Error "Windows failed to load, status: 0xc000014c" when starting.

Similar Questions

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• "windows failed to load because that layer HAL is missing or corrupted"

  my laptop wont even start in safe mode because of "windows failed to load because the HAL is missing or corrupt" I don't have my software for my laptop. Help

  before that, I had problems to my laptop with windows startup, it worked in safe mode.

  Hello

  • What operation are you using?

  I suggest you follow the below methods that can help you resolve you issue.

  Method 1:

  Boot into the recovery console. Run "chkdsk/p". to check for errors. If errors are found, then run "chkdsk/r". Do follow link below:

  http://support.Microsoft.com/kb/315265

  Reboot to see if the problem is resolved.

  Method 2:

  • Boot into the recovery console.
  • Run "bootcfg /rebuild.
  • You will receive a message similar to the following:
    Total identified Windows installs: 1
    [1] C:\Windows
    Add installation to boot list? (Yes, no, all)
    Press on "y" then "enter".
    When "Enter load identifier" appears, type the name of the operating system (this name is arbitrary and it is just a label for the found installation) and press "Enter."

  4. when the "Enter OS Load Options" appears type "/ fastdetect" and press "Enter."

  5. close the recovery console to see if the problem is resolved

  Refer to this link: http://support.microsoft.com/kb/314058

• Satellite A500-15N "windows failed to load.

  I turned on my laptop today and started the usual startup process.
  Toshiba - logo (press F2, F12)
  -Green windows loading bar

  Then the laptop displays a black screen and nothing happens.
  When I turned off the laptop and turn it on again I get a message saying "windows failed to load" then it gives me options to run windows normally or run restore windows.
  Restorations of Windows does not work when I try to run it.

  This already happened to me, and I had to use my backup restore CD to restore the laptop to originial. I want to try to solve the problem for good, if possible, though.

  I don't want to have to restore the phone whenever that happens and risk losing data.

  The laptop works fine when it is plugged in at all times.
  Twice now, happened when the laptop has been disconnected from the mains and the battery is running out of power.

  Any help would be greatly appreciated.

  You can start Windows in safe mode?
  If yes try to roll back OS to an earlier time using System Restore tool.

  You have to understand that we don't know what are you doing with your laptop and what may be due to such behavior.

• Run-time error '372': failed to load control 'ctlRowInput' while trying to run "Nexus 2.0."

  Title: Runtime error ' 372': failed to load control 'ctlRowInput' of.  Your version is perhaps obsolete.  Make sure you use the version of the control that was provided with the application.

  I tried to download an updated version of the fire behavior prediction software, "Nexus 2.0."  The program downloaded straight, but the software does not work.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest you to uninstall and reinstall the program in clean boot mode, and check if the problem persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  Method 2: I suggest you to contact Nexus support for assistance.
  http://www.fire.org/index.php?option=com_frontpage&Itemid=1
   
  Hope this information helps.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Essbase Error Error: 1002097 failed to load the database

  Hello
  I use essbase 7.1. I'm having a problem when I try to run any calc start application or database or do anything Essbase gives me an error: 1002097 failed to load the database. I restart the services, essbase, but nothing happens. Any help would be great.
  
  Thank you

  Browse the backup and restoration guide that is located at http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm. While he is a guide of the system 9, recovery has not changed between 7 and 9. I guess it all depends on what type of backup you did.

• Windows fails to load, the loading screen bar after installed KB2479628 _

  Windows fails to load once installed KB2479628, my Dell BIOS boots then the loading loading bar continuously scrolls. After now the power button for 5 seconds and re-start the computer, Startup Repair tries to run and need to use system restore to properly initialize.

  I uninstalled the update and disabled for windows updates won't install the update on its own.

  • Never had a failure of the before update.
  • running a dell inspiron e1705
  • V8.0.6 IE / Win Vista SP2a

  Research on the update, it seems that KB2479628 is very important. Is there a reason that my system is not compatible with it?

  [1] [of Spybot's Tea Timer is] Enabled

  [2] I was running AVG previos version and previous version of Comodo until the current version of Comodo conflicted with AVG...

  A1. Please disable the Tea Timer of Spybot and leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  A2. Comodo Internet Security includes an antivirus application. You should NOT have more than one 1 installed anti-virus application & loading at startup. You tell me that you used to have Comodo Internet Security (antivirus, antispyware, firewall) AND AVG Free anti-virus installed at the same time?

  PS: Let us a favor & edit your first post above: replace KB2479268 KB2479628typos. Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows failed to load because hal is missing or damaged

  I can't start my computer because its telling me that windows could not load because hal is missing or damaged. I tried to fix it by installing the cd to repair, but I can't restart the computer. I tried to choose different options in the menu of options advaced bood, but he always tells me the same message "windows failed to load because hal is missing or damaged. Help do not know what else to do!

  Hi Dimples328,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2: I suggest you try the steps from the link below and check if it helps.

   

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Let us know if that helps.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie