Satellite A300-15 b don't wake!

Similar Questions

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite A200 - 1 MB don't wake up on hibernation

  Help, please.

  I was using my laptop for over a month and I can't use the hibernation mode... I can't turn on my laptop when it goes into hibernation mode. The power light is blue. Is there a keyboard sequence that I have to type?

  I use Windows Vista Home Edition.
  Thank you.

  Hello Ina

  How, you switch to hibernation mode:
  -close the lid of the laptop
  -using the FN + F4 key combination or
  -using the button on the start menu?

• Satellite A300 PSAG0A: Vista to XP downgrade question

  I just bought a Satellite A300 with the following details:

  Model satellite A300/Y00 (exclusive to Dikc Smith Electronics in Australia)
  PSAG0A-02Y009
  2.1 Ghz Intel Core 2 Duo T8100
  2 GB RAM DDR2 (667 MHz)
  250 GB SATA HARD drive
  Graphics Intel X 3100 (GM965)
  MS Windows Vista Business pre installed
  MS WIndows XP downgrade for A300 recovery disk media

  Basically, I just turned on and configure everything, nothing about that fact yet, not even other software installed.
  I immediately made 2 copies of the recovery of the product for Vista media. So the disc XP and Vista should have all the drivers on them.

  I want to install a software particularly (for programming electronic components), but the company said that it is not fully compatible with Vista. Therefore, I would like to downgrade to XP and use it for 6 to 12 months, and later POSSIBLY roll back to Vista.

  Now, the information provided by Toshiba are limited with respect to the downgrading to XP. (And there is absolutely nothing about to go back to Vista).
  The documentation provided shows four options at retirement:
  1) recover to out-of-box-state,.
  (2) covers the single State of Windows,
  (3) recover without changing hard disk partitions,
  4) recover on a custom size partition. He then goes on to say "Please do not select 'Recover without changing the partitions of hard drive' as a method of recovery." Windows XP cannot be used by the composition of the partition of Windows Vista".

  First of all, what are the ramifications of the other options? What is the best/worst one and why?

  If I understand correctly, the partitioning of the hard drive must be changed for the downgrade to XP.
  But in Vista, there is a separate partition to store data recovery, so that the partition will be changed (lost).
  If ever I decide to go back to Vista, the Vista recovery media I created also change the partitioning to the way it was originally?

  I dared not touch anything until I'm 100% sure of what needs to be done.
  If anyone has any experience with this or advice, I would be grateful for your expertise.
  Feel free to be as detailed and technical that you like - I want to 'understand' and not just 'do '.

  Thanks in advance,
  Robert.

  Hi Robert

  I put t have Satellite A300 and I don t have an Australian notebook but I m, owner of another European model Satellite with preinstalled Vista operating system!
  In any case, I want to share my experience with Vista and XP and of course the recovery procedure on E

  First I noticed that the new notebook series is not delivered with the Toshiba Recovery CD but the image recovery is store on the HARD drive and you can create and burn image from own DVD.
  Seems that you already have.

  As you already suggested the Vista supports 2 different partitions. A partition is the system partition and the partition of the other, smaller, hidden was created for Vista backup files. So if something goes wrong with your Vista operating system, you can use the repair function on Vista to repair the operating system. In this case, small backup partitions, hidden in necessary.

  I also like Xp and that's why I installed it on my laptop. I didn't format t disc installed HARD but the XP on a new created partition.
  You can create a partition in Vista's disk management.
  In any case, I now have a dual boot OS and I use Vista and XP.

  With regard to the use of the Vista DVD recovery;
  If you want to go back to Vista, you will need to boot from the Toshiba Recovery CD and the Vista installation process should begin.
  But be aware that the Vista recovery CD would format the whole HARD drive.
  It would erase the partitions and remove stored data.
  Therefore, you must back up your data before that you would use the recovery CD!

  Hope this little info will help you.

