Satellite A500 - how to connect to the TV?

Similar Questions

• Satellite A500 - unable to connect to the WLan

  I'd like someone to help me.

  Have recently bought a satellite A500.
  I'm new in the world of laptops so I'm wrong.
  I connected to a router via a modem, the two netgear, the news.

  Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

  My wireless icon on the front of the laptop is orange.
  If this should be green as the router?

  Pressing FN f8 it tell me wireless is connected.
  When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
  But I want to go wireless, I'm sure I'm missing something.

  Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
  I use windows7.

  Thanks to anyone who can help me.

  > My wireless icon on the front of the laptop is orange.
  > Should it be green as the router?

  The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

  It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
  You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

  First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
  Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

  Please check if the firewall does not affect the connection to the internet as well!

  PS: make sure you use the latest version of the WLan driver
  Here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, search and read comments here on the forum!

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• Satellite A500 - how to register on the site Web of Toshiba?

  Hi, guys

  A week ago, I bought Toshiba satellite A500-1dn, while trying to register it here http://uk.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  It is for me, serial number not valid, then I tried to use, auto detect this system - but always the same result - your product not supported,

  your suggestions, please

  Hello

  You want to register your laptop to get an extended warranty?

  In any case, in the first instance, you must register your laptop on the Toshiba page.
  http://EU.computers.Toshiba-Europe.com > support & downloads > Warranty & Service registration

  After that, you can buy an extended warranty here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > Service offering

  In my case, it worked then visit the page again. I think that you have used the wrong link.

• Satellite A30: How to connect to the tv?

  If someone can help me:
  I want to connect my laptop to TV (satellite a30), but when I get home display-> settings-> Advanced-> button toggle poster seem to be grey and I can't activate.
  Please tell me what to do.

  Hello

  Have you checked the ability to move with the FN + F5 key combination?
  Please try it out.

  Good bye

• Satellite C650D - how to connect to the TV?

  Hi, I'm trying to connect my new laptop to tv, but only one port is vga (no vga on tv input). Tried to buy a vga adapter tv (RCA), but still does not connect.

  Is this possible to do?

  Hey,.

  This means that there is no picture on the TV?

  Well, try to use the FN + F5 key combination to switch between monitors.

• Satellite L300D - how to connect to the WLan?

  I'm not very good with this stuff.

  I bought this laptop yesterday with Vista & went about it today, but when I went off the wireless switch to, he went to orange, meaning wireless is disabled?
  And when I click 'connect to' no networks wouldn't come.

  I don't know what to do...

  Move the WLAN to turn it on position and use the key combination FN + F8 to activate the wireless network card. The WLAN led will be (light orange). So now is the WLAN card turned on and you can try to search for wireless networks in your area.

• Re: Satellite A500 - how to recover data from sandisk

  Hello

  I HAVE A LAPTOP SATELLITE A500.
  EVERYTHING NEW IN THE LAPTOP WORLD AND DISAPPOINTED THAT MY COMPUTER OLD SIX MONTHS MUST HAVE HARD DRIVE REPAIR.

  MY QUESTION IS:
  I HAD TO RECORD SOME PROGRAMS SUCH AS MY I TUNES LIBRARY AND SON GAMES ETC ON MY SANDISK.
  I HAVE NOW PUT THE DATA IN A FOLDER IN MY DOCUMENTS, BUT CANNOT WORK OUT HOW TO RELOAD THESE PROGRAMS IN THE FOLDER.

  ANY HELP WOULD BE GREAT.

  Thank you

  Hello

  I guess that you have copied the unique demands that have been placed in the C:\Programs Files folder on the SD card. Is this good?

  Well, usually it of not possible to copy these programs again, and then to start
  The point is that this will not work because these programs must be installed first on the HARD drive.

  You can copy only a few files to stand alone as file mp3, movies, photos, data files, but you cannot copy (copy and past) software

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Satellite A500 - how to reinstall the original Windows 7?

  Hello

  I bought the Toshiba Satellite A500-19U and Windows 7. I tried to create a new partition, then I've done assets so he hid, after restarting the laptop, I had a black screen and massage (bootmgr is missing)

  So I installed another copy of Windows 7 just to connect to my computer. Then after the copy of Windows 7 installation I made inactive D if it appeared there is file recovery. So my question is: as long as I have this file I want to reinstall the original Windows 7 I have in the drive hard, but how?

  When I press F and repair, then it does not give the last option of HARD drive recovery! Why and I have the recovery file?

  Please help me

  Hello

  I guess you didn't read the manual user, first of all. I m right? ;)

  Well, normally HARD drive recovery you can start if you go into the advanced boot menu (F8) and select Repair my computer. After that, you can choose the option of HARD drive recovery.

  But I guess that this isn't possible anymore because you have installed another copy of Windows 7. If this menu isn't available anymore.

  The only option to restore factory settings using the Toshiba recovery disc. Did you create it? This can be through with preinstalled creative drive recovery Toshiba but if you didn t create it, it s too late now, too.

  The only option now is to order a new drive Toshiba Recovery directly. So take a look in your user manual.