Satellite A60-672. to access the drive D: problem

Similar Questions

• Satellite A60 do not mount the drive UJDA760

  My Satellite A60 CD-ROM/DVD-ROM drive has stopped working properly. He is more able to read DVD - ROM, a serious problem because the recovery disc is a DVD-ROM.

  I recently bought a replacement drive, the same model as the old disk number. But when I installed it, the computer does not recognize the drive. The drive has power and running disks. The computer does not know it is there.

  Someone has an idea of what can be done to encourage the player from the computer? I updated the BIOS to the latest version, but that did not help.

  I appreciate any suggestions.
  Phil premium

  Hi Phil premium,

  The old drive is recognized correctly in the BIOS?

  I'm not sure but some readers have a rider on the back where the connector is. There you can switch between Master, Slave and Cable Select. Please put the jumper on Master and if it s does not, try the slave mode.

  In the worst cases, the new drive is defective and you must return it to the store and ask for a replacement.

• Satellite A60-672: Question on the memory expansion

  Hi, apologies for this new! I would like to increase the memory of my Satellite A60-672, where I can find what I need (including the number) etc.

  Hello

  Your device can handle with max 1280MB. The compatible modules are:

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Satellite M70: Can't access the CD drive during the use of CDs & DVDs blank

  My satellite M70 gives me the following message is displayed when I insert the blank disc for recording.
  D:\ is not accessible
  Incorrect function

  I am however able to access the drive to view already recorded CDs and DVDs. I used similar CD and DVD for burning purposes earlier. What could be the reason?

  Hello

  According to the Microsoft Knowledge base document this problem may occur if the registration of CD from Roxio Easy CD Creator program is installed on the computer, and the version of the CD recording program is not compatible with Windows XP.

  Please check this document how to solve:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

• Problems with map graphics on my Satellite A60-672

  I have a Satellite A60-672 which graphics by ATI. Repeatedly at startup until it broke down and the system crash online said whenever it is ATI technologies. I sent ATI and they said that there is nothing to do with them.

  I tried Toshiba, but none of the work address by e-mail. The crash system tells me to uninstall the software, but given that I put on, I mistrust all this as it may ruin the functioning of my laptop.

  Currently, my laptop works very well with this ongoing problem. This happened to someone else or we know how to contact toshiba.

  Thank you

  Sounds like a driver problem, you just need to download the Toshiba display driver, uninstall your old ATI driver with the ATI Control Panel, restart and reinstall again.
  don't worry this will cause anything on your laptop in addition to repairing damaged files that crash. It is a simple operation.

• Do not write satellite A60-672 DVD-R/RW

  Hello

  can someone help me I just receive a satellite A60-672 when I try to write a dvd that he will not write one that I tried an audio drive, he writes very well on that told me that he will write on DVDs, the writer is a pioneer dvd - rw hard-k13a im new on all this hope you can help thank you

  Hello

  What burning software do you use? I use Nero software to burn and there is option where you can choose on which way must be written (CD or DVD). Please check is somewhere on the software that you are using the same option.

  Also, you should contact the seller a DVD Writer what the writer can write? Or you look at the homepage!

  Good bye

  [Edited by: admin]

• Satellite A60E-672: do I need to new OS after new motherboard replacement?

  Hello

  I was wondering if anyone can tell me if I need to buy a new copy of Windows XP, if I change the motherboard?

  I guess the laptop will be version Toshiba OEM XP and XP security then considered a different laptop and prevent the operation!

  Also where can I get a new card mother (and at what price) for a Satellite A60E-672 valves. V000040780?

  I'm trying just any price on fixing or stripping options and sell as bits!

  Thanks Jon.

  Hello

  > I was wondering if anyone can tell me if I need to buy a new copy of Windows XP, if I change the motherboard?

  If you want to use the same card, you can use the CD recovery with no problems.

  But if you replace the table with different that you will need to buy an original Windows OS. To my eyes the Toshiba Recovery CD will not work.
  Why? Because the image on the restore CD contains all Toshiba tools, drivers, and utilities and this preinstalled different application like utility chipset, graphics driver, etc. could not be compatible with the new motherboard and possibly you will not be able to install the recovery CD.

  > where can I get a new card of mother
  You can order the new Board of Directors of the ASP in your country or you will check the Ebay for a part of second hand

• Satellite A60 crashes and restart the cycle - missing or damaged system32\DRIVERS\Ntfs

  I have a Toshiba Satellite A60, who has recently developed a serious problem and is currently blocked in a crash restart cycle. He started with the message "missing or damaged system32\DRIVERS\Ntfs", I've read about this problem on discussion forums, but am still unable to find a solution.

  Currently on start error messages appear indicating a driver is missing or damaged, the Toshiba start page has vertical lines of missing data and on a few occasions it will fully start after a short period of time vertical lines appear on the screen and it crashes.

  I tried a number of bugs:
  * Re installed windows XP pro (formatting the hard drive and renew the partitions)
  * Update the bios on the site of toshiba in version 1.90 (I think that the update also flashes the bios, but would need this confirmation?)
  Swapping the hard drive with a portable, yet no longer starts and HD works fine in another laptop, dismissing the possibility of missing or corrupt files.

  I realize that this could be a problem with the RAM and think that the laptop has 512 fixed to the motherboard, accessable without stripping down, but do not know how to determine if the RAM is the problem. While trying these fixes, I get problems with the start of the player and can only get the disk to launch and recognize the CD about 1 to 10 times.

  Could someone suggest a remedy or a fix I can try? or suggest how they fixed a similar problem. Thank you very much

  You ssounds not very good ;(description
  The hardware malfunction appears to be responsible for the vertical lines on the screen
  If vertical lines appear also an external display, the jury may be wrong.

  You re right, I Googled, and it seems that Sat A60 supports an internal memory.
  As far as I know, this memory cannot be removed and only an electronics could solve this internal memory.
  But are you sure that the internal memory is impaired. The device supports only 256 MB internal memory and other modules are removable
  If you can try to replace

• Cannot access the drives on my pc through my computer vista laptop windows 7

  I'm trying to network my vista pc and my laptop win 7.  See the vista pc and have access to all files and drives on my laptop win 7.  But my laptop win 7 can't access the drives (I have 2) on my vista pc.  The win 7 see the vista on my network pc.  I can access the vista computer, I can see readers, but access is denied to 'no permission, contact your administrator. "  The public record access very well, but not the 'c' and 'n' readers.  "N" is an extra internal drive, which I added.

  I double checked that the readers are shared, said permission to everyone, even turn off the password just in case.

  I have read another view and tried everything that seems near, please help.

  I am also able to connect to my vista through Windows Media Player media files.  Just not able to access my files in the readers.

  In Vista, go to start / network / network and sharing Center and make sure network sharing, file sharing, sharing protected by password and share multimedia files are all checked.

  If this isn't the problem, please repost your question in the Forums of Windows7 (that you are able to access Vista and not of Windows7 is a Windows7 problem - although it probably involves some changes in Vista as well) to: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where people who specialize in issues of Windows7 will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• cannot access the drive of bitlocked after reinstalling windows

  Hey guys!

  I had locked a drive using bitlocker. I reinstalled my windows! now, I can't access the drive (I didn't turn off bitlocker or suspended.)

  When I click on the drive it says you have to format it! and when I click on format it says is impossible to format!

  I have 40 GB of data that I can't lose!

  pliz help me!

  You need a certificate to access a bitlocked drive.

  BitLocker Repair tool to recover a disk

  http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/19f28028-EACE-4878-b5e5-8cd78c19f6f3
  If that fails, then you have to recover your files from your external backup media.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• Satellite A60-672: where to find a display driver?

  Hi all

  can't seem to find the drivers to display for the Satellite SA60-672 (model No. PSA60E - 02Z02P7Y), it's an ATI mobility Radeon 7000, but all the drivers I downloaded do not work, anyone know where I can get the drivers from?

  Kind regards
  uk_rules_ok

  Hello

  Have you checked the page of the Toshiba driver?
  Here, you can choose the Satellite A60 and you will find the display driver.
  It s an ATI and it should work properly.

  Please note: you must use the display of the Web site form driver and note of Toshiba, the graphics card manufacturing site!

• Satellite Pro A60: How to replace the drive?

  Satellite Pro A60 replace DVD player - need repair
  Or does anyone know how to remove the drive of this laptop Bay

  Post edited by: chrielli

  Hello

  I think the disk replacement procedure is very similar to replacements on other laptops.
  To remove the STRANGE bay module follow these steps:

  1. turn the computer.
  2. remove the black binding screws.
  3 turn the computer over and open the display.
  4. push the module bay ODD.

  All that s. It s not achieved with a screw.

• How to format Satellite A60 302 without using the CD/DVD drive

  Hello

  I have a laptop SATELLITE A60-302, and I had a problem with cd player. I want to format the computer (WIN XP) and I wanned to ask if I can format the computer not by the cd player but another way as disk on key or something...

  Thanks :)

  Hello
  Your best bet might be trying to use an external CD/DVD drive to install Windows XP (must confirm that your laptop can boot from USB CD/DVD). I would not recommend it otherwise because they are pretty complicated and you will encounter other issues.

  Concerning
  Ben