Satellite A300 PSAGCA - blue screen using Windows 7

Similar Questions

• Satellite A300-1MX - blue screen after installation

  Hello
  I have a problem with the Installation of Windows XP. I set Compatibility Mode and everything.
  But at the end of the Installation comes the blue screen and windows stopped.
  "An important topic for the operating system stopped unexpectedly.

  I loaded the Toshiba SATA drivers, but they don t work.

  I put t know what to do, please help me.

  And please forgive me my bad English

  Grettings Infi38

  Hello!

  You need to install SATA drivers before you install Windows and if you have compatible SATA mode you t need SATA drivers but you have lost performance a bit.

  So I want to reinstall Windows in AHCI mode, you need to download the Toshiba Storage Manager (http://eu.computers.toshiba-europe.com).
  Copy the driver on an external floppy drive and press F6 after starting the laptop to CD or create your own installation with nLite (http://www.nliteos.com/) disc.

  Good bye

• Satellite U300-159 - blue screen after Windows 7 installation

  Satellite U300-159. I did a clean install of Windows 7 Home Premium 64-bit. Since the upgrade, it has blue screen every time you start after approx. 1 min. blue screen * STOP: 0x000000f4. The computer restarts it self after a while.

  I checked memory with 2 different programs. No errors. HARD drive checked - no error.
  Updated the BIOS, but get the error 1275 attempted using Toshibe updateprogram code.

  Anybody have ideas, what to do?

  Hey,.

  I m a bit confused about your ad first, you wrote that you did a clean install and then you wrote something about an upgrade
  What's true?

  Anyway, if you see the blue screen in safe mode too? If this isn't the case, it seems to be a driver issue because in safe mode no drivers will be loaded.

• Re: Satellite A300-29n - blue screen appears during installation of XP?

  Hello

  I'm working on windows vista and no problems
  When I tried to put in place XP on the machine, after loading windows files
  It was written "the installation program starts windows.
  everything was fine
  a blue screen appeared (a problem has been detected and windows has shut down to prevent damage to the computer...)
  Please help me
  Thank you

  Hello

  Go to BIOS (press F2 during the laptop turn on) and change the compatible SATA AHCI mode.
  Save the changes and try to install again the Win XP on this laptop.

  Good luck

• Need a video driver that is compatible with WDDM for a laptop Toshiba Satellite P20. My screen, using Windows 7, is a mess.

  Other web sites "might" be able to guide on how to update the drivers for a laptop nVidia.  A 'good' web site is Guru3d.

• Can I use European 2.1 BIOS update for Satellite A300 PSAGCA?

  Hello

  My toshiba's Satellite A300 PSAGCA-02Y010, bought in September 2008.
  I want BIOS update latest version 2.10 for windows 7, but in the Web of Toshiba-NZ site, I can only find the version 1.9, I find 2.10 for A300 Toshiba Europe, but Europe models are all different from NZ.

  My question is: could I use this BIOS 2.10 europe in my toshiba A300 nz? Thank you.

  Hello

  I would not recommend using a BIOS that is not released for your laptop model.
  There are a lot of different series for laptop on the market.

  You must use the BIOS that is designed exactly for the portable model!
  As you know, the BIOS update is a reasonable process and can damage the ROM chip using BIOS wrong!

• Impossible to install Vista on Satellite A300 PSAGCE - not ACPI compliant

  Hello

  I'm recovering the laptop from a friend.
  He has installed Windows XP on its Satellite A300 PSAGCE and concluded that of course XP 32-bit Windows does not support the full functionality of the laptop.

  Now I wanted to reinstall Vista that came with it. I have two recovery DVD but when I wanted to start them (them two DVDs) I always get the error message that the system is not fully ACPI-compatible.

  Now of course this laptop should work with Vista and the provided restore DVD should work as well, no?
  I tried to download a Bios nw, but it seems 1.10 is the most recent.

  I also can't find all the ACPI settings in the BIOS that I could activate.

  Could someone help me?
  It is really urgent and driving me crazy!

  Thank you!

  Hello

  Strange! Usually, if you have created the DVD recovery Toshiba using the TOSHIBA Recovery Disc Creator then everything should work correctly and you should be able to install Vista on this A300!

  I put t know if you have changed something in the BIOS or elsewhere, but you should access the BIOS and should define the default settings.
  Then try to boot from the recovery DVD Toshiba again.

  Good luck

• Installation of utilities Toshiba on Satellite A300 PSAGCA

  Hello

  I'm in the process of Windows XP on a Toshiba Satellite A300 PSAGCA-09U01N.

  I downloaded all the drivers and install them, and now I'm trying to install all the application/utilities toshiba so that they all work.
  I tried installing them in diffirent orders but continue to flock to the top with the same problem.

  The [FN] + [F1-12] (Hotkeys) are not this what do here as it should be, and some of them do any work as [FN] + [F2] and [FN] + [F6-7].

  Anyone know the right order in which they are installed or offer any help?

