Qosmio G30 - no sound on HDMI output

Similar Questions

• QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

  Hello-

  Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

  I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
  I have all the latest drivers and BIOS downloaded from the Toshiba site.
  I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
  Nothing works!

  It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

  Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

  Thank you

  Mark

  It is a Toshiba FAQ:
  + No signal on HDMI on Qosmio G30 under Vista +.
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

  But he of described the problem with Vista OS.

  However, the screenshot shows the codec high definition audio Sigmatel.
  I guess it is the same device that you can see in the menu drop-down

  Maybe you have to activate it.

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Qosmio G50 not sound on HDMI

  * Qosmio G50 not sound on HDMI *.

  Hi all

  I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

  I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

  I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

  Realtek HD Audio device is installed driver version 6.0.1.5923
  Realtek HDMI Output is selected as default playback device.
  Test gives me graphic response (flashing) but no sound from my TV.
  Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
  I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
  I tried to change the HDMI view only but what does nog change anything either.

  One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

  Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

  Please help me. All suggestions are welcome!

  I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Perhaps, it allows you to...

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Qosmio G30 - no sound output HDMI with Plasma

  Hello

  I tried to coonect my g30 with a Plasma TV, I get that video without sound

  I changed my defult for digital output device (SPDIF Out) device, but it did not help

  I don't have that in playback devices is:
  Speakers / headphones
  Digital output device (SPDIF)

  Help, please

  Hello

  I don't know what Qosmio G30 exactly do you have and what operating system is preinstalled but maybe that this document can help you:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Check it out!

• Qosmio G40 - no sound on HDMI

  I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.

  Hello

  I found a very interesting document from Toshiba which provides a step by step instruction how connect a Qosmio G30 to a TV using the HDMI port and why there is no audio over HDMI on Qosmio G30 under Vista.

  [No audio over HDMI on Qosmio G30 under Vista. | http://APS2.Toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm]

  _The paper said: _

  (1) open the "Control Panel" to click 'Start'-> 'Settings'-> 'Control Panel '.
  2) click on 'Hardware & Sound.
  (3) left-click on "his".
  (4) a window appears where you can select the playback device. Left click on 'device of digital output (S/PDIF).
  (5) after selecting the digital output, click on 'Set as default', then 'apply '.
  (6) now the signal must be properly transferred correctly to HDMI.

  Check this box:
  1. fix a television for the Qosmio G40 HDMI while both units are State in a "powered off the coast.
  2. turn first on television and then the Qosmio G40.

  _Notes on the HDMI connection: _

  S ' Please refer always to the manual of your TV on how to select and activate the TVs HDMI input port.
  -Please ensure that TVs equipped with a HDMI input port can be connected to the computer.
  S ' Please use a HDMI cable (NOT supplied with the computer) commercially available to connect to the TV and the computer.
  -Not all TVs equipped with a HDMI input port have been tested for compatibility with the computer. Therefore, does not guarantee that the HD DVD-video content can be displayed on any TV with an HDMI input port. Contents of the DVD - video HD may not display correctly on some TVs.
  -Qosmio G40 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.

  Good bye

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• Qosmio G30-102: sound distortion occurs mainly when games are played

  Does anyone know how to solve the problems of sounds with the Qosmio G30-102? I installed all the drivers in Vista. Sound distortion produced mainly when games are played. Also reinstalled direct X9.c. Thank you

  Sound problems appear only while you play games?
  I think that this laptop has been delivered with Windows XP MCE has this same phenomenon occurs on Windows XP?

  Driver sound installation or update? It seems that the Toshiba driver page provides the audio driver for Vista for Qosmio G30-112 PQG32.
  The latest version is a pilot of its sigma 6.10.5324.

  By the way; Control Panel audio SigmaTel provides some useful parameters.
  There, you should turn off (disable) the power management!
  In addition, you can try to play a little bit with the digital Dolby Virtual Speaker dolby and pro logic II parameters.

  Check it out.

• Qosmio G30 - 148 Sound drivers for win XP

  I formatted Qosmio G30-148 and I install Win XP Professional, but I would not find drivers for the sound what I can do?

  You must be kidding man!

  Are you sure that you have checked the site driver Toshiba correctly?
  The Qosmio PQG30E series driver sound Win XP MCE Sigma and the audio Vista driver.
  The MCE version 5.10.4889.0 was released on 20/02/06!

  Everything there!

