Satellite A300 - question post Windows 7 upgrade

Similar Questions

• Satellite A300-1RZ - stucks Windows 7 upgrade on the first step of the installation

  Hi all

  I'm Italian, I an A300 Satellite with Vista Home Premium I paid 30 euros for the free upgrade to Windows 7, which reached my House yesterday. I got 2 DVD:
  -1 to 'prepare' my phone: * TOSHIBA UPGRADE DVD *.
  -1 upgrade operating system: * WINDOWS 7 HOME PREMIUM UPGRADE DVD *.

  + The first step: + use the first DVD: all right, "the system is ready to install Windows 7, insert the second dvd. When I insert the other, I accept the license and after that, the first step of the installation: * "check system compatibility."
  * These steps is my problem.*

  I reworded more than 10 times the praxis but it blocks at this stage, I left the laptop at this stage, throughout the night, but today morning she was always there, no progress, it is clear that there is a problem, but I do not understand if it depends on my cell phone or on the DVD.

  I tried to boot the laptop with Windows 7 DVD inside, start the system by the DVD, but it ask me to format the partition where are the files of vista and is not an upgrade. I bought an upgrade just do not remove previous programs and do not format the first partition of the drive of my laptop.

  How do, which can, I turn to?
  Does anyone have the same problem?
  Does anyone know to escape?

  thanx 4 your answers

  A Dread

  Hi a Dread

  That s strange because I didn't have a problem with my Toshiba upgrade disk. Everything worked fine! :)

  I put t know if you read this, but here's an update statement step by step:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

  As you can read before the upgrade, you need to remove some programs if they are installed on your computer.
  Check this box!

• Satellite A300-1CO - missing Windows XP Drivers

  Hello

  Have a seller assured me that the Satellite A300-1CO (PSAJ4E) is fully compatible with windows XP, I just bought a.

  After a few hours of the depth of evil, I managed to install Win XP SP3 and get almost all the components under it.

  I have just 2 missing... Ethernet and a mass storage device (I think that its the card reader).

  Howerver, I had installed the following drivers:

  Card reader controller - O2Micro
  Driver LAN - Marvell

  Two components should not work properly?

  And Daniel "controls - Toshiba" for windows ON THAT XP won't install win XP?

  Another question... There are components that have more of a driver more... which ones should I choose? The most recent?

  Best regards.

  Pedro

  The Ethernet device could be LAN wireless, and mass storage could be the Intel Matrix Storage Manager or Intel Chipset. You have installed these drivers?

  Also install common modules, if it is available for this model.

• Satellite A300 - w c:\windows\system32\rpcnet.dll and rpcnet.exe recognized as Trojans

  Hello

  while I was scene analysis antivirus on the laptop Satellite A300-15 b, my software recognized w c:\windows\system32\rpcnet.dll and rpcnet.exe as Trojans and deleted. These files are essential?
  How can I get back them? If someone of you cannot answer, I'd appreciate any help.

  Hemoth

  What anti-virus software are you using and have you updated to the latest list of detection of virus/trojan?
  To retrieve these files, you can use the windows repair console, which can be entered by pressing the F8 key before the windows operating system starts.
  Will take you to a list where you repair or somehow mode called option.

  If this does not work, you can try using recovery media.

• Satellite A300-14 - after Windows 7 installation no modem not recognized

  Hey guys, how are you?

  Unfortunately, I discovered today that the Modem is installed with the drivers on Windows Vista 32-bit, but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64 bit and: no modems at all! I don't know why Device Manager is unable to see and my capture device.

  I need help guys.

  Thank you.

  My laptop is: Toshiba Satellite A300-14

  Hi dr.anm,

  Have you tried to reinstall the modem driver? I checked the Web from Toshiba site and I can find a driver of modem for Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite A300-15 b - Windows 7 and webcam driver

  Hey

  I just did format on my pc Satellite A300-15 b of windows vista (32 bit) to windows 7 (64-bit) Enterprise edition Greek! But my webcam driver does not work.
  At first it worked, but the last 4 days it not. :( What can I do?

  Thank you

  Hello

  Try to reinstall. Before you remove it, reboot and clean registry with Ccleaner and install from:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  If you do a search of the forum, you will find many threads on Webcam failure.

• Satellite A300 - installation of Windows XP

  I need help for my recovery. The model is a Toshiba Satellite A300. To retrieve and recover Vista's partition E.
  I do Windows XP in the C partition.

  When I install my back I can't
  When I install I get it back press kay F9 and it not install

  When I install Windows XP CD I closed my SATA
  I need now my SATA is good from my computer or not

  I'm frome Egypt and I'm so sorry about wrong everyone

  Hello

  To be honest your ad is a little difficult to understand

  What you mean by install get it back? You want to install now Windowsxp or the Toshiba Recovery disk?

  If you want to install Windows XP, you need the SATA drivers. You can find it in the Intel Storage Manager package.
  Here is a useful document of Toshiba on this subject:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  But before you install Windows Vista, you must create the Toshiba recovery disc. Then you can restore the factory settings (Vista) at all times. If you don t have the Toshiba disk recovery you can restore the factory settings with the folder HDDrecovery on the E partition. You have the Toshiba recovery disc!
  If you didn t that still run the Toshiba recovery disc Creator for this before installing Windows XP. It only takes a few minutes!

  Check it!

• Satellite A300 - question about the MIDI connection

  Can someone help me?

  I have a computer laptop satellite A300 and want to connect it to my computer to stream TV and movies.
  I don't see where I would plug MIDI to my computer.
  Is it possible to do with this model?

  If not, can I get a plug that would stretch the capacity of the computer or I have to get a new computer?

  Thank you
  Carol

  Sorry, but I m confused
  You said you want to connect the Satellite A300 to a computer
  Is this correct?

  You can connect two computers via a LAN cable. But I have no idea why you talking about connecting MIDI (Musical Instrument Digital Interface)

• Satellite Pro C660-2DJ - Windows 10 Upgrade and lack of Chicony Driver

  Well, Toshiba said the Satellite Pro C660 2DJ is not able to upgrade Windows 10. This time I found statement opposite on other sites and installed it. I'm happy enough, because I use it. Ah there is always a but... the Chicony USB 2 Laptop camera is registered as a device, but with (!) in yellow showing no driver. I found a driver for this device, but under Windows 7 64-bit.

  It would be very risky to install an old original driver now that Windows 10 is fine? As a rider to this, I know now there are thousands of people who were sure that their machines would be upgraded to Windows 10 and they are desperate because very little work. Thoughts, anyone?

  Win8 Toshiba does not offer driver webcam more as the operating system uses standard Windows driver.
  I did not pass my S50 - B Satellite so I do not know if I have an identical problem on my machine.

  I'm really interested if another user of the forum has the solution for this.

• Satellite L300 - beep after Windows 7 upgrade loop

  Hello

  I have the laptop next

  Toshiba Satellite L300
  Number of model PSLB8E - 15W007EN
  Serial 99086404Q

  I'm trying to upgrade to windows 7, it completed the process of installation, but when I boot, the laptop is a continuous loop off beep (sounds like she a loop of 22 beep... If that's any help), then shows a blue on the screen if you have installed new hardware, etc. So, I go to repair system that fails, please someone help me.

  Thank you

  Welshie

  Hi Welshie_1,

  These beep codes mean usually there is a hardware malfunction detected

  You can start in safe mode?
  Have you noticed the beep code when you go into the BIOS too?

  You can install Windows recovery disk Toshiba or you get a bluescreen too?

• Satellite L350 - error on Windows 7 upgrade

  I have a Satellite L350 & Toshiba DVD upgrade. I get an error message when he straightens to uninstall Toshiba supervisor password before installing Windows 7.

  Error message reads

  Code 0x7e error-5004
  > > SetupDLL\SetupDLL.cpp (1966)
  pAPP supervisor password: TOSHIBA
  TOSHIBA PVENDOR
  OUT 4B1E87C3-00DE-4898-8E39-E390AAEF2391
  $9.1.0.429
  @Windows service Pack 2 (6002) BT_OTHER 0.0

  Help please!
  Thank you
  Martin

  Hello

  Have you tried to uninstall Toshiba supervisor password yourself? Access control-online software Panel. Here, you see a list of all installed applications and there you can delete it.
  Check this box!

  Maybe you should also try to clean the registry with CCleaner

  Welcome them

• Satellite A300 - cannot start Windows and cannot fix it

  Hey

  first of all I have to say that my English is not the best ;)
  But I hope that you undersrand my problem and help me please

  Today I bought a laptop A300
  I have the second HDD formatiert
  Now I can start windows and I can't fix my system and install new windows

  Please help me!

  and sorry for my bad English ^^

  To be honest I don t understand your question
  If you have formatted the drive HARD second it shouldn't be a problem at startup of Windows.