  I downloaded my form of drivers here: http://www.mytoshiba.com.au/support/notebooks/satellite/a300/psagca-09u01n/download?os=22

  Any help would be appreciated.

  Hello

  You need to install TOSHIBA common Module
  The common Module software is required and must be installed first.
  In my case it worked properly on another laptop from Toshiba!

  PS: There is a BIOS specially for Win XP
  Should use it if you are running Win XP

  Welcome them

• Re: Satellite A300 PSAGCA-03C010 - downgrade from Vista to XP

  Hello

  I'm really new to all this, so I hope that will not ask a question that has already been answered :)

  I bought a laptop Toshiba Satellite A300 (model PSAGCA-03C010) in October 08. It came with a preinstalled version of Windows Vista Home Premium.

  Initially, using Vista was not too bad, but it happened at a point now where his things slows down and is really frustrating. Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.

  First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?

  Also, I am concerned about the Wi - fi, bluetooth, finger scan and HDMI applications - will this work with XP?

  Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?

  Thanks in advance and again once, apologies if these qns have already answered in other posts (im not too technical).

  Tamara

  > I'm really new to all this, so I hope that will not ask a question that has already been answered
  In many cases, these questions have been answered already and you might find useful views by using the Advanced ;) search option

  > Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.
  Tools and Vista drivers are not compatible with Win XP. If you want to install Win XP and want to use all the features of the laptop you must make sure that the Win XP drivers are available for this model of laptop.

  Satellite A300 PSAGCA seems to be an Australian model. The drivers are placed here:
  http://www.ISD.Toshiba.com.au

  I checked this and found a few tools and drivers for this device.

  > First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?
  No, you can not use it because it belongs to the Vista operating system preinstalled on your laptop.

  > Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?
  Yes, the recovery disk allows to reverse the laptop back to factory settings.
  You will get the same as on the first day of purchase

• Re: Satellite A300 PSAGCA: how to install Win XP as 2nd OS

  Hey any reader for the first time and shows for the first time.
  My comp is the Satellite A300 PSAGCA-02U010

  You 2 questions, hopefully someone can help me with.

  The issue of the first: like many people, I hate Vista.
  How can I run XP as a second OS that don't live my warranty?

  2. the volume level is not very strong (sound) when you watch a DVD etc. I tried different settings, and every time I do I have to restart to take effect, which is a pain that vista is slow to restart. I have downloaded the driver, but noticed that it is exactly the same as what is installed already :(

  See you soon

  > How can I use as a second OS XP who don't live my warranty?
  Installing programs or operating system would not avoid the warranty!
  You can install the Win XP as second OS without fear.

  But before install you anything, I would recommend the Toshiba recovery disc creation!

  With regard to the sound:
  As far as I know the parameters which are changes in the player are not not in trouble. You must increase the volume of every time when you start the software again.
  But have you tested different actors? For example, VLC player is a simple and free tools.
  I recommend to test

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Satellite M30X-118 blue screen of death

  Hi all. Please help me with this one. The problem I have is this. After power on and loading windows of windows (the version of picture Toshiba) will crash after a few seconds with a blue screen. Windows reports that an ATI driver fell into an infinite loop and the computer stopped to avoid damage. I use the latest toshiba BIOS (1.9), ati drivers and chipset and I did a virus scan. I also tried to reinstall windows from the CD.
  What is strange is that after 2 or 3 restarts the computer works perfectly. No more reboots and not problems with the ati drivers. I even tried a few 3D games to be totally convinced. The problem is most obvious when the computer has been closed for a long time (hours or days). So maybe it's a thing of temperature. Maybe a graphic component does not work properly in times of low start-up and after a while when the temperature rises, it's ok? What do you think?
  Finally, after the exit of the hibernation mode or standby driver ati fails and that the resolution is back to 640 x 480. A reboot but corrects this problem and I don't know if it's relevant.
  Thank you for your time!

  Hi George,.

  I don't think overheating is the cause of your problem. It resembles a suspect hard drive. Usually after a period of inactivity the drive has problems reading of the driver file.

  You could try to reload the ATI driver (this should load the driver to a different location on your hard drive) and see if the problem persists.

  You disk defragmentation will not help because the drivers are usually installed in a non-transferable area of the player.

  I strongly recommend to take a safe backup of your user data at the earliest.

  HTH

• Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

  When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

  I also have this error report for blue screen event.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1
  BCP1: 85212696
  BCP2: 00000000
  BCP3: 0000FFFE
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini020712-01.dmp
  C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
  C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================================================

  BCCode: 01 0x00000001

  The most common cause of this Bug_Check is drivers then use the methods in the next message
  updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
  with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
  still in force. (See how to update the drivers and run driver verifier in the next message).

  --------------------------------------------------------------------------------------------------------------

  Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  LeAPC_INDEX_MISMATCHErreur settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The address of the system (system call) function or a worker routine.
  2	The value of the field ApcStateIndex of the current thread.
  3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
  4	Type (system call 0-, 1 - routine worker) of the call.

  Cause

  The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

  BCCode: 01 0x00000001<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

  ====================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.