Satellite A300 - 25 k - BIOS v2.00 is recommended for Win7?

Similar Questions

• Satellite A300-1FP: download a new version of Tempro for Win7

  Greetings

  Having recently done a clean install of Windows 7 64 bit on my Toshiba Satellite A300 1FP, I was wondering if it is possible to download a version of Tempro that could inform me of new driver availability, etc.

  I know, there is a version for Vista 64-bit Tempro, but I guess that it returns only new drivers for this OS.

  I would appreciate any guidance here.

  Thank you

  Hello

  You can download the Tempro from this page:
  http://EU.computers.Toshiba-Europe.com-> support downloads & -> TEMPRO monitoring tool

  The Tempro can be installed as well on Windows 7.
  This tool reports if the tools and the new pilot aired on the European driver Toshiba for you page series. It s not matter what drivers are there may be a driver for Win 7, Vista, etc.

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• Satellite A300-276 - requires BIOS password

  Hello, recently I have acquired a Satellite A300-276 with insydeh2o BIOS.

  The BIOS Setup asks for password to access. I tried some stuff, like shorthing b500 (it clears cmos, but it does not remove the password). Also updated the version of the bios to the latest version on csd (2.2). I can always start, I am not able to configure it.

  After that, I started to have a new problem (guess it was because ive cleared cmos, but I did not configured(default setup).) The power light, never off, only if remove battery/ac

  An idea for my new problem? I can live with the other
  hope you guys can help me
  see you soon

  Hello

  Regarding the BIOS, I recommend reading this article:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=11

  And which are still lit after you have turned off the laptop? Battery LED and the adapter is always on if AC/DC adapter is connected, but if you disconnect all the LEDs must be off same battery is installed.

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Satellite A300-1mz: update Bios or not?

  Hello...

  I have a Satellite a300-1mz PSAGCE and I've never update of the Bios. It is bios Insyde 1.70 (24/11/2008)

  [This | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 781 & selSho rtMod = 746 & language = 13 & selOS = 26 & selType = 4 & d = yearuploa & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = all & be lectedLanguage = 13 & type = 4 & page = 1 & ID = 67131 & DISO =-1 & driverLanguage = 42]

  Should be the latest version, right?
  If I decide to upgrade, what are the benefits? It is really necessary or just recommended?

  Furthermore, if I would upgrade with a new 500 GB hard drive, it works correctly with the bios 1.70 or new hard drive needs higher BIOS?
  Finally, what hd you advice for me between this two samsung [HM500JI | http://www.samsung.com/global/business/hdd/productmodel.do?group=72&type=62&subtype=67&model _ cd = 446 & ppmi = # 1159] * and * [HM500LI | http://www.samsung.com/global/business/hdd/productmodel.do?group=72&type=62&subtype=67&model _ cd = 373 & ppmi = # 1159] and this wd [wd5000bevt | http://www.wdc.com/en/products/products.asp?driveid=506] especially low noise and temperature?

  The current 250 GB fj-simens is very noise and she is very hot with little work...
  I would like to find a hd that does not exceed 45note ° with all night, video editing and long scan and which will be very quiet...

  Thank you

  > If I decide to upgrade, what are the benefits? It is really necessary or just recommended?
  The BIOS update is recommended only if you have problems with your laptop.
  If your laptop is running properly, then a BIOS update is not necessary!

  > Besides, if I would upgrade with a new 500 GB hard drive, it works correctly with the 1.70 bios or new HDD needs higher BIOS?
  The new HARD drive should be recognized by the BIOS correctly event it s an old version.
  It's not easy to say what HARD drive is the best.
  Usually faster HARD drive with rpm higher can be stronger and can develop more heat as a slower HARD drive.

  But in most cases it is not question of speed, HARD drive is it shouldn't t be a temperature problem

• Satellite A300-1Affichage (PSAG4E) - can't find SATA drivers for XP installation

  Hello :)

  I am tring to install Windows XP on a Satellite A300-1Affichage as in the object, but it is impossible, because I can't find SATA drivers to install during the installation of Windows XP. In the page drivers I can't find them.

  Can you help me please? Thanks a lot

  Hello

  What is the chipset installed on your laptop? If you post here, I'll try to find the sata drivers. How to decide for you, read here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  You can also install Windows Xp, mode compatible, just switch to AHCI in Bios

• Re: Satellite A300 - how can I make the webcam work on Win7

  Hello everyone.

  I had Win Vista installed on this Satellite A300 and it worked well.
  I had no problem at all.

  Then I moved to Win7 and now I'm going through the test of the work of webcam.
  I tried to install all types of drivers, even those for A500, but it would be of no use.

  So, how can I make the webcam work on my A300?

  I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.

  I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
  And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(

  Thanks in advance,

  Ozma.

  Hello

  Seems the webcam software has not been installed correctly.
  That Win 7 OS do you use? 32-bit or 64-bit?

  Here you can find Chicony webcam driver for Win 7 64 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zip

  and here you can find Chicony webcam driver for Win 7 32 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zip

  Good luck

• Can satellite-A300-23F - I install Windows 7 Ultimate instead of Win7 Premium

  Hello

  I bought a laptop TOSHIBA which has the following model: Satellite-A300-23F (operational system is Windows Vista Home Premium)

  I know that TOSHIBA offers an upgrade to Windows 7, but the problem is that they will provide me with Windows 7 Edition Home Premium that I don't want.

  So, I think to buy a full version of Windows 7 Ultimate (DVD).

  Will be no problem technique/software where I have remove the operating system of origin of the laptop and install Windows 7 Ultimate?

  Furthermore, I used Windows 7 Upgrade Advisor and the result was positive.

  Please, I need your help

  Yes, you can install Windows 7 Ultimate. There should be no technical problem. I also installed Ultimate instead of Home Premium.

• Satellite A300 is not BIOS self-test

  Hello!

  My laptop does not pass the test in the BIOS. "Toshiba Leading Innovation" inscription does not disappear. So what to do?

  The buttons are not active.

  Hello

  This means that your screen is completely black and you see anything? Which is strange, but you can try this workaround:

  -Try to remove the battery and the AC adapter
  -Wait at least an hour or overnight (no battery and adapter must be connected)
  -Reconnect battery and AC adapter
  -Try to start as usual Notepad

  If the same problem occurs, you must contact an authorized service provider. It seems to be a hardware problem :(

• Satellite A300 closed during BIOS

  Well...

  I need to use the BIOS very often, but now I have a huge problem.
  I can't stay logged in BIOS... after a few minutes, my PC turns OFF.
  In most cases, that I can stay connected in less than 1 min.

  Can u give me some advice?

  Hello

  > No, in windows are OK, my problem is just in the BIOS

  Thus, it is not overheating issue but bios it himself. Have you tried to update?

• Satellite A300 - Question about BIOS password

  Hello

  on the machine, I had a bios password set for the start.
  After that I put this password empty start it asks me for some other password enter the bios menu.
  I am able to boot up the laptop, launch Vista and do what I want to do besides enterering the Bios.

  Advice to solve this problem?
  Tried to update the bios, did not help.
  Looked in the internet for a description where to find CMOS batt. Still no idea.

  Best regards
  Rob

  Hello

  Are you sure that you have set the BIOS password?
  If you set the BIOS password then the laptop would request the password before it would start in Windows Vista.

  I think that set you the password of the user or supervisor password!

  In Toshiba Assist-> Secure you could erase that two passwords too.
  Please check this!

• Re: Satellite A300-1BZ can allocate you a memory system for the graphics?

  I swear I've read somewhere, you can in the BIOS settings, but can't find any info in the user manual. Any ideas?

  When you start your laptop, you will see a way to enter in the settings of the BIOS press F2 to enter the BIOS settings?

• Satellite Pro A30 with BIOS not fully ACPI compatible for VISTA

  I would use my beloved sitting Pro A30 to dual boot with Windows XP Home edition and Vista but having bought a 80 gig HARD drive and would divide in 2 partitions, I have now WXP SP2 running on the first partition, but try to install vista on the second I get the message: "BIOS IS NOT FULLY ACPI COMPLIANT".

  I ran the compatibility of vista online check and gave the OK and have the latest version of the bios v1.80. Do I have to buy a laptop?

  Yes. Your laptop is not supported in Vista. Sorry but there is no chance of having Vista BIOS support.