A300 - error occurred in the audio settings

  When I try to watch a DVD or movie files from an external hard drive using a TOSHIBA DVD PLAYER, it finds the file or good movie starts to play and then an error message pops up saying to what follows - * an error has occurred in the Audio output settings. Please check audio driver is implemented properly.*

  I want to know how to access the audio driver to check the settings. Any help would be appreicated.

  See you soon

  Dale

  Hi Dale_S,

  It depends on the sound card you have, but normally you can access the settings through Control Panel > Realtek sound effect Manager.

  As the error already say you could also try reinstalling the driver. It only takes a few minutes.
  In addition, it would be interesting to know if this happens with other players, like VLC media player.

• Satellite A300-1EG: need help to write module fan control ACPI NHC

  Hello

  I need assistance with writing module NHC allowing me to adjust the speed of the fan always at max level.
  The reason why a desire to do this is high time on the CPU and the GPU.

  I find guide to do something like that, but it of for laptops asus and records of fans and time does not match.

  http://help.notebookhardwarecontrol.NET/ACPI/HOWTO/nhcAsusM2N/index.htm

  My laptop is Toshiba A300-1EG

  Thanks for the help and sorry for my bad English

  I think you're going in the wrong direction. As you probably all know it works automatically and Toshiba made laptop computers to function at an optimal level. If you have problems with this older model A300 you should take standard steps and clean it. It can be done on a career path.
  Laptop can be disassembled, cleaned. CPU fat can also be renewed.

  After doing all this laptop will be clean, laptop can catch its breath and all hardware components can be properly cooled. There is therefore no need to change anything, especially values not original in the BIOS or anything related to the GPU.

  I have the same machine. It works still fairly quiet, but one day, I want to do the same thing.

• Satellite A300-177: using XP - no sound a modem and

  Hello

  I have laptop that Toshiba Satellite A300-177 preinstalled with Vista. When I installed xp on it I'm unable to install the modem and audio.
  Conexant high definition SmartAudio 221
  HDAudio Soft Data FAX Modem With Smart CP

  I downloaded driver for audion with the name following (ConexantHDAudio 221_XP.zip), but when I install this driver there is an error message that no audio device is set by your system.

  Please help me to install audio

  The right question is known, for me, the installation of patches from Microsoft:
  * KB888111 and KB835221 * is the key!

  First install the two patches.

  Then restart the laptop and access the Device Manager. There you should find one or two markets PCI device with the yellow exclamation point.
  You must remove these devices and should restart the machine.

  Then the operating system should recognize a new device and should ask the driver.
  Then, you install the Realtek audio driver.

  Regarding the modem driver. Well, just check the modem drivers for another maybe series laptop, it works also.

  Good bye

• Satellite A300-1NO - Power Saver crashes

  Hello

  I get a fatal error when starting electric saver application, code 0 x 2

  I have a Satellite A300 1NO with Windows XP. When the energy saver tries to start it gives this error code and accidents. This happens with the installer to start too.

  Assuming that the cause is the lack of files required by power saver. What can we then these files?
  ProgFiles/Toshiba and its subfolders are intact. I deleted some files from windows dir, who seemed unused, and needles. for example. directories and temporary files. And I think, that it is possible that some useful files have been deleted accidentally.

  So, it is possible that the cause is missing some files in windows? Otherwise, I have no idea of what was happening here exactly...

  Post edited by: Emoryy

  Hello

  I ve page no idea why your Power Saver crashes but before install you any what Toshiba you tools should updated Win XP to the current state, and then you need to install the common Modules of the European of Toshiba.

  Common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  So uninstall the old Power Saver, clean the registry and operating system with a free tool (i.e. CCleaner), install common Modules, and Power Saver.

  Good bye

• Question on AC adapter & plug on Satellite A300

  Hi all

  I bought a new Toshiba Satellite A300-1ec almost 20 days, yesterday, when I plugged the cord to charge my cell phone, I find that it works well. When I went to the supplier he said that n adapter cord with plug is burnt, can this happen with a new, now what should I do... to get it replaced, or where can I find a replacement for her

  Kind regards

  Mathew

  Hello Martin

  Please contact the nearest service provider authorized as soon as possible. Explain the situation and they will help you. Please check http://eu.computers.toshiba-europe.com > support & downloads > find an ASP and you will find the addresses and phone numbers.