  Good bye

• NVIDIA graphics confg on Satellite A300 - 1-5

  Hello

  I use a laptop Toshiba Satellite A300 - 1 5 and I want to install games, I want to know wheather this system got confg graphics from NVIDIA.
  or let me know how to install the same?

  As far as I know the Satellite A300 - 1 5 don t have a Nvidia graphics card. This laptop has an ATI Mobility Radeon HD 3470.
  So you n t need Nvidia drivers or things.

  If you want to learn more about the different graphics settings in the ATI driver, here's an article on:
  http://en.Wikipedia.org/wiki/ATI_Catalyst_Drivers

• Satellite A300 - starts, but I don't know why

  I recently bought a Toshiba Satellite A300 and the following events occur:

  I turn off the phone properly, I close the lid, and sometimes with the valve closed the laptop starts normally, both the battery and without. I went through all the power options, and I put that closing the lid do nothing if this was the case. For some reason, Notepad starts do not know why. Perhaps, it is important to update the BIOS?

  I had one of you '? I had many laptops and never exceeded. I hope you tell me clues.
  Greetings and thank you very much.

  Hello

  Then you have already solved the problem?

  If this isn't the case, you should try to disable the wake on LAN functionality that you can find in the BIOS. In my case it worked.

• Satellite A300: Option to "Wake on Wireless LAN" disabled in the BIOS

  Hello

  I have a laptop Satellite A300-230 and in the BIOS, the option (under Advanced) to toggle the * Wake on Wireless LAN * is disabled and grayed out with no way to change it.

  Why is it so? How can I activate it?

  BIOS version is 2.20 (later).

  Thank you all.

  Hello

  I have no idea why its grey in my case, I can enable and disable this option
  But I can do that too in utility Toshiba HWSetup located in all programs-> Toshiba Europe GmbH

  You can activate this using this tool?

• Satellite A300-1NO - wakes up to the top of the standby mode

  Hi all!
  I have a Satellite A300 1NO with Win XP pro.
  The problem is that the laptop wakes up from sleep mode automatically after about 5 minutes.

  I tried unplugging all the cables (LAN, usb, etc.) but the power plug, but it's the same result.
  So what can cause this? What should I try?

  Thank you.

  You must disable Wake up on LAN function in the BIOS and Windows.
  Check the BIOS for this option!

  You can disable this feature in Windows if you right click on the network adapter > properties > advanced > wake on LAN

  I hope it works for you.

• Satellite A300 - how to use wake up on keyboard functionality?

  Hi all

  I have a Satellite A300-1ME and also a desktop PC intel 4 and I use a KVM (Keyboard Video Mouse) to control two computers with one keyboard & mouse. The kvm has PS/2 cables and is connected to the TOSHIBA by a PS/2 to the USB cable from the switch. The connection of the keyboard & mouse to the notebook computer is connected to a USB port. I use vista 32 bit on my laptop and XP on the desktop personal computer.

  Now for my question, how can I use the keyboard to turn on the laptop closed (not the standby mode). I tried to do by choosing the keyboard HWSetup awakening and also, I checked the bios, to the keyboard 'waking up' option and he chose but still it won't start the laptop with the keyboard.

  P.S if there is no way to turn on the laptop keyoard, then perhaps by pressing the dvd - rom. If someone knows how to do made me know

  Thank you
  * Is * a * R *.

  Hey Buddy,

  Operating instructions, I found the following information:
  + Wake up on keyboard: when this feature is enabled and that the computer is in mode 'sleep', you can activate the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in "sleep". +

  Does that answer your question? ;)

• Satellite A300 - 1 GM - after Windows and BIOS updated LEDs don' t work

  Hello!

  After Vista SP2 update and update BIOS (Media Player and LED power) LED buttons do not work.
  Why?

  How can I fix these buttons?

  Hello

  Satellite A300 - 1 GM belongs to the series of PSAG4E so you chose the update of the BIOS for this series of model?
  Also in the BIOS, you can enable and disable the lighting. Check this box!

