Satellite A665-14F - does not

Similar Questions

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• Satellite A665-14F - IR Transmitter built-in Nvidia 3D does not

  Hey all

  I desperately need help

  I just bought a new laptop Toshiba Satellite A665-14F. the computer looks and feels well except for a big problem. Just NOT in 3D!
  I googled the topic, but no real help.

  I just opened the box, completed the installation start-up and is go to the Nvidia Control Panel to enable the stereoscopic 3D feature, it just launched the 3D Vision Assistant who asked me to choose a type of configuration to use. I took the first (with transmitter IR USB 3D glasses) and then choose. In the next screen, that it says connect the USB transmitter and press; My only problem is the A665-14f does not come with a USB external transmitter, but rather a transmitter integrated display on the right side of the Web cam so I have nothing to connect to USB, and certainly not on vision 3D button. The next button is grayed until I connect and press a
  button what I simply do not have?

  I've upgraded to the new Nvidia 270.61 driver but still and always the same. The wizard is just waiting for a USB dongle with a button and green LIGHT to go and activate the 3D Vision. After a search very thorough documentation of Toshiba they just say a very ambiguous manner that he should see the built in transmitter and the Nivida driver documentation says that it supports the built in the transmitter, in fact, I think that the driver is installed successfully for the status screen that appears after installation.

  PLEASE HELP :( I felt in love with this laptop that has everything I wanted in a laptop but missed in the 3D part. I am running Windows Home Premium 64-bit edition came with the laptop and I have not installed anything on it yet or even used. I was so excited to test the 3D and missed him so I need any hint on how to get this integrated transmitter works.

  Thank you in advance.

  Post edited by: moh777

  I think you just need to wear 3D glasses in front of the laptop for the infrared transmitter work.

  You have fully charged the glasses?

  Also download and install the latest package of nVidia Driver from the Toshiba site (not the site of nvidia). There is a new revision.

• Satellite A665-14F - can't get out SIM card more

  I tried to put a SIM card in the slot behind the battery, now I can't get out more.

  Can someone tell me how to get it out?

  Hi koalabaer,

  You have installed a SIM card in the Satellite A665-14F same the laptop doesn't have 3G card? Why have you done this? SIM card does not work with your laptop.

  Usually, you can get the SIM card if you press the SIM to extend it partially out of the computer. Grasp the card and remove it.

  Check this box!

• Satellite A665-14F - built-in Webcam suddenly stopped working

  Hello Toshiba people,

  I used Satellite A665 - 14F PSAW3E more than 2 years and I have really no problem with my webcam, until today. I realized all of a sudden (when I entered the website that requires a webcam) that my webcam is not working. (It works perfectly). My laptop stopped seeing to the integrated webcam.

  First, I checked the 'device manager' to find and check the driver of it, but I couldn't find the webcam. In fact I don't know in which category in Device Manager, I'm supposed to see. After that, I uninstalled the Webcam Application from Toshiba of the thing "Add/Remove Programs" of Windows. I found the Driver + Kit application to the webcam in my laptop Toshiba's European Web site and installed. He asked me to restart after uninstalling and installing both. I did both times. It is still not fixed. In addition, now light blue right next to the webcam (which is supposed to be activated when the webcam is active) is lit permanently, which is really annoying...

  The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '. Could be related to my problem, as if the webcam is also associated USB hardware? Cause I believe that this unknown hit-and-run driver appeared in the same day with my webcam problem.

  Thanks in advance to any person for his time. (I use win7 - 64 bit)

  Best,
  Ibrahim

  > The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '.

  I guess that's the internal webcam.
  Webcam module is connected to the USB controller on the motherboard and the yellow exclamation point means that software webcam was not installed correctly.

  In your case, I recommend first of all:
  (1) uninstall the software of webcam again
  (2) remove the unknown device Bus USB controllers in Device Manager (mark and press DELETE)
  (3) install CCLeaner tool can clean the registry and the system
  (4) restart the laptop and install the webcam software once more.

  Good luck

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite M30X Pro does not charge on current alternative

  Hello. My satellite M30X pro does not load when it is connected to the adapter sector, I have had the laptop for about a year and a half now

  Is this problem likely to be due to the charger doesn't work does not correctly? I don't want to spend £60 for a new charger, namely the charger works fine, and it's actually something else no longer works correctly!

  Thank you

  Is it possible to use the laptop with the adapter?
  No AC lights?
  If yes then the AC adapter works fine.
  In this case, if the battery is not either of the malfunctions of the battery or the thing will not on the motherboard.
  But mostly the battery fails.

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point