Satellite C650D - how to connect to the TV?

Similar Questions

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• Satellite A500 - how to connect to the TV?

  I would like to connect my Satellite A500-134 to a CRT TV. The output ports are D - SUB and HDMI. Ports of entry on my TV are RCA and SCART.
  Is it possible to watch movies on the TV?

  Thanks for your reply.

  Hello!

  If you want to connect this laptop to a TV, then use an adapter, e. g. D - SUB to RCA.
  Here's a picture I want to say: [D - SUB to RCA | http://www.gainbery.com/Product/Adaptor/vga%20to%20rca.jpg]

  On my Satellite L300 I use such a D - SUB to RCA adapter and it works without any problem. I am very satisfied with this solution.

• Satellite A30: How to connect to the tv?

  If someone can help me:
  I want to connect my laptop to TV (satellite a30), but when I get home display-> settings-> Advanced-> button toggle poster seem to be grey and I can't activate.
  Please tell me what to do.

  Hello

  Have you checked the ability to move with the FN + F5 key combination?
  Please try it out.

  Good bye

• Satellite L300D - how to connect to the WLan?

  I'm not very good with this stuff.

  I bought this laptop yesterday with Vista & went about it today, but when I went off the wireless switch to, he went to orange, meaning wireless is disabled?
  And when I click 'connect to' no networks wouldn't come.

  I don't know what to do...

  Move the WLAN to turn it on position and use the key combination FN + F8 to activate the wireless network card. The WLAN led will be (light orange). So now is the WLAN card turned on and you can try to search for wireless networks in your area.

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Satellite P15: How to connect the TV antenna?

  I bought Toshiba Satellite P15 S479with XP MCE, with tips and Tv tuner, and I do not know how to connect my Tv antenna, so I could watch and record tv on my computer. My picture quality is poor, I see tones with lots of "snow".
  What should I do?

  Hello
  As far as I know it must be an American model. Do you use it in the United States or Europe? If you use in Europe is another TV standard (PAL).

• Satellite C650D - how the BIOS boot CD?

  Hello

  I'm trying to make a disc bootable image to update the BIOS for the model Satellite C650D (PSC16A-02U011).

  Can someone point me in the right direction? I found the download area of the driver for this model, but the update to the BIOS it is only an exe file and my laptop has no operating system on it at the moment.

  If I try to load the system hard disk and then use the exe it gives me all sorts of problems so I m try to Flash the BIOS from a CD while the hard drive is out.

  Then after that I updated the BIOS I have reinstall everything.

  Thank you

  {quote} I m try to Flash the BIOS from a CD while the hard drive is out. {quote}

  I m wondering why you n t replace the HDD and install Win 7 first.
  Then you could update the BIOS (if necessary)

• Satellite L500 - how to set up the WIFI connection?

  I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...

  After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...

  Can someone throw some light/provide any assistance! I'm getting desperate :(

  Thanks - my email is [email protected]

  Hey nic,.

  You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.

  First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
  Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
  Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management.

• Satellite Pro M70: How to connect to the internet using a second computer

  I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

  My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

  He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

  I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

  If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

  The virus could have damaged the Ethernet controller, or she affected somehow?

  Is it possible to test?

  Have you advice?

  Hello

  The virus was detected on the laptop you so maybe your PC has also been affected.
  Did you check if the laptop and the PC using the same workgroup?

  XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

  Maybe it helps