• Satellite A300-1MS - I want a new BIOS with fan control

  Satellite A300 - 1 ms PSAG8E

  New BIOS with fan control, please.
  Thank you.

  Why Toshiba should make a new BIOS just for you?
  You have a problem with the fan?

  I put t know what OS you use, but you can change the method of cooling with Toshiba Power Saver. On both my Toshiba notebook, I use this tool and I like it.
  You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite A300 Vista - no sound

  Hello

  The sound then has full on my Satellite A300 on Control Panel etc. Playback, no sound, off headset nothing anyway.
  I went on the sound, hardware and Control Panel. On the first section, somehow I wiped the image of Realtek and the image of the speaker.

  I downloaded the Realtek, but cannot reload, or the logo of the speaker?
  What should I do to get that back?

  What caused the problem in the first place?
  Could he have put a SKYPE phone on it?

  Hello

  I must say that your post is really confusing.
  I put t know how someone could erase the image of Realtek and the image of the speaker.

  But I'll try to help you.
  I think you need to access the Device Manager first and should remove your sound card in the list of devices.
  Reboot the laptop and after new restart try reinstalling the audio driver that you downloaded from the European driver Toshiba page.

  Usually, this should contribute to renew the sound card driver and retrieve the sound!

  Welcome them

• Satellite A300 - built into the camera hangs

  Salvation;

  I have a problem on my laptop, built-in camera. After opening, using Yahoo messenger (webcam) or by Assistant camera camera software, in a few seconds, it crashes.
  I tried to check if the pilot does not work, he said that there was last updated. I also try to uninstall and re - install, same problem
  Which is wrong with this device? I just bought this laptop last month and gives me a problem. Can someone help me out here?

  Model: Satellite A300
  Part number: PSAG8E-05J00TEN
  Serial No.: 29452151Q

  Thank you!

  Hello

  I have Satellite A300 too and use cam with Skype. It works perfectly. I tested it with ICQ
  Have you tested the feature cam with another application?

  Also try disabling software pre-installed to Webcam Assistant (usually started automatically with Vista) and check the functionality with Yahoo.

• Satellite A300 - Toshiba 1 3 - button controls do not work

  Hello. I have a problem of analog.

  Satellite A300 - 1 3 purchased, installation Winxp and sensitive buttons off value left for work. Today, I'll try the Bios version to check, but doubt that it influences it. Nothing is really present official Toshiba?

  I'm sorry for my English

  Hello

  This is a user to user forum and I doubt that you will receive something official of Toshiba. What you get are a few suggestions a user cell phone like me and you.
  A300 - 1 3 belongs to the series of PSAG0E (I hope).

  See European driver of Toshiba. Choose this model of laptop and reinstall the common Module

  In addition to install the Toshiba * controls * that you might find in * PSAG8E * series!

• Satellite A300 - starts, but I don't know why

  I recently bought a Toshiba Satellite A300 and the following events occur:

  I turn off the phone properly, I close the lid, and sometimes with the valve closed the laptop starts normally, both the battery and without. I went through all the power options, and I put that closing the lid do nothing if this was the case. For some reason, Notepad starts do not know why. Perhaps, it is important to update the BIOS?

  I had one of you '? I had many laptops and never exceeded. I hope you tell me clues.
  Greetings and thank you very much.

  Hello

  Then you have already solved the problem?

  If this isn't the case, you should try to disable the wake on LAN functionality that you can find in the BIOS. In my case it worked.

• Satellite A300-PSAG8E - drive HARD light flashes even when I do nothing

  These are my problems

  1. my HARD drive indicator flashes even when I do nothing (flashes every half second or more)

  2. when I go somewhere my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.

  BIOS upgrade to the version 2.20

  OS: Windows 7 Ultimate
  Laptop: Toshiba Satellite A300-PSAG8E

  Someone knows the solution?

  Need help please! Thank you

  > 1. My drive HARD light flashes even when I do nothing (flashes every half second or more)
  Even if you n touch cell phone t, the disk is running and different applications, access data. Applications and processes that are running in the background cause this blinking. Notes; This isn't a problem!

  > 2. When I go somewhere, my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.
  Disable the support by modem and disable the settings turn off the screen while the laptop is not in use. This is possible in the Windows 7 power management.