Satellite A300 - cannot use WLan

Similar Questions

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?

• Satellite A300 - 15 c - WLan hangs the simultaneous use of BT and WLan

  Hello

  I bought laptop Toshiba Satellite A300 - 15 c last month.
  I run Wifi and Bluetooth simultaneouly. Connect WiFi broke.
  Then I turn off Bluetooth and it worked perfectly.

  How do I change frequency Bluetooth or why it doesn't simultaneouly with Bluetooth?

  I have laptop of less than 10 metres from the Access Point with 8.5dBi outdoor antenna and the signal is not.
  Another Access Point is 20 meters from the antenna and it works at full speed.
  Why signal is not?

  I have Windows Vista Home Premium with the latest drivers.

  Ales Pospíchal

  Hello

  What do you mean by crash?

  > Other Access Point is 20 meters from the antenna and it works at full speed
  This means you can receive another point of access correctly WiFi signals using BT and the WLan together?
  If this is the case, then it might be a compatibility problem with your another WLan router.

  I m not very well what WLan card you have, but I recommend to update the driver WLan first and the BIOS if available.

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Satellite M40X-149: cannot use WLAN to internet connection

  Hi, does anyone have an idea why I can only connect to the internet using my ethernet cable and not the built in wirelless ability of this laptop? If I check the status on the connections Ethernet network that I still have packages sent and received, when I try the road wirless I get only packets sent and received zero. My other laptops do not have the same problem with the same router in the same room.

  Regards, Paul
  [email protected]

  Hi Paul

  In my opinion, you should first of all control the functionality of your wireless adapter. If you are able to see your local WLAN card works properly. In this case this problem may be due to wrong settings.

  Do you use WLAN WXP parameters or a WIFI client?

• Satellite L500-19Z - cannot use WLan because the driver has been removed

  I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
  I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).

  I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
  Anyone got advice to help me get out of the mess I made for myself?

  Hello

  To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
  You can find the Wlan driver here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that it shouldn't be a big problem to get this working again ;)

  Good bye

• Satellite A300 - cannot locate any wireless network

  Hi all

  I just bougth today a Satellite A300, everything works fine except the wireless access. Ethernet access works very well, and the problem is not with my wireless device since it works with my old laptop.

  It cannot locate any wireless network. It does not appear to be activated WLAN and I don't know how to enable it in the BIOS.

  The swicht wireles on the front of the laptop is turned ON, but not the function Fn + F8 appearing at all.

  Can anyone help please?

  What you mean with this WLAN is in the BIOS not enabled? Normally, you can change all BIOS options then try to activate it.
  Also make sure that the WLAN switch is on and active with FN + F8.

  Visit the Toshiba for a driver and the update to the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Win7 on Satellite A300 - cannot get the FN keys work

  Hello world

  I really need your help guys I really need working FN keys
  I recently formatted my laptop Satellite A300 with Windows 7 32 bit and the function of the keys doesn't work. I downloaded PPV since your site also I tried to download the list of other types of Toshiba flash card utility.

  When I try to install it on my Toshiba he repeated to me invalid serial No.
  Why is this > also still FN keys doesn't work. Please help me. What should I do?

  Sometimes when I press FN + brighten it works but nothing appears on my laptop as it was when I had xp too, I bought my Toshiba of UAE UNITED.

  Hello

  I have satellite A300 too and use it with Win7 32 bit. Everything works perfectly. It is very important to install all the drivers, tools and utilities, following the right installation order, so here is the list how I did it:

  Satellite A300 (PSAG8E) and clean Win7

  -Win7 (original Microsoft installation disc)
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  Win7 works well and I am very satisfied.

• Satellite A300 - cannot find the drivers for Windows 7 64 bit

  Hello!
  I'm of the Greece so I apologise for any errors of syntax, I can do.
  My girlfriend has the Satellite A300 PSAJ4E but his hard disk was destroyed, so I bought him a new (WD Scorpio Black 500 GB) and I downloaded the original Windows 7 MSDNAA to install on the laptop.
  The problem is that it doesn't have the drivers cd so I have to find them on the internet. The other problem is that on the Toshiba official support site it is not found the laptop or the drivers for it.
  So please help me find them. Or tell me if I can insert some of the other Toshiba laptop drivers to it.
  I am ready to format and everything and I don't have the drivers.
  Thank you!

  PS. I found this site but I don't know if it is normal to download them from this site and also, I don't know if I should because I will insert Windows 7 64 bit.
  http://driverswin.com/satellite-A300-psaj4e-drivers-Windows-7/

  Hello

  To download drivers use the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  There you can find your model of laptop and all drivers, tools and utilities for it.
  Can find you it?

  If you need help or assistance installation and the installation order please let me know.

• Satellite A300 - cannot install Ubuntu - empty flashing command

  Hello

  I want to install Ubuntu 11.10 on my Satellite A300 (psag4e), but when I insert the installation CD, boot hangs after this part of Toshiba with a flashing empty command line.

  What should I do?

  The value of the default BIOS and try again.
  Are you using the original Linux installation disc?

• Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

  {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

  This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

  Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

  ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

  Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

  I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

  Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

  This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

  Thank you!
  David
  Edinburgh, UK

  Hello

  I think the password loss is the BIOS password.
  I m wondering why this password is displayed when starting if you have not set it

  However, the point is that the BIOS password can be removed if you n t know this password.
  Unknown BIOS password can be removed by a Toshiba authorized service partner.

• Satellite A300 - cannot install on XP sound drivers

  Hi all!

  I have a Toshiba Satellite A300 1 2 Notebook, and on Windows XP, the audio driver does not work. On windows Vista, I have no problem. The laptop had no Windows Vista preinstalled. The sound card is Realtek. I tried the drivers found on the toshiba Web site, from the realtek site. It doesn't work in all cases.

  Can someone help me?

  Hello!

  If you have a sound card Realtek and Windows XP, you must check out these articles from the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  It is a known problem and if you use the forum search, you can find a lot of discussions about this.

  Good bye

• Satellite A300 - cannot access the Internet more

  I would like to re - open this thread because I am facing a similar problem.
  I have a Toshiba Satellite A300 and I installed Windwos 7 two months ago. Yesterday, his suddenly, my laptop could not access the internet more, but the wireless lan connection worked well.
  Until this malfunction appeared in the list of active connection, there was only one entrance, my network classified as "Home network" but now, instead, there are two entry, it is my network classified as "Home network", the other is a 'unidntified network', classified as 'Public network '.

  I am sure that the problem is in my laptop and not in the adsl router because:
  1 - other people to join my network wireless with normal internet access.
  2. the problem always occurs with other networks currently used by third parties to connect to the internet.
  3 - the problem always with cable connection

  Windows reports no error.

  Thanks in advance for any assistance.
  Andrea

  Hello Andrea,

  To me it seems that you don't have an Internet connection so you always connected to the router but if you can access Internet t. You should look in the router configuration to see if it s is connected correctly.

  Try also updating the firmware on your router and disable security features to test this situation.

  Last but not least, you should try too update the wireless adapter driver. It can be downloaded on the official page of Toshiba. :)

• Satellite A300 - cannot identify a model of wireless module

  Hello

  I'm trying to install the drivers for wireless LAN for windows XP on my Satellite A300 (PSAGCE) 1I4. Now I tried the following:

  11.5.0.32-Intel
  9.0.4.37-Intel
  1.2.4.41 Intel
  Atheros
  WLAN Driver Realtek

  Neither worked (device not recognized network)

  Is the hardware ID
  PCI\VEN_8086 & DEV_4232 & SUBSYS_12018086 & REV_00\4 & 318 470AD & 0 & 00E1

  Can you help me?

  Thank you

  Kind regards
  Oleksiy

  Kody is right. I found the track information shown in the specifications of the laptop - Intel 802.11agn ShirleyPeak(1x2) minicards.

• Satellite P200 - cannot choose WLAN hotspots

  My satellite P200 cannot choose networks wireless hotspots. It came with pre-installed Vista which I've upgraded to Windows 7 proffessional.

  What drivers do I need to fix this? Download links?

  Hi Mike,.

  This only happens on sensitive areas or on your router at home too?

  However, you can download drivers WLAN here:
  http://APS2.toshiba-tro.de/WLAN/