Satellite T130-11u with Intel CPU Q300 does not start

Similar Questions

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Satellite A300D (PSAKCE) - BIOS is damaged and does not start

  I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
  I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

  -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
  -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

  Thank you...

  Hello!

  In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

  I have the toshiba Satellite L650-16w
  the version of the bios is 2.40

  I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

  I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

  You set the default BIOS?
  Make sure in the BIOS, press F9 and then save the changes by pressing F10.

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite L555-11U & L555-12V: FALLOUT 3 does not---> Solution

  Hey,.

  Some people here has the problem that the game chrash. the problem is that the game uses more than 2 cores for the game, the solution is that u activate only 2 hearts and the game works like a charm ;)
  Follow these easy steps to solve the problem:

  1. go to the folder Dokumente\My Games\Fallout3\ «»
  2. open the FALLOUT. INI and FalloutPrefs.ini with the editor
  3. Add the following 2 lines
  bUseThreadedAI = 1
  iNumHWThreads = 2
  4. save changes
  5. play the game, it won't freeze more :)

  See you soon!

• Satellite 4070CDT: gives a 'click', but it does not start

  Dear Sir

  When I start my laptop, the laptop gives a kind of 'click', but it starts. The only thing I can see on the laptop is that LEDS are green (ok) and when I push the power button, leds are all green as he wants to starts, but then only the light flickers up and down - ORANGE. I found the user manual using the "Toshiba user manuals" link on the support Download Center page & and the manual says that the problem should be the battery/power supply. BUT

  -When I pull the battery in my 4030CDT, all right, with the same power supply.
  -J' also tried with other HARD drives and without, same result
  -replace ram 4030CDT work and only with 64 MB onboard, same result
  -deconnecting floppy drive (where the click seems to come), same result

  If it is possible to provide me with assistance, it is already 3 months that I'm looking to solve the problem. My 4030CDT had the same thing a time ago, but now works fine, I did nothing about it. But I lose hope that to happen...

  Neither this fact, it is the fourth toshiba that I work with, and it is a pleasure to work with these laptops robust and stable. I advise them to everyone and hope that someone can find a solution to my problem. If I can keep going using my computer laptop nice oldskool.

  Cheerz,

  Benoit of Belgium

  Hello

  On this path, it is really not easy to give any concrete explanation. It is possible that this click comes from FDD. When the FDD is set as first boot device it is logical that the FDD want start and check if the disk is inside. Otherwise, it is just a click away and tries to boot from a device set following.

  Please carefully check the power LED and do not forget, if the LED gives a flashing code (intervals short and long turn signals). If so, there is a serious problem of electronic and technicians, you must visit.

  What is with power LED? Is there a any reaction?

• Applications created with the Application generator does not start. It was after that I allowed the update install patches. Now the Version is 12.0.1f3 (32 bit)

  Help! Do not know what happened... I left the patch install the updater f3.  Now, when I create an application, it appears on the task bar (Windows 7) for a few seconds, then goes.  I don't know where to begin to understand this.

  Thank you

  Rich

  It is on the same computer.  The PC has the standard COMPUTER stuff.  VIper and they handle most of the firewall settings (windows).  I have turned them all off before installing.  I think it was a matter of execution engine.  I have no time to fight with LabView, so I uninstalled all LabView!  Then I made a new installation of the DVD.  This works.  I never install a patch of NOR without a week of free time!  In others, ever!  Whenever I do it, it takes me at least a day to get my operating environment!  Thanks for your time.  It is appreciated.

  Best regards

  Rich

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• Windows 8 OS invited on host windows 7 with VMWARE 9.01 does not start

  Then Windows 7 host has a processor Quad-Core AMD Athlon (TM) 9600B with 8 GB

  I tried to install windows 8 64-bit and 32-bit windows 8 and also upgrade an OS called windows 7 to 64-bit.
  I becam a black screen:
  Your PC needs to restart.
  Please hold...
  Error code: 0x000000A-> by the 32-bit guest operating system
  ...

  Error code: 0x00000C4-> by the operating system called 64-bit

  What's wrong?

  Try to set

  Data Execution Prevention
  * Disable
  Enable

  to "Enable". After you change this setting, you will need to power cycle the system.

  André

• Managing servers with virtual IPs / hostnames does not start

  Hi all
  
  I installed a cluster of OSB in load balancing and a load-balanced SOA (10.3.6) on two separate servers.
  