• Qosmio G30 - 126 Sound drivers for win XP

  I install Win XP on the second disk win xp professional, but I would not find drivers for thw sound system what can I do? I install Win XP MCE?

  Hello

  Why you n t trying to install this XP MCE drier sound? ;)

  Choose the Qosmio G30-126 PQG32E series in the Toshiba driver page and download and install the driver audio Toshiba Sigma XP MCE! XP MCE is the same operating system uses the same file system under XP home or XP Pro. I am convinced that the driver will run!

• No sound from HDMI output

  so I just plugged my laptop hp Pavilion in my LCD tv with a hdmi cable

  sounds and music can be played on the laptop when it is connected to the tv, but no sound on the tv at all.

  in my sound playback tabs, the device TICK is out HDMI NVIDIA.

  is there a solution to this? (Help please):

  Hello

  HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from the sound card of your computer directly to the TV. Otherwise, you need to connect the different audio signal to an output device, such as external speakers or your stereo.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Qosmio X 500 and an HDMI output does not automatically

  Sorry for my English...

  Hello.

  I have a Qosmio x 500 recently that runs on Windows 8.1

  Previously, when I plugged the PC to TV hdmi cable, I had (Samsung TV), a beep on the PC, binding and done automatically? the TV is on (if it was in standby).

  I could even control the PC with the TV remote control, put a film, break, etc... Super convenient!

  Source indicated on the TV Anynet + pc Toshiba.
  And when I switched with the TV remote control at the TV, the screen of the PC is turned on.
  *
  Off, despite attempts repeated at least 5 software (drivers)? Different certified Toshiba HDMI, I didn't do it and I have to manually switch to see the PC on the TV (choose the HDMI source on the TV).

  HDMICtrlMan is a folder where, after installation, there are:
  ChangeOutput.exe
  HCMSoundChanger.exe
  HDMICtrlCfg.exe
  HDMICtrlMan.exe

  But nothing works!

  I've also updated the audio and video driver: gforce gts 360 m
  But now I want!

  And I don't know the progression of the computer when you connect an HDMI cable (depending on the graphics chip?).

  If someone has an idea or experience of this problem, thanks in advance

  You have installed Windows 8.1 on Qosmio X 500 but the Win 8.1 is not possible on this model of laptop and so there is no drivers Win 8.1 available.

  The page of the Toshiba UE driver provides control manager HDMI and remote Manager for Win 7.
  HDMI Control Manager is required for the HDMI controller and TOSHIBA Remote Control Manager improves the support for a remote control on your Qosmio X 500.

  I guess that you are not able to use all the features of laptop HDMI due to lack of software for Win 8.1.

  Maybe you can try the software and drivers Win 8.1 released for other series of Qosmio as Qosmio 875

• No sound via HDMI output portable computer connecting to TV

  Original title: laptop HDMI to the TV - no sound
  
  Until a few weeks ago, it worked fine: I simply plugged the HDMI cable between my laptop and the TV and got audio and video on the TV (after the correct AV channel on the TV).  Now, I only get the video.

  I looked through other issues on this forum but have not found anything that works.  I hesitate to change too much, as it has worked before.

  I see two devices in my "playback devices": "Speakers" (default) and "SPDIF Interface.

  Laptop: Packard Bell Easy Note TJ65 Pentium Dual - Core CPU

  Windows 7 Version 6.1 (Build 7600)

  TV: Plasma Panasonic TX-PS42S10B (HD Ready)

  Any ideas, anyone?  I think that as I made very few changes, the fix should be simple.  I have not yet tried another cable, but I'm sure it's OK.

  BINGO!

  (So I had to go JustAnswers.com & pay £28, but I got the answer right away... well I went earlier!)

  Happy to share, though, for anyone faced with this annoying problem...

  I went to Device Manager (Start button > right click on computer and selectManage) and uninstalled the device calledIntel(r) Audio high definition HDMI.  Restart the computer.  TV connected with an HDMI cable.  Right click on the little speaker symbol & slected playback devices.  Panasonic TV shows as a device.  Right click on it & as default.  I got my sound back & all works correctly.

  It seems that the driver had been updated somewhere along the line and is no longer compatible.  Following this process makes the computer to replace its own driver.  All this time I was looking for a newer driver, and what she wanted was old!

  For the record, the device in the Device Manager is now called the high definition Audio Device. No mention of HDMI!

  Also, if you right-click on the desktop, you get a wizard to set up the TV interface.