  You burned the recovery disk? Then boot from it and install the laptop.

• Question about Windows 7 upgrade program

  Hello, I ordered my Windows 7 for my laptop. Now there is a little problem that I have, I have on my hard drive the HDDRecovery, but not writing the DVD recovery software, what can I do in order to have the upgrade, is that it works only as an UPGRADE or works also as a clean install.

  I changed the Vista I used with LINUX completely, I returned to Windows 7 RC and now if I ordered this Windows 7, I would like to know more about it.

  Hmmmm... display short, but everything seems to be quite complicated.

  -Computers new Toshiba laptops are delivered with the settings and saved the recovery image of HARD drive on the second partition.
  -Toshiba recovery disc creator is available with factory settings only and cannot be downloaded.
  -If you have changed your OS and installed your own version of the HARD drive recovery procedure will no longer work and your folder of HDRecovery with the data is useless.

  In my opinion you did everything that can be done completely wrong.
  After the first departure first step should be the creation of recovery disks. This disk can be used for the installation of the OS later if you want to have once again the factory settings.
  Toshiba upgrade kit is designed to work with the preinstalled Toshiba recovery image, so I don't really know if you can install it on your own installation of Vista.
  Test it.

  New install with upgrade disc? I can't confirm this. Can you please test it for us?
  Your original recovery image is screwed up and useless anyway you can do all sorts of tests.

• Re: Satellite A300 - Question format. XP. Reinstall Vista.

  Hello

  I would like to know if I install Xp delete all partitions in my hd (now I have three, two regular and one not show).
  The Toshiba Recovery disk recreate the original partitions and install on Windows Vista?

  I'm Spanish, but I can read English.

  Thank you very much.

  Arturo.

  Hello

  Before starting to explain how it works, I would say follow: first of all CREATE recovery DVDs using Toshiba Recovery Disk Creator. Do not forget.
  With the help of this DVD, you will be able to install Vista and have factory settings once again.

  When you start installation of WXP all three partitions appears and you can select the destination for the installation of Windows XP Home edition. If you choose the C partition two others is not deleted.
  Later, when you want to install using created Vista recovery DVD disc HARD integer is deleted and formatted.

  Any other questions? ;)

• Satellite A300 - question about Vista license key

  Hi all,

  I bought an A300-149 with preinstalled Vista.
  One of my friends told me, the partition that was used to install Vista is not useful, it consumes space from my HARD drive, so I deleted the partition and rearranged the partitions that I was going to use them.

  I just found out it's a big mistake to do that, because the contained all partition drivers and Vista with the license key.
  I'm losing my windows license, if I eventually have to reinstall it? (I have the label on the underside of the computer with the key...)
  I can not download the content of this partition (in the form of an ISO standard) somewhere in this site? (and use the key to the label, as it is usually done with the software)

  I paid for this OS... so I don't understand why I have not received a DVD with the software? (When I opened the box, I was looking for the DVD and I wandered why he is missing...)
  It's frustrating...

  Waiting for your answers,
  Thank you

  Hello

  It's really stupid situation now, but certainly not frustrating.
  Here a few facts to better understand:

  New Toshiba laptops are delivered without recovery DVD and images of recovery is recorded on the second partition. All of us must create own recovery media. To do this, this Toshiba has designed little tool called creator of Toshiba recovery disc. With this tool, you can create recovery recovery CD and DVD. When you have these media you can do with the data you want. To install Vista over these media must be used.

  So many people may forget or simply ignore it. Because of this Toshiba has designed reminder with the trace message:

  Because of this, Toshiba has designed little reminder that will be shown in short time after first start with track contents:

  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need repair *.
  * your computer in the restaurant to original factory State, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose 'Repair your computer' *)
  * and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator" to *.
  * ensure hat you are able to restore your computer to the factory installed state, even if your computer is severely damaged.*

  I can't imagine you didn t see.
  In any case, your friend probably has no idea how it works, and now you have a problem.
  To be honest you have no problem, but the additional costs. You can order the following original Toshiba disk link given by Akuma, but you must pay for it.

  Bye and good luck!