  Lighting will also be controlled due to the added value package. You need to reinstall it and the Toshiba site, you can find a newer version:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite A300-1EG multimedia keys don't work in Win XP

  Help me!

  Lighting does not work.
  Where can I configure the multimedia keyboard drivers?

  Maybe the necessary computer special drivers for WinXP?

  Hello

  If I m not mistaken the A300-1EG belongs to the series of PSAG4E.
  Is this good?

  The Toshiba page provides all the XP drivers but the controls are missing

  Toshiba controls is a tool that is needed to get the Toshiba control buttons work.

  In your case, I recommend checking and then reinstalling the controls of the other Satellite A300 series.

  Good bye

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• Music satellite A300 PSAG4A keys doesn't work do not

  Hello

  I am new to this forum and in fact Toshiba problems in general. : P

  I have a laptop Toshiba Satellite A300-PSAG4A running on Vista 32 bit. A few days ago the music keys Harman/Kardon lighting on it suddenly stopped working. When I use my cell phone, I usually put in mode 'sleep' and normally wake him using these support the keys - but for some reason, they stopped randomly light up and answer.

  I tried used - by restarting the computer laptop and test frantically buttons, but of course, they do not react. Keys and the laptop itself served very well up to now I can't think of any reason why this is happening now.

  I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

  In addition, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

  I did a system health report to check if it is a driver problem and it came with the following text:
  Error messages two affirming that "the device for the Base system device driver has not been installed" and the other saying that "the device driver for #UNKNOWN # has not been installed."

  I don't know that anyone say or if they are relevant to my problem.

  Help, please?

  > I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

  Hi, you can download the VAP (value added package) for a Toshiba driver page.

  > Also, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

  Surely, they do think you searched on a fake page the A300 PSAG4A seems to be an Australian series of Toshiba and therefore, you should check page driver Toshiba to THE.
  http://www.MyToshiba.com.au/support/download

  Here you should find the VAP

  Recommend to uninstall the first PPV, and after new reboot you could install the package again.

• Satellite A300 - Win Vista instalation disk missing

  Hello world.

  This is my first time on any forum ever :)

  In August 2008, I bought laptop Toshiba Satellite A300 - 149. There was a lot of turbulence in our relationship, but we always went by them so far.

  Some time ago I added an additional hard drive just for the system. I did it just to have all important data in the entity. This extra drive decided to die.

  The problem is that there is no more the oryginal disc recovery so I have a laptop, hard drive and the product key for windows, but no instalation windows disk or at least file.

  Can you please help me and tell what should I do now because I can't undo what I've done already :)

  Hello

  Your A300 was delivered with the operating system from Vista preinstalled (recovery image). This recovery image is saved on the HARD disk. Operating manuals s described document that each owner of the laptop must create the installation of recovery disk using pre-installed recovery media creator tool.

  If I understand you right you didn't he create if it is your only error.
  What can you do now?
  You have two options:
  1 / you can order the original recovery disc - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  I have too many A300 and for three years I use it with Windows 7 32 bit. It works perfectly and much better than original Vista.

  In any case, you do need to make the decision. If you have any other questions do not hesitate to ask.

  Good bye

• Re: Satellite A300 - second hard drive

  Hello

  Perhaps some may say where I can buy hard disk for the motherboard conector?
  I have place for HDD and connections on the motherboard, but don't not have hard drive connector.
  Camputer are 1gn A300.

  Help, please!

  Hi Lotus

  Toshiba offers Satellite A300 with one or two hard drives with two different mothers. Plastic cover is the same for both models of laptops and that's why there are two disk HARD covered and placed two HARD drive. Laptops without SATA connectors are not ready for the upgrade.

  No one here in this forum has reported that these updates possible if laptop doesn t have original SATA connector to the second HARD drive, so I think that you cannot upgrade your laptop with the second HARD drive.

  By the way: it's not easy to find these parts.