Satellite A40: Question on TV channels and satellite

Similar Questions

• Satellite A40-121: how to open and replace the cooling module

  Hi all

  I have a Toshiba Satellite A40-121 for 4 years and was very happy with his performance so far. Just recently, one of the fans is undeliverable noisy and very quickly becomes very hot, so I think I have to change. (I'm not a computer technician, but I live somewhere in the middle of nowhere in China, no support available at all...).

  I opened my laptop, but now the covering is always fixed somewhere in the Middle, no screws left!

  Do you need some pictures or even a manual how to open my laptop? I could send the vehicle damaged to friends in Germany and they would try to get a new...

  Thanks a lot for your help!

  Best
  MKD

  As far as I know that two lovers coling are fixed by two screws. When you remove the two of them, you should be able to remove the cooling fans. Put simply irrelevant.

• Find channels and cDAQ modules

  I have looked around the previous messages, but can't seem to find what I'm looking for.

  In most of my experience, I've implemented some DAQ and once the modules and channels are all in place, which is where they stay forever.

  Since I know things will not move, I create tasks in DAQmx.

  I'm working currently on a new installation program, but the problem is that in things cDAQ will not be in the same place every time.

  The application must read a number of strain gauges, which will be connected to the NI 9235 modules.

  It will take place anywhere from 1 to 3 modules attached, and they can be in one of the 8 available cDAQ chassis slots 9172.

  In addition, within a given module, anywhere from 1 to 8 channels will be connected.

  So basically, I guess my questions are running:

  (1) how many modules are connected and where?

  (2) in each module, the number of channels is turned on and how much is empty.

  From there on, I use DAQmx palette to take care of things.

  Thank you!

  So with every new start of the program, you will have a known device (your strain gauge device), but unknown channels. Here's how I attacked only a few years ago...

  • DAQmx create a task to create a job.
  
  
  • Make a constant table of all known possible channels. Say that it is 8 cells and compare that to an array of channels USED, making false tracks off the chains 'Unused' and the names of real channel out of used ones. Under certain conditions to check which ones which is used to remove the appropriate channel and add the DAQmx virtual channels properly. The VI snapshot below goes into the details. I brought not only the channels, channels, such as min/max properties and bridge information. My VI also made bridge removal, under certain conditions, depending on sensor that the user wanted to null (that part is not shown.)

  This code isn't super sleek, but I hope this gives you the ideas come from.

  

• I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

• Looking through channels and create a chain of search values

  Hello

  I am trying to generate a script that allow me to serch throug a channel and compare the values of a number and create another channel with these instances

  Let me expand

  I have the following test data in a PDM file with a name of group 'Monthly data' and a channel name of "month 2"»

  Time value

  1 18000

  2 45100

  3 59800

  4 35500

  What I want to do is to compare these values to a set of values and record when this value occurred in a channel.

  For eample I am looking for all values greater than 36000 and 50000

  So I would end up with a new channel that would containm the following text

  2 45100

  3 59800

  I know I need to create a table of values that would take the data comparison

  CtrlVals = Array ("", 45000-50000)

  and a channel to store the found values and assign a default value

  IF GroupIndexGet ("stored value") > 0 THEN

  groupIndex = GroupIndexGet ("stored value")

  GroupDel (groupIndex)

  END IF

  Call Autonomecreer ("stored value")

  groupIndex = GroupIndexGet ("stored value")

  CallGroupDefaultSet (GroupIndex)

  And I have to create the channel in that I want to store the data

  ChArray = ChnAlloc ("Instances", iMax): ChnLength (ChArray (0)) = iMax: CtrlEdgeChX = ChArray (0)

  I guess I'm not sure how to insert data found in the created channel.

  I use DIAdem 2011

  Hello SmoothDurban,

  The variable you are looking for is (it would be for the channel of 'Time' in Group 1...

  Data.Root.ChannelGroups (1). Channels ("Time"). Properties ("length"). Value

  You can find the name of a property in DIAdem by dragging in the DataPortal script editor.

  

  In the above example I have simple glide the maximum property from the data portal to the Panel SCRIPT, the end resulty is the full name of the property with channel and group of references...

  Hope that helps,

  Otmar

• sample per channel and read sample

  Hello everyone

  I'm new in LABVIEW and I have some difficulties with something.

  I put t know exactly what is the difference between the sample by channel and the sample to read. According to me, knowing that the sample by channel is the size of the buffer that is larger than the sampling frequency, but I put t know what is the sample to read.

