Satellite A660-1FM - maximum resolution of the display of the external monitor

Similar Questions

• Maximum resolution of the external monitor on T500?

  I was wondering... my T500 has switchable graphics with ATI 3650. Is it possible to run an external monitor with 1920 x 1080? I am currently running a 22 "Samsung @ 1680 x 1050, but considering the upgrade of the screen on a Samsung 27".

  Advice would be appreciated. Thank you.

  You can run an external LCD to 30 inches with resolution WQXGA using the displayport.

  You can run the FHD resolution on vga or displayport.

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Impossible to get a maximum resolution of 2560 x 1600 on external monitor using DVI with Optimus video T420s

  Hello

  I have a T420s with Nvidia Optimus graphics card. I also have the ThinkPad Mini Dock Plus Series 3.

  When I tried to drive an external monitor via DVI, I can't get the full resolution of 2560 x 1600.

  I searched the forums and found several threads expressing problems with the implementation of the resolution of 2560 x 1600 per display port. Engineering even issued a new nvidia driver to solve problems. (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Unable-to-get-max-resolution-of-2560x1...

  I uninstalled my intel/nvidia drivers but also installed the latest lenovo driver according to the instructions on the previous post and I still can't get the full resolution of 2560 x 1600 on the DVI ports of the docking station. I tried two DVI ports on the docking station, and it still does not work. I tried enabling Optimus, discreet mode mode, etc... Nothing helps.

  However, if I try to drive the external monitor via the display of the docking port, I can get the complete resolution of 2560 x 1600.

  Anyone have any suggestions on how to fix this so I can use the DVI ports on the docking station?

  Thank you very much for the help!

  dvi on the dock port is single link dvi and not dual link dvi, as such, it supports WQXGA or WQHD resolution.

  In order to use the resolution WQXGA resolution, you must use the displayport, if you monitor is not a displayport then you must use an active displayport to DVI.

• Resolution of the external monitor max Intel HD Graphics 3000

  Hello

  Inspiron N5050

  Intel HD Graphics 3000

  I'll be able to drive an external monitor via HDMI to a Full HD 1080 p, 1920 x 1080 resolution?

  Hi metalstardust,

  Yes, he'll support it.

  The display resolution maximum of DisplayPort 2560 x 1600, HDMI and VGA.

  Answer please if you have any other questions.

• How to disable the Satellite A200-Ah7 screen while using the external monitor

  Is it possible to turn off the monitor on the laptop Toshiba A200-Ah7 while I use a second monitor?

  It's embarrassing to have the laptop monitor on at the same time.

  Thank you.
  Gary

  Hmm, I think that's not possible, but have you tried to press FN + F5 several times?
  Is it only a CRT monitor available?
  The monitor CRT, external display and if only that is available, then you could try to choose this.

  Otherwise, you can close the lid if you do not use the internal monitor

• Satellite Pro A120 - lines running on the external monitor refresh

  OK I just want to know if anyone else has this problem if they fixed

  I connected an external monitor to an A120 you can see the lines of refreshing the screen running, I changed the screen and power cables to make sure it is properly grounded and drove up the refresh rate all the way, but it happens still I was wondering if anyone else has the problem, so I know I'm not nuts

  (Yes, I did an upgrade driver and I tried another monitor the only thing what is the laptop but I don't want to get engineers out if it's something I can solve)

  Hello

  Can you please test it on a few different monitors? Perhaps your external monitor is not one that suits more.

• Satellite P200 - LCD is black but the external monitor is OK

  Hello

  I have a Toshiba P200 17.1 ", LCD has gone black,
  You can see the backlight in the background.
  It turns on sometimes.

  I checked with an ohmmeter lead LCD and it seems to be ok, is not sure that that is the problem.
  When I connect it to an external it follow the work ok, made his first appearance on the backlight.

  I suspect it is the LCD screen, but I would check with certainty before I part with my hard earned money.

  Question, I have a spare screen Latitude D600 14.1 ", with the same connector on the LCD (30pin)
  Could I use with inverter P200 to see if there is a signal / MoBo to the power connector.

  Thank you

  Spike

  Hello

  You must use the display 17.1.
  Your Latitude D600 screen is 14.1 "so it will not work.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Qosmio X 305-bad image on the external monitor quality

  My x 305-701 has excellent image on the original monitor, but if I connect the laptop to Acer 22 ' VGA cable I get a blurry image on the external monitor only.

  It does not matter if I use two monitors at the same time or just the Acer, the external monitor is always blurred the laptop monitor is always perfect. I tried the external monitor in 1440 x 900 and 1680 x 1050 and have adjusted the frequency of refresh of all available parameters, 59 Hz, 60 Hz and 75 Hz, and the blurred image is still there.

  I love this Qosmio and appreciate it even more on the widescreen monitor any help would be greatly appreciated.

  I know that LCD screens are blurry if set to non-native resolution. I think you need to set the correct resolution for the external monitor. Check your external display native resolution and set in display settings.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Satellite A-L50-1CU - need info on the resolution of the external display

  Hello world

  It seems an obvious questions, but... could you please tell me exactly the maximum resolution and Hz for the external monitor plugs on this model?
  I need to buy a hi res ips monitor for the edition of photography, and I don't want to pay a lot for something useless...
  Thank you very much
  Marco

  BTW, in the standard memory configuration, can I free memory locations? Or I need to remove the standard memory, substituting it with 2x8GB?

  I don't have this model of laptop, but if it has video HDMI port means that your laptop can offer excellent output video in HD quality.
  In my opinion, you should speak with your local dealer and explain the situation so I hope it can help you choose the best monitor for you. I can also imagine you can take your laptop with you and test it before you buy it.

  According to specification for portable computer, your computer can be upgraded up to 32 GB (4 memory locations).
  To upgrade RAM, you can use the memory modules to follow:
  2GB DDR3L - 1600 - PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

• Portege Z30 - A - 18 M - cannot set the native resolution on the external display

  Hello

  I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

  I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
  Thank you!

  Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
  With other words went from the desktop to the external display only computer?

  I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• better resolution on the external display

  To get the best quality image on the external monitor should I optimize for iMac or monitor? Native res monitor 1920 x 1080 and iMac is 1680 x 1050. I'm mirroring the iMac.

  Bob

  If any value for us, nor spec search what resolution your iMac will rely on a screen outside and who will give you your answer. This info is on the specification system for YOUR iMac. You will need to match that spec with the resolutions your external display supports.