Tablet Wacom nonfunctional after the awakening of the mode standby

Similar Questions

• black screen after the mode standby, windows 8

  I upgraded my laptop HP dv6 to windows 8. I get a black screen after I wake up from sleep mode. as if the monitor has no power.

  In fact, I solved the problem by upgrading my graphics card driver.

  but I was troubled because I thought that it was up-to-date.
  display the properties of the computer - device manager - adapters - NVIDIA GeForce GT 230 M
  I have a click right on NVIDIA GeForce GT 230 M, and then clicked on update driver software. He told me that the driver was updated.
  but I checked the nvidias site. There, I found a newer version.
  It was confusing. Why windows can't find this newer version?

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• ulitmate local Vista only after the mode "sleep" loses the IP address each time.

  Ulitmate Vista wired ethernet.  After the mode 'sleep', 'local only' on awake.  Loses to IP address each time.  IP address needs to be reset.

  Hi C.Jaye,

  You can check out the following link and try the steps to solve the problem:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/f21fcdda-4372-469d-b983-f4bd50d7f81d

  You can also read the following article and check if it helps:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HDD turns off after the mode 'sleep'?

  I would like to know if the hard drive would turn out or not after the mode 'sleep'.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  The computer do not hibernate unless it stops the disc after writing the hibernation file.

  Mode for similarly low-power stop discs 1

• Windows 7 hangs 3.5 minutes after the mode "Eve"

  Install Windows 7 upgrade from vista. Everything works well, but crashes after the mode 'sleep'. takes 3.5 minutes to thaw. Have a hp pavilion a6707c. Vista was faster to return to that.

  Don't know if this helps, but after I disabled the hybrid sleep I can hibernate and that it only takes 35-40 seconds to resume and everything seems to work fine.

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• U2413, crazy to display after the awakening of the mode standby

  I just installed and calibrated my monitor U2413.  It seems that every time I wake up the display after my computer went into mode 'sleep', I get a distorted picture.

  Most of the time if I turn the screen then turn on the monitor resets. I use a dual monitor set up and the secondary display is fine.

  How do you know if there is a problem with my monitor or the video card in my computer?

  Thank you

  Crystal

  You can contact Customer Service and ask them to arrange a changemonitor. You keep your current monitors until arrives the replacement. Test the replacement, if it has the same problem, return the replacement to Dell. If it doesn't have the problem, return the original to Dell.

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• L540 missing WiFi/BT after activation of the mode standby

  Hello

  I use L540 running Windows 8.1 64bits. After waking from sleep, my Intel(r) Dual Band Wireless-N 7260 does not work. Operating system detects the NIC, but Device Manager shows the exclamation point. Troubleshooting Auto does not work. There are two ways to fix this problem - stop and restart PC or device uninstallation/installation using Device Manager. All the drivers/firmware is up to date.

  Do you have an idea what to do?

  Hi Aleksandarm,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the Wifi does not work after wake up mode standby on your ThinkPad L540.

  Please check is the (allow the computer to turn off this device to save power) is checked, to proceed to the steps you have to go Device Manager expand network adapter and right click on Intel(r) Dual Band Wireless - N 7260 go to properties, click power management and change the setting.

  Can you please provide us with the Dual Band Wireless-N 7260 (R) driver version.

  Please let us know the results once you have completed the steps above.

  Best regards

  Agnes Kumar

• T520 not resumed after the mode 'sleep'.

  Hello

  When I close the lid of the machine goes into mode 'sleep'. When I open it back it does not. This happened 2 days ago, and before that everything worked very well. I can hear the fans/hdd from when I open the cover, but the statys display dark and the power button flashes. No matter what I press it does not appear from the mode "Eve". I have to press and hold the power button to force the reboot the machine lose all my currently open applications and documents. Any suggestions on what could be the problem and a fix?

  Thank you!

  Thanks for your reply. I solved the problem, but I'm not exactly sure how. I think that it started after I used it on battery until what drain you completely. It was working fine before that. I have lots of update on the system since the Lenovo Update Manager, shut down the computer, took battery and AC and pressed the power button. All assembled again and booted up normally. Now everything works. I can close the lid causing the laptop to go to sleep and he took over when I open it. No more problems at startup.

• LAN died after turning the Mode standby with Windows 7!

  I have a motherboard Intel DX58SO with the last LAN driver v15.3.  After my computer goes to sleep and then he wakes up, back to the top of the LAN adapter is turned off and it won't work again until I restart my computer. I have Windows 7 Ultimate 64 bit and I was using Windows Vista Ultimate 32-bit before with no problems. I did a fresh install of Win7 and not upgrade.  Anyone have any ideas?  Thank you for your help and your time!

  Here is a copy of the email I got from the Intel Technical Support.  In fact, I solved the problem until I got the email. Decommissioning of the bios resolved the problem for me.

  Please contact Customer Support.

  I understand the LAN adapter will extinguish after the system returns to "standby" mode on Windows 7 *.

  In this case, we recommend test you the system with BIOS version 5200. Please perform a BIOS recovery to make the update. The file can be found at:http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18938&ProdId=3018&lang=eng

  For the BIOS recovery instructions, please visit:http://www.intel.com/support/motherboards/desktop/sb/CS-023360.htm

  If the problem persists after using BIOS version 5200, please try to use driver version 14.6. You can find this driver to:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18196&ProdId=3018&lang=eng

  Post edited by: Apota

• DVD - ROM drive not detected after the mode 'sleep'

  I have a HP DVD1170, and it works very well after starting.  After putting my computer in mode 'sleep' and then he wake up, my computer took in not recognizing that there is even a connected DVD player.  He is a recent problem. I got Windows 7 since the beginning of November, and the problem only happened last week.  The drive works again after the restart, but it is not recognized if I put the computer in mode 'sleep' again.

  Hello Neohippie7319,

  Thank you for your message.  You can also click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.