Satellite A300-1EG awakening of the mode standby

Similar Questions

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Satellite A300-1EG - cannot use the command buttons (play, stop) Win XP

  Hello.

  I have a problem with my Toshiba A300-1EG with good software Toshiba Control Center for Win XP, because I do not know how to import a brightened sense Key (PLAY, STOP, FORWARD, BACK).

  Toshiba offers a poor software on own site.
  I can change only 2 buttons (SOUND ON / OFF and ON AUDIO PLAYER).

  Help!
  PS. Sorry for my English

  Hello

  The play, pause, stop buttons and following can not be changed!
  You can use it with Windows Media Player or WinAmp (if you enable the option in Winamp).

  See you soon

• Satellite A300-215 - cannot get the mode full screen

  Hi people!

  Yesterday bought a beautiful 215 Satellite A300 - Intel Core 2 Duo / P8700 / 2.53 Ghz / 15. 4 WXGA / * Radeon HD 3650 * / 400GO
  "Works like a Ferrari, but has a problem of querky get a full screen whenever I try to play any media, for example watching footy, movies, the screen will just go *" FULL SCREEN "*: (: (, tried my best change the display resolutions in the control panel in all possible ways, but can't it upwards with a full screen full.))"

  Downloaded yet another driver nvidia video driver that corresponds with the books of Toshiba, but it does not work. The current driver I have to view it of ATI Mobility Radeon 3650, also of no assistance?

  When I try to set the resolution fpr the wmp player or player spvod to fit the entire screen, the page turns just huge, unmanageable, it's fine with laptop functions, no problem. at all, but not possible to take advantage of any media-magnified.

  Strongly, I'd appreciate it if someone could help me please solve this, thanks in advance! Soon :)

  Hi Amor,

  > Downloaded yet another driver nvidia video driver
  Are you kidding me? : D
  Why you are downloading a nVidia display driver if you have a Radeon HD 3650 graphics card?
  I put t understand this

  Anyway, you have full screen in Windows, or this only happens if you play any media?

  In addition, it would be interesting to know if you have installed XP yourself or was it is preinstalled on your laptop? You should test it with OS preinstalled Toshiba, maybe that s a software problem.

  Also make sure that this latest version of the BIOS is installed and verify in the display settings, the image format Options. It must be set to full screen.

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• Tablet Wacom nonfunctional after the awakening of the mode standby

  I have Windows 8,

  Dual core 2.8 ghz intel, 8 GB of ram.

  I use a Wacom Bamboo (ctl 471) splash tablet.

  I installed the latest windows drivers 8 Wacom.

  When my computer wakes from sleep mode, the Tablet no longer works.

  I have to restart the computer to make it work.

  That kind of defeats the whole purpose of the mode 'sleep'.

  Any ideas?

  Hi eingram,

  Thank you for choosing Windows 8 and for giving us the opportunity to help you.

  I understand that the tablet will not work after waking from sleep. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  Method 1: I would uninstall drivers and reinstall them.

  a. open the key Device Manager by pressing Windows + R and type Devmgmt.msc

  (b) display or touch drivers.

  c. Please, right click and try to uninstall the driver.

  d. restart the computer and the update.

  Run the troubleshooter of material and check.

  Method 2: Follow the steps to run the Troubleshooter:

  a. press Windows + C keys on your keyboard to show the charms.

  b. type troubleshooting, and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the search option.

  d. click convenience hardware store to run the troubleshooter.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Accident sound and graphics of P200D-11R satellite after the awakening of the mode standby

  Hello

  I was wondering if anyone here has had experiences similar to mine (below) or he can offer solutions.

  I have updated my OS P200D-11R for Vista 64 Ultimate to take advantage of the additional performance. I also add that the BIOS has already been updated to version 1.4.

  Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  The soundcard is a noise fuzzy laud very whenever he wants to play a sound and graphics to produce a lot of horizontal lines on the screen. I then just restart the machine which means losing all my unsaved work.

  Everything works fine as long as the machine is not fashion "Eve". Currently, I disabled sleep mode to prevent the machine from entering, but I find life very difficult without it.

  I am very surprised and also disappointed by the fact that Toshiba didn't test these machines with Vista 64 Ultimate and 4Gig of RAM!

  Additional info:
  Memory is the same type of Samsung as 1Gig modules supplied by Toshiba initially with the machine, and the Toshiba part number is recommended.
  I tried to install other (newer) device drivers from Realtek and ATI with no improvement.
  Memory modules all trials and are not defective. They have also been tested on my laptop Dell friends without any problems even in mode 'sleep'.
  I installed my friends 2Gig Dell memory modules in my P200D and they produce exactly the same results with sleep after accidents.

  My thoughts are that it must be another problem of BIOS unless anyone can shed some light on the question from another angle.

  Help, please! Thanks in advance.

  > Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  So if I understand this right, everything works fine using the standard RAM modules.
  In my opinion, the problem is caused by the new additional RAM.

  I have no idea why this happens, but in my opinion, it would be really interesting to know if this problem still persists with other memory modules live.
  I think this should be verified without a doubt because in this case, you might find what? s evil exactly!

• Satellite P100: screen remains black after the awakening of the mode standby

  Hello!!
  Can someone help me with this problem?
  I update my bios [V3.30] 12.22.2006 and now I have a problem.

  When I put my laptop P100 in stand by and I return my screen no longer works! I push every button on my keyboard, I move my mouse but nothing.
  Only one solution to come back is to close my laptop and reopen after that.

  What to do? Please help me if you have any ideea!
  Best regards to all!

  Hello

  I hope that you used the good BIOS.

  Have you tried to update the graphics driver? Not? Then do it!

• After the awakening of the mode standby, Thunderbird crashes if the start menu of windows 10 is open RESOLVED in version 38.3.0

  If I have Thunderbird up and then I put windows in sleep mode, when I come back once again, the start menu in Windows 10 appears automatically (can someone tell me how to stop this?). If I click anywhere on the screen menu start disappears and everything works fine, but if I forget to do it and for example, double-click on an email to open it, Thunderbird and then freezes. If I close Thunderbird and re-open he, she, then it brings up the email that I had clicked on, so he must have tried to open it while it was frozen.
  This isn't a big problem, just annoying bloom. Don't know if it's a problem of Windows 10 or Thunderbird. If someone can tell me how to stop start menu from popping up automatically, it wouldn't solve the problem, but it would be at least!

  Version 38.3.0 is now available. Resolve the problem?

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• Satellite A300-1EG - dead with the graphic card pixel problems

  Hello

  Not after two months of use of a brand new Toshiba A300, I had a dead pixel.
  Its only I guess, but what intrigues me is that it could be somehow merged with disorders, that I got with my graphics card.
  I had trobule with S-video use, there was a bad image, without collors.
  Is there a chance that I can have my screen replaced?

  Im still under warranty.

  Thank you

  Hello

  Regarding the dead pixel:
  > Is there a chance that I can have my screen replaced?
  I doubt that the screen would be replaced only due to a dead pixel.

  Please check out this article from Toshiba. I found it in the page of knowledge base of Toshiba.

  + What is the maximum number and type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels? +
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  You will find details of the maximum acceptable number of holes per 1 million pixels.

• Qosmio G30-126 - black screen after the awakening of the mode standby

  Hello

  If I just put my Qosmio G30 - 126 mode (button or just close the housing cover) sleep it start back only with black screen. HD is being run but nothing else. I have to turn it off and start again with the start-up. Of course come screen with menu to speak of a problem... Don't have pictures. The resolution is minimum, I have to change.

  I'm please that reinstallation of the system, it's not what can solve problems.
  My question who will pay the time if she will not solve the problems, they said that it will be in all cases.

  Why I bought the warranty?

  PS. Admin confirms my messages...

  Post edited by: ADMIN

  Found this thread and I would like to share my knowledge with your
  I had a similar problem several months ago on my laptop with the XP operating system preinstalled.

  The MS patch KB917332 helped.

  [The monitor does not light when you move the mouse or press a key after you have configured the 'Power Options' settings on a Windows XP SP2 laptop | http://support.microsoft.com/kb/917332]

  See you soon

• Awakening of the mode standby

  My computer turns on fashion 'sleep' almost hourly, when not in use. How to make this stop? I can hear it power up frequently during the night.

  Thank you

  My computer turns on fashion 'sleep' almost hourly, when not in use. How to make this stop? I can hear it power up frequently during the night.

  Thank you

  No guarantee. Try this method...

  Start > in the search box, type power options > press the Enter key > right side, click on change Plan settings > change advanced power settings > scroll multimedia settings, expand (click the plus sign +) > extend when media sharing > on BOTH on battery and Plugged IN, set it to Allow computer standby > OK
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• BSOD after the awakening of the mode standby

  Hello, everytime my laptop (Sony Vaio running Windows 7) wake mode 'sleep', I get the blue screen of death. Now, I ran BlueScreenView and checked the dump files. Apparently some driver called "ntoskrnl.exe" is the source of the problem. I looked for a solution, but apparently this driver is not the real source of my problem. I also ran the Verifier and it is said that a driver was caught corrupting the system. Can someone help me please?

  HD

  I think your question is double. I would first of all re - install the latest version of NETwNs64.sys, then as auditor blame tcipireg.sys I would launch an audit file system and just in case the scan of Malwarebytes.  If the two come back clean I think about the withdrawal of AVG and using MSE at least to test

  I would also turn off auditor by typing auditor/Reset

  Found Driver Verifier pilot failed, and it is related to the c:\windows\system32\drivers\tcpipreg.sys registry compatibility driver TCP/IP de Microsoft Corporation.

  Run a check of the filesystem (CFS)

  
  

  Open a cmd high window

  (Go to start > type CMD > right click and run as administrator)

  Type SFC/scannow

  You may need to run this upward to 3 times.

  Let us know the results at the end

  http://support.Microsoft.com/kb/929833

  http://pcsupport.about.com/od/toolsofthetrade/HT/SFC-SCANNOW.htm

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• U2413, crazy to display after the awakening of the mode standby

  I just installed and calibrated my monitor U2413.  It seems that every time I wake up the display after my computer went into mode 'sleep', I get a distorted picture.

  Most of the time if I turn the screen then turn on the monitor resets. I use a dual monitor set up and the secondary display is fine.

  How do you know if there is a problem with my monitor or the video card in my computer?

  Thank you

  Crystal

  You can contact Customer Service and ask them to arrange a changemonitor. You keep your current monitors until arrives the replacement. Test the replacement, if it has the same problem, return the replacement to Dell. If it doesn't have the problem, return the original to Dell.