  -Server Admin SOA (runs on the server #1).
  -Server Admin OSB (runs on the server #2)
  
  I am using virtual hostnames for my managed servers of SOA and OSB, as follows:
  
  -Server of OSB managed #1: OSBHOST1VHN - ip: xxx.xxx.xxx.xxx (runs on the server #1)
  -Server of OSB managed #2: OSBHOST2VHN - ip: .yyy (runs on the server #2)
  
  -Server SOA managed #1: SOAHOST1VHN - ip: www.www.www.www (runs on the server #1)
  -Server SOA managed #2: SOAHOST2VHN - ip: zzz.zzz.zzz.zzz (runs on the server #2)
  
  -The BAM server managed #1: BAMHOST1VHN - ip: nnn.nnn.nnn.nnn (runs on the server #1)
  -The BAM server managed #2: ip: zzz.zzz.zzz.zzz - no name virtual IP here (runs on the server #2)
  
  I was able to start/stop the admin server managed nodes on each server so far Manager.
  Everything works great until we decided to stop the machines to add more memory.
  After the reboot, the servers admin started but not servers managed.
  Well, all the managed servers with vIPs failed, but the BAM #2 server started without any problems.
  
  For other servers managed, I get the following errors in the log files.
  
  # < 20 nov. 2012 15: 56 GMT > < error > < statistical ALSB Manager > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 9583013bf964d764:32a0a378:13b1e86ef73 :-8000-0000000000000010 > < 1353426960019 > < BEA-473003 > < server of ' Agra delegation not available. Cannot get the aggregator distance
  java.rmi.UnknownHostException: could not find URL for the server 'ms_prd_osb1 '.
  at weblogic.protocol.URLManager.findURL(URLManager.java:145)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:120)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:76)
  at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$ 000 (ALSBStatisticsManager.java:38)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager$ RemoteAggregatorProxy.send (ALSBStatisticsManager.java:55)
  at com.bea.wli.monitoring.statistics.collection.Collector.sendRawSnaphotToAggregator(Collector.java:284)
  at com.bea.wli.monitoring.statistics.collection.Collector.doCheckpoint(Collector.java:243)
  to com.bea.wli.monitoring.statistics.collection.Collector$ CheckpointThread.doWork (Collector.java:68)
  at com.bea.wli.monitoring.utils.Schedulable.timerExpired(Schedulable.java:68)
  to com.bea.wli.timer.ClusterTimerImpl$ InternalTimerListener.timerExpired (ClusterTimerImpl.java:254)
  at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:531)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  # < 20 nov. 2012 15: 56 GMT > < emergency > < security > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000015 > < 1353426963376 > < BEA-090087 > < bind to the configured Admin port the server failed. The port may already be in use by another process. >
  # < 20 nov. 2012 15: 56 GMT > < error > < Server > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < DynamicListenThread [Default] > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000016 > < 1353426963376 > < BEA-002606 > * < cannot create a server socket to listen on the channel "Default". The 172.17.241.93 address may be incorrect, or another process is using port 7000: exception java.net.BindException: cannot assign requested address. > # < 20 nov. 2012 15: 56 GMT > < critical > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963377 > < BEA-000362 > < server failed. Reason: The server doesn't have to bind to any port can be used. See the log for details message. > # < 20 nov. 2012 15: 56 GMT > < error > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963387 > < BEA-000383 > < is not an essential service. The server will shut down >
  
  I tried to ping my vHOSTS:

  ping OSBHOST2VHN

  I managed to fix my VIP, so I guess they work properly.
  I checked the etc/hosts, and everything is set up correctly.
  I also checked config.xml (which I have not modified) and everything seems correctly (host, servers, IP, ports,...).
  
  The only one that has changed since the rebooted server is the setDomainEnv.sh in which I modified Xms and Xms values to increase the heap size.
  I only changed it on a single server to check if the settings we correctly applied.
  
  Can someone help me with this?
  
  Edited by: user13619168 Nov. 21. 2012 08:09
  
  Edited by: user13619168 Nov. 21. 2012 08:10
  
  Edited by: user13619168 Nov. 21. 2012 08:16
  
  Edited by: user13619168 Nov. 21. 2012 08:17

  seems you use duplicate port numbers, would you please change the port and make sure that it is not in use by any other process. hope this will help.

  -Negi Mukesh
  http://weblogicserveradministration.blogspot.in

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• Re: Satellite A200 does not start

  I have a Toshiba Satellite A200 on VISTA.
  The laptop does not start. I can get to the Toshiba splash screen, but don't go no more far just get the blocking of the laptop and the display one? symbol at the top right of the screen.

  I tried

  -Reset to the factory settings (no difference)
  -Starting with the battery and output (no difference)
  -Withdrawal of the memory modules and try different configurations (no difference)
  -Remove the hard drive (screen displays the details of Intel and say no HD media detected no screen Toshiba either)
  -Pressing the button to try to get in windows safe mode (can t happen).

  Title information, under settings, I see the hard drive and DVD player is connected is connected.

  If anyone has any ideas, please let me know.

  Thanks in advance

  Hi mate

  It seems that you have already tried all possible solution proposals
  But what happens if you start the laptop using a bootable diskette. for example, recovery disk, disk Win XP, Linux live CD, etc?

  I knew it could be a HARD drive problem, even if the HARD drive is correctly detected by the BIOS
  Maybe a replacement HARD drive might help maybe.

  Otherwise, it could be a serious hardware problem I m thinking: motherboard

  What do you think?

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!