  I ve tested with different sample per channel and read. Sometimes I get an error and sometimes know and I would like to know why. If you have examples because I understand better, it will be great.

  I really need to understand this part of my project

  Thanks for your help

  Tony GIBERT

  Hi Roro,

  As you mentioned, when the size of the buffer absorbing continuous samples, you can specify the sample by placing a value to the entry "samples per channel" on schedule vi. The entry of 'number of samples per channel' on reading vi which automatically names a control / constant with 'samples to read' specifies the number of samples you want to remove from the buffer in an appointment during playback of several samples (N). This link may provide a little more detail. I am also attaching a good example of the finder OR example that you may find useful to explore. I assume you are using the DAQmx driver put then please let me know if this isn't the case, but the same principles should apply in any event.

  This means accordingly for sampling at a given rate, you must make sure you're pulling data in large enough 'chunks' so that the buffer overflows (which may well be the cause of error that you see). On the other hand if your sampling rate is slow and your reading vi is having to wait the number of samples to read you have specified to be available, he can lift a time-out error. You can avoid this by increase your sampling rate, reduce your samples to play or increase the time-out specified read vi entry (-1 means it will wait indefinitely).

  Let me know if this helps and how you will.

  All the best.

• Question about Powerconnect M6220 and out-of-band/management 8024-K connection

  I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here.

  My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for example port 18 for example) or through connection of the M1000e CMC?

  The reason for this question. We recently vlaned our network and CMC modules are VLAN 8 (10.100.8.0 255.255.248.0) and management of our switches is supposed to be on the VLAN 1 (10.100.1.0 255.255.255.0). I can't ping on the affected IPS (IE 10.100.1.15), but our CMC modules are fully accessible (IE10.100.9.120). Our blades are fully accessible and can access all the VLANS on them (they are the ESX host).

  Finally, I'm sorry if all necessary information has been provided, I'm not so much a networking guru.

  Thoughts?

  Thanks for your help

  The OOB interface is connected to the chassis management controller by the median plane of the chassis. Traffic on this

  port is separated from network traffic operating on the switch ports and cannot be lit or routed to the operational network.

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements.  I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to foru

  I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements. Yes, I was wrong. I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to forums, but I'm lost.  8-)

  I searched "4 years PS E7 developing problems...» "and couldn't find even in Discussions and notifications that it has been moved.  I would have thought that a search would have led me on the Forum of items with notes as to how much, if any, had read it.  This is what I'm used to.  As I said, I'm lost.  Sorry if it should be obvious, and if I look like a whiner.

  Viewerx wrote:

  Oh, so it has been moved, but still listed in the Discussions?  You could say that.

  When a thread is moved, it will also appear in its place of origin for a short period in order to allow the original poster to find.

  I didn't know where it was posted.  I'm not a moderator and couldn't have moved it.  Only, I went to your profile and watched your activity:

  

• Can I make video tutorails on Adobe creative cloud apps for my youtube channel and website and monetize it

  Can I make video tutorails on Adobe creative cloud applications like photoshop, after effects, first for my youtube channel and website and monetize it

  Here is the official information, if you want to read the details, licenses and terms of use | Adobe

• I have a question? credit card and paypal are the only way to pay?

  I have a question? credit card and paypal are the only way to pay?

  Yes, the command line options are

  Adobe store	Supported countries	Payment options
  North America	To the United States, Puerto Rico, Guam, other U.S. territories, Mexico, and Canada	MasterCard, Visa, American Express PayPal for purchases of software, book, support and fonts. (You can not use PayPal to purchase subscriptions).

  You can buy retailers such as staples, amazon the redemption code or key card subscription. You'll have the linerty to choose the method of payment then.

  Concerning

  Baudier

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• The selected file cannot be linked because there 6 audio channels, and the clip was created with 2

  I tried to link the MTS files to a project that I have edited with AVI files. I got the message "the selected file cannot be bound because it has 6 audio channels and clip was created with channel 2/channel" audio. Does anyone know what I need to do?

  I had this problem and the cause in my case, it was that I changed all my clips in the project are mono audio channels. When I tried to swap the originals with proxies, I did, I had a similar message for the clips that have been affected by the designation of channels. I opened the project and selected all my media items in the project window and changed all the audio back to 'use the file' and that did the trick